Thank you very much! That fixed it. :)
martymcbro's Profile: http://forums.slimdevices.com/member.php?userid=71232
View this thread: http://forums.slimdevices.com/showthread.php?t=111502
__
Well, that is lovely. I was missing a kernel patch in my kernel build
for pCP7. That caused the overlay dtb to be missing from the image.
Luckily, there were no changes to the overlay between the last version
of pCP and this one, so it's compatable.
Open a ssh session, and do this
Code:
---
Reboot :confused:
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=113512
___
unix m
Greg Erskine wrote:
> These tabs are fairly robust.
>
> It would require something to do with MAC addresses changing, are you
> swapping between wired and wifi, or have you changed the standard LMS
> port numbers?
I did start with wired ethernet but then configured to use wifi and
unplugged.
These tabs are fairly robust.
It would require something to do with MAC addresses changing, are you
swapping between wired and wifi, or have you changed the standard LMS
port numbers?
Greg Erskine's Profile: http://forums
Greg Erskine wrote:
> The controls should just work. No extra fiddling is required and doing
> so will only cause problems in the future.
I won't fiddle, but they don't work for me with a fresh install.
Not a big deal since this is not the primary way to control the music
anyway, but odd the
AlecSp wrote:
> Mine just work - not sure what you've done to find this situation.
>
> That said, why aren't you simply running this player from the LMS web
> page on your LMS server? Far more useful - and I don't think I've eer
> used the pCP contols until now, just to have a quick check if t
doggod wrote:
> Ok so I checked the pcp.cfg file and it sure looks like my correct
> settings is saved there but sadly still no go, i.e my server doesn.t
> wake up when PcP boot.
>
> WOL="yes"
> WOL_NIC="eth0"
> WOL_LMSMACADDRESS="my_servers_mac"
>
> Had to google a bit to find the correct com
TomS wrote:
> Anyway, I noticed the simple music controls at the top of the pCP web
> page, but they do not seem to work. The play/stop/next track/prev
> track/vol up/vol down 'buttons'. They do nothing for me.
Mine just work - not sure what you've done to find this situation.
That said, why
The controls should just work. No extra fiddling is required and doing
so will only cause problems in the future.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums
Just starting to play with pCP. I have successfully got it running on a
rPi 3b (64-bit). Right now playing out of the rPi headphone jack into
an amp, but will likely add a hifiberry dac. All is good.
Anyway, I noticed the simple music controls at the top of the pCP web
page, but they do not
Hi,
I'm having the same problem. The pirateAudio board doesn't display
anything on piCorePlayer 7.0 after following the instructions on page
35. I already double checked them. I'm using the board on a pi zero W.
You can find my dmesg in the attachments. What else do you need?
Regards
+---
latest pushed to github inclusive binary updates
hopefully all bases are covered
have at it
I have to admit I don't think I've used the power button the entire time
I've run LMS - 13 years or so?
I actually added the clock and weather because my devices are always on
I can't actually remember t
No I think that's confusion on my part cos I checked when I opened it up
to take the pics, as I say I have done other projects too. Waveshare in
DSI format is what I used for bathroom streamer we were discussing
initally.
Thanks again Gary! Maybe you changed out the display on your hifi unit
since comment 8? I thought it was the HDMI version of the 4.3"
Waveshare but no big deal, I was just confused a little. I know things
evolve especially when you have a 3d printer and are in COVID lockdown!
---
My new factory-fresh Argon M.2 adapter tray arrived today (same firmware
as the original one had: 140704a1), so I've done some comparative
speed tests. And after all that there's no difference between this one
and my original version(firmware upgraded to 141126a1ee82)! Using the
same M.2 SS
ralphy wrote:
> Using an ALSA output prefix other than hw: with the -o option "hides"
> some or all of the physical capabilities of the audio hardware from
> squeezelite behind the ALSA subsystems.
