paul- wrote:
> Go into card control, and remove the Bluetooth extension, then select
> Analog Audio on the squeezelite page. Then reboot.
>
> If youve already changed to analog, then go to the extension page, and
> delete the extension pcp-bt.tcz
Much appreciated! Was able to update and it
paul- wrote:
> 6.0.0 Release Candidate 1 is posted. See
> https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support&p=944664&viewfull=1#post944664
> for details
I have four pCp's
2 x pi 4B Server/Players with IQ Audio DAC+
2 x pi 3B Players with IQ Audio DAC+
All
paul- wrote:
> If you grab the latest pcp6 update/image, you can play with the new
> overlay. Detailed configuration info is in the overlays/README file
>
> dtoverlay=st7789v-spi
That's great, thanks Paul
I did an insitu update, then replaced both modprobe commands in
/opt/bootlocal.sh with
paul- wrote:
> 6.0.0 Release Candidate 1 is posted. See
> https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support&p=944664&viewfull=1#post944664
> for details
Thanks! I updated from b09 in raspberry 4 (in WiFi mode) and all seems
ok!
Good job
---
6.0.0 Release Candidate 1 is posted.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNo
If you grab the latest pcp6 update/image, you can play with the new
overlay. Detailed configuration info is in the overlays/README file
dtoverlay=st7789v-spi
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.
That did the trick, thank you! It's a bit on the quiet side but I'm
guessing I'll need a DAC since it's coming out of my headphone jack and
right into my receiver by way of a 3.5 to RCA splitter.
I appreciate all the help!
Go into card control, and remove the Bluetooth extension, then select
Analog Audio on the squeezelite page. Then reboot.
If youve already changed to analog, then go to the extension page, and
delete the extension pcp-bt.tcz
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepag
Hi everybody. Long time lurker but never needed a help. Currently on
5.0.1 , but wanted to insitu update to the
latest beta 6.0. I am on Pi3B+. Upgrade fails as:
Status
You must remove the bluetooth extensions before continuing
Tried to remove all obvious bluetooth extensions and stopping it b
via AirPlay, UPnP/DLNA
myke2k7's Profile: http://forums.slimdevices.com/member.php?userid=69889
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
unix
myke2k7 wrote:
> sure
?
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=69872
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
u
corrobor wrote:
> Is there a way to stream Amazon music?
sure
myke2k7's Profile: http://forums.slimdevices.com/member.php?userid=69889
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
paul- wrote:
> If your not connected to the internet, then yes it's normal. Updates
> require internet connections.
The Pi is always connected to the internet via ethernet cable. Th other
updates like LMS or Squeezelite are running fine.
-
Sorry, I have a dac usb (into the amplifier). When I configure
squeezelite I see it in two lines. HW and PLUGHW. What is the
difference? I setted HW
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=69872
a491765 wrote:
> Does the shutdown button on pcp webpage prorperly unmount HDD and
> shutdown LMS to protect them from corruption ?
>
yes
*Home:* VBA 4TB (2.5)>LMS 7.9.2>Transporter, Touch, Boom, Radio (all
ethernet)
*Cottage:* VBA 3TB (2.4)>LMS 7.9.1>Touch>Benchmark DAC I, Boom, Radio
w/Ba
paul- wrote:
> You can shutdown the pi using many methods (Web page or ssh), but that
> will not remove the power from the rpi. The most popular way is to use
> a power controller that interfaces with a gpio pin.then you setup
> the shutdown/powerdown on the tweaks page.
>
> Pimoroni and a
Code:
HTTP/1.0 200 OK
Content-Type: audio/x-flac
icy-br: 917280
icy-name: pCP pi-Wohnzimmer line-in (flac)
icy-metadata: 0
Recording raw data 'stdin' : Signed 16 bit Little Endian, Rate 44100 Hz,
Stereo
arecord: set_params:1339: Sample format non available
If your not connected to the internet, then yes it's normal. Updates
require internet connections.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc
Use
https://www.balena.io/etcher/
to make the image on the sd card, no need to unzip the download.
29540
29541
+---+
|Filename: bottom.png |
|Download: http://forums.slimdevices.co
paul- wrote:
> Go to logs, there should be a log called pcp_streamer.log That might
> provide better info. Are you trying to test just recording/streaming?
> I would stop squeezelite just to make sure you have the streaming
> figured out.
Here is pcpstreamer log:
Code:
--
I burned the image using a Windows machine and was prompted to format
the disk in order to read it. I'll double check later but I don't think
I was able to open the SD card in Explorer without formatting it.
MohnJadden's P
You can use any machine, what do you use to burn the image?
The file gets renamed after use.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy
Is there a way to stream Amazon music?
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=69872
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
I have on Pi3B+ with Squeezelite/Jivelite, Hifiberry and Bluetooth
running. I did an Patch update today that worked without a problem.
The other Pi4 with Squeezelite and LMS running brought this message when
doing the Patch Update:
Code:
Checking: pcp-6.0.0-www.tcz
paul- wrote:
> The console is set for autologon.To be honest, I have not used the
> setup method in a long time... Dropping a wpa_supplicant.conf on the
> boot partition works so much easier.
Is there a way to do that without a Linux machine available other than
the Pi itself? I was able
The console is set for autologon.To be honest, I have not used the
setup method in a long time... Dropping a wpa_supplicant.conf on the
boot partition works so much easier.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(
a491765 wrote:
> Hi,
> How could i shutdown properly LMS, unmount attached usb and shutdown pcp
> + rpi ?
You can shutdown the pi using many methods (Web page or ssh), but that
will not remove the power from the rpi. The most popular way is to use
a power controller that interfaces with a gpio
I have set enableAudio=0 in
$HOME/.squeezeplay/userpath/settings/Playback.lua. However, this does
not keep jive_alsa from running and consuming CPU. Should jive_alsa run
with enableAudio=0?
D1eter's Profile: http://forums.
Go to logs, there should be a log called pcp_streamer.log That might
provide better info. Are you trying to test just recording/streaming?
I would stop squeezelite just to make sure you have the streaming
figured out.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: htt
paul- wrote:
> Gearhardc,
>
> Please press the "Patch" button on the pCP main page. Then reboot.
> That will bring you to www build 0002
>
> You will need to make sure to resolve your asound issue first. If you
> need a fresh copy of /etc/asound.conf, I have included the base version
> in t
paul- wrote:
> After you set the wifi parameters, you need to backup, then reboot.
>
> Setup with keyboard and mouse instructions are listed here Scroll
> down to the second section.
>
> https://www.picoreplayer.org/how_to_setup_wifi_on_pcp_without_ethernet.shtml
>
> of course the first
paul- wrote:
> After you set the wifi parameters, you need to backup, then reboot.
>
> Setup with keyboard and mouse instructions are listed here Scroll
> down to the second section.
>
> https://www.picoreplayer.org/how_to_setup_wifi_on_pcp_without_ethernet.shtml
>
> of course the first
Hi,
I encountered 2 times a USB attached HDD corruption on bad shutdown i
guess.
How could i shutdown properly LMS, unmount usb and shutdown pcp + rpi ?
a491765's Profile: http://forums.slimdevices.com/member.php?userid=
33 matches
Mail list logo
