Hi Friends, a Little question. I'm getting another music point in
another room. So i Need only picoreplayer with squeezelite. I have to
buy another Raspberry. The question Is: Pi zero w working well with
picoreplayer or Is It slow? Otherwise i Will buy a rasp 3 or 4
Thanks
-
As a player it is fine.
It can also run LMS but then it does start to feel slow.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile: http://forums.slimdevices.com/member.ph
paul- wrote:
> We work with git, so all revision control is tracked. So yes, its
> there. The card seems to lockup if you do things in the wrong order.
>
> What I would do is make sure squeezelite opens the card in 16 bit mode.
> Put a 16 in this box on the squeezelite page.
>
> 29727
Hi
Another question. Now i have picoreplayer server+player into Raspberry
4. In my House i have a Raspberry2 used as router access point with
raspbian.
Question: if i switch the Raspberry, so if i put raspbian into Raspberry
4 installing also LMS and putting picoreplayer into Raspberry 2 only
player
I brought my pCP based controller home from the office. Plugged it in,
and it doesn't re-boot. It stops with "Missing WWWROOT". Any idea what I
could do there?
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/m
All you did is move it? hmmm. Doesn't make sense.
About the only way for that to happen is if pcp-6.0.0-www.tcz is not
loaded.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donat
ian_heys wrote:
> Hi Paul. Everything working fine on the codec. Is there a way of
> changing the meta data in the stream output. It's not possible to change
> it in the LMS interface. Changes made using the editing tool for
> playlists don't stick and I can't find anything in the pCp config tha
About the only way for that to happen is if pcp-6.0.0-www.tcz is not
loaded.
How could I verify/investigate that? Or is it not worth it?... That
thing is quickly set up.
But as it's the same unit that caused problems during the upgrade I was
wondering whether that SD card is about to give up
Easiest way is with a keyboard and monitor. You can run 'mount' and see
if that extension is mounted.
How many times have you tried to boot it? What kind of pi is it? I
have occasionally seen on a pi zero where during boot the kernel cannot
create loop devices dynamically fast enough. But
Easiest way is with a keyboard and monitor. You can run 'mount' and see
if that extension is mounted.
pcp-6.0.0-www.tcz is mounted on /tmp/tcloop/pcp-6.0.0.-www. But it's
almost empty. Only has a few libedit related files/links in there.
How many times have you tried to boot it?
5-10x
W
paul- wrote:
> The meta-data is generated by the tcp server based on what type of input
> you have selected, there is no way to override it.
I was thinking of changing the stream title, but I can have the playlist
title do more or less the same thing. I have a custom icon which I'm
going to int
Hi everyone,
I recently had my first experiences with PiCorePlayer as server+player
and I am very impressed.
I was using a DAC Audiophonics i-sabre ES9023. They have some
instructions to install the DAC on PiCorePlayer:
'Audiophonics tutorial DAC PiCorePlayer'
(https://www.audiophonics.fr/fr/blo
shunte88 wrote:
> a quick scan of the forum it looks like the library is included in
> extension *i2c-tools-dev*
>
> add the extension and then check that *all* libraries are available with
> the following
>
>
> >
Code:
> > ldd lmsmonitor
> >
>
Hi all,
When PcP includes LMS I like solutions with switch-off button to avoid
brutal shutdowns. Also it is quite an elegant solution to start the
device, instead of getting to the wall to plug/unplug etc.
I guess this is still possible to use a GPIO power button with this
display? PcP in its in
Sounds like the extension is corrupted.but that would have happened
after download.
The MD5 is only checked at download.it does not get checked at each
boot.
You can try to download the file from the repo manually and copy to the
card.
piCorePlayer a small player for the Raspberry Pi
You would have to use an i2c bus based GPIO extender.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donat
the OLED library is included in the archive and is copied to the shared
library folder when you execute the gomonitor script
check where the files where extracted, and ensure they are located in
/mnt/mmcblk0p2/tce/
note that I updated the binaries with the gomonitor edit as well as
adding a lit
shunte88 wrote:
> the OLED library is included in the archive and is copied to the shared
> library folder when you execute the gomonitor script
>
> check where the files where extracted, and ensure they are located in
> /mnt/mmcblk0p2/tce/
>
> note that I updated the binaries with the gomonit
Hi all,
In the audio-settings part of LMS there is a remark that states that
'Lame' is needed for best playback of MP3 files. Is it meant for just
encoding or for playback too, I wonder.
Though I do not succeed in installing the plugin by pointing to the
opened file on the LMS page. This does no
truscellino wrote:
>
>
> This overlay choice is not in PcP 6.0.0. Choosing "ESS 9023 DAC" instead
> works, but there are no configuration options available.
>
>
> Thanks, Marc
29768
+---+
|Filename: ess9023dac.png
29769
+---+
|Filename: lamepcp.png |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29769|
+---+
--
The only cards using ESS products that officially supported are the.
Audiophonics iSabre Q2M and the Allo Katana.
All other DACs "might" work with a Generic i2s card.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://ww
corrobor wrote:
> Another question. Now i have picoreplayer server+player into Raspberry
> 4. In my House i have a Raspberry2 used as router access point with
> raspbian.
> Question: if i switch the Raspberry, so if i put raspbian into Raspberry
> 4 installing also LMS and putting picoreplayer i
I do try this but still no display!/mnt/mmcblk0p2/tce$ pwd && ls -ltra
/mnt/mmcblk0p2/tce/
/mnt/mmcblk0p2/tce
total 604
-rw-rw-r--1 tc staff 57 Jan 1 1970 onboot.lst
-rw-rw-r--1 tc staff 2824 Jan 1 1970 pcp_resize.log
drwxrwxr-x2 tc staff
OK, that makes sense. Thank you very much for quick replies.
Marc
truscellino's Profile: http://forums.slimdevices.com/member.php?userid=69928
View this thread: http://forums.slimdevices.com/showthread.php?t=111835
_
Man in a van wrote:
> 29769
Thank you Man!
I overlooked it. Was the first thing i tried, but was looking
alphabethicly for the 'L' of Lame! Dummy I am!
ettepet's Profile: http://forums.slimdevices.com/member.php?userid=6
corrobor wrote:
> Hi Friends, a Little question. I'm getting another music point in
> another room. So i Need only picoreplayer with squeezelite. I have to
> buy another Raspberry. The question Is: Pi zero w working well with
> picoreplayer or Is It slow? Otherwise i Will buy a rasp 3 or 4
> Tha
You can try to download the file from the repo manually and copy to the
card.
That indeed did improve the situation. But then the network adapter
still wasn't found, then the soundcard, then... eventually I started
from scratch and am back in business now. Thanks!
--
Michael
___
28 matches
Mail list logo