I Need to automatcly "Press" the squeezelite restart button when dac Is
plugin. I can write udev r
Using an ALSA output prefix other than hw: with the -o option "hides"
some or all of the physical capabilities of the audio hardware from
squeezelite behind the ALSA subsystems.
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox client builds'
(https://sourceforge.net/project
corrobor wrote:
> Rotel a12.
>
> I think that the solution can be to write a udev rule that start
> squeezelite when dac Is plug-in.
> USB power (allowing the rear USB jack to provide power to a Google
> Chromecast audio dongle, Rotel says), auto-off inactivity timer,
> signal-sensing for a
@corrobor - you posted just before me, and evidently have different
results. I think my case is slightly different, in that my USB DAC is
one of several inputs built into my amp (a Hypex DLCP). Previously, if
I had the amp switched to 'optical' instead of 'USB' while the Pi was
booting, the DAC
ralphy wrote:
> Try enabling the Close output setting (-C) option with a value of 5.
>
> It's suppose to allow squeezelite to start and wait for the device to
> appear.
>
> You need to use the hw:CARD= device with the -o option not plughw:CARD=
Thanks Ralphy - that's done the trick in my case
ralphy wrote:
> Try enabling the Close output setting (-C) option with a value of 5.
>
> It's suppose to allow squeezelite to start and wait for the device to
> appear.
>
> You need to use the hw:CARD= device with the -o option not plughw:CARD=
Not works.
Now, my dac Is Power off. Squeezelite
Man in a van wrote:
> Doing which of the suggestions ?
>
> Which amp/ dac do you have ?
>
> Are they seperate devices or an all-in-one?
Rotel a12.
I think that the solution can be to write a udev rule that start
squeezelite when dac Is plug-in.
-
Try enabling the Close output setting (-C) option with a value of 5.
It's suppose to allow squeezelite to start and wait for the device to
appear.
You need to use the hw:CARD= device with the -o option not plughw:CARD=
Ralphy
*1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio
'Squeezebox clie
Paul Webster wrote:
> Try this
> https://forums.slimdevices.com/showthread.php?109934-LMS-could-not-reestablish-any-USB-connection-after-USB-Dac-is-disconnected&p=930865&viewfull=1#post930865
I'm not sure this will help in this case. That tweak means that once
Squeezelite has started, it doesn
corrobor wrote:
> Yes i'm doing this but i'm looking for an elegant solution that start
> squeezelite when the dac Is plugin, an automation...
Doing which of the suggestions ?
Which amp/ dac do you have ?
Are they seperate devices or an all-in-one?
-
You can put the piCoreplayer Squeezelite web page on a smartphone as a
desktop shortcut and use that to restart Squeezelite
or maybe use the Material Skin interface (also as a desktop shortcut) to
switch the player of and then on ?
--
Man in a van wrote:
> @corrobor
>
> Does the amp/dac have a standby mode ?
> If you power on the amp/dac at a regular time (maybe a timer on the
> power switch) you could run a cron job on the pi for a restart a few
> minutes later).
> Use a ssh command from your smartphone, tablet, or PC to re
Try this
https://forums.slimdevices.com/showthread.php?109934-LMS-could-not-reestablish-any-USB-connection-after-USB-Dac-is-disconnected&p=930865&viewfull=1#post930865
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc), kcrw,
supla finland
@corrobor
Does the amp/dac have a standby mode ?
If you power on the amp/dac at a regular time (maybe a timer on the
power switch) you could run a cron job on the pi for a restart a few
minutes later).
Use a ssh command from your smartphone, tablet, or PC to restart the pi
after amp/dac power up
Man in a van wrote:
> I only install Mr Webster's plugin and bpa's HLS repo :):p
>
> http://bpa-code.github.io/bpaplugins/repo-playhls-v2.xml
>
> ronnie
Thank you, I will give this a try, once I will be back on Saturday.
Thank you very much, regards Pommes
The Earth Has Music For Those Who
Pommes wrote:
> Is little bit off topic, I tried FIP HLS, but on my system it will only
> play the AAC stream. I have installed lame and FFMpeg and The hls Plugin
> . Could you give me a hint, please?
> Thanks
> Pommes
Hi. When Raspberry restart, if dac Is Power off, squeezelite cannot
start b
slartibartfast wrote:
> Is that necessary?
>
> Sent from my Pixel 3a using Tapatalk
:-) no
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=69872
View this thread: http://forums.slimdevices.com/showth
Pommes wrote:
> Is little bit off topic, I tried FIP HLS, but on my system it will only
> play the AAC stream. I have installed lame and FFMpeg and The hls Plugin
> . Could you give me a hint, please?
> Thanks
> Pommes
I only install Mr Webster's plugin and bpa's HLS repo :):p
http://bpa-code
Pommes wrote:
> Is little bit off topic, I tried FIP HLS, but on my system it will only
> play the AAC stream. I have installed lame and FFMpeg and The hls Plugin
> . Could you give me a hint, please?
> Thanks
> PommesWhich HLS plugin did you install?
Sent from my Pixel 3a using Tapatalk
-
Man in a van wrote:
> Try this;
>
> set an autoplay favourite, when the pi restarts, it should output the
> stream to the dac, when the dac/amp is powered on it should be already
> playing:)
>
> 32951
>
> ronnie
Is little bit off topic, I tried FIP HLS, but on my system it will only
play th
corrobor wrote:
> Another question: i have an USB dac (the amplifier's dac).
> I have this little issue. I set "USB" in squeezelite settings and It
> works well (Sorry Is It Better to set hw:card or hwplug:card ?)
> The little issue is this: i Power on the amplifier (and its dac) only
> when i u
The screen for the HiFi version is a 'Elecrow'
(https://www.elecrow.com/5-inch-hdmi-800-x-480-capacitive-touch-lcd-display-for-raspberry-pi-pc-sony-ps4.html)
5" HDMI with capacitive USB touchscreen. Nice and and good value but
with the addition of the connectors and thier RA adapters probably mak
corrobor wrote:
> I do a reboot rule every day at 0 amIs that necessary?
Sent from my Pixel 3a using Tapatalk
slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609
View this thread: http://for
slartibartfast wrote:
> How often do you reboot you Pi? Mine is on 24/7.
>
> Sent from my Pixel 3a using Tapatalk
I do a reboot rule every day at 0 am
corrobor's Profile: http://forums.slimdevices.com/member.php?userid=6
It Is possibile to do this?
I need to start or restart squeezelite when i Power on my USB dac.
Because if dac Is off squeezelite dont start and i need to start It
manualy.
By udev event?
corrobor's Profile: http://forums.
corrobor wrote:
> Another question: i have an USB dac (the amplifier's dac).
> I have this little issue. I set "USB" in squeezelite settings and It
> works well (Sorry Is It Better to set hw:card or hwplug:card ?)
> The little issue is this: i Power on the amplifier (and its dac) only
> when i u
I received a helpful reply to my question about the permitted rate of
image requests from the Fourmilab Earth viewer. Although the 'service
denial' message tells me that I've made too many requests within a
10-minute period, the rule itself is apparently that if you make 100
requests without a 1
Another question: i have an USB dac (the amplifier's dac).
I have this little issue. I set "USB" in squeezelite settings and It
works well (Sorry Is It Better to set hw:card or hwplug:card ?)
The little issue is this: i Power on the amplifier (and its dac) only
when i use It. The Raspberry Is Alw
Another question: i have an USB dac (the amplifier's dac).
I have this little issue. I set "USB" in squeezelite settings and It
works well (Sorry Is It Better to set hw:card or hwplug:card ?)
The little issue is this: i Power on the amplifier (and its dac) only
when i use It. The Raspberry Is Alw
45 matches
Mail list logo