fuero wrote:
> The software was obviously written with the assumption that the network
> information it gathers from the interfaces available is what the outside
> world can reach it under.
> While this *does* work for running on dedicated hardware or with --net
> host, it doesn't work in more
The software was obviously written with the assumption that the network
information it gathers from the interfaces available is what the outside
world can reach it under.
While this *does* work for running on dedicated hardware or with --net
host, it doesn't work in more elaborate environments
I have successfully upgraded to an LMS 8.0.0 on an arm system and Perl
5.14.2. All newer versions fail when starting the LMS because apparently
the Perl version is not supported. Where can I find the specification
which Perl versions are supported by 8.1?
I believe the _all.deb should still
mherger wrote:
>
> Yes. Running LMS in Docker shouldn't change how it communicates with the
>
> outside world.
>
The software was obviously written with the assumption that the network
information it gathers from the interfaces available is what the outside
world can reach it under.
While
Guten Abend,
ich habe auf einem arm-System (armv7l debian 7.11) mit Perl 5.14.2
erfolgreich auf ein LMS 8.0.0 aktualisiert. Alle neueren Versionen
schlagen beim Start des LMS fehl, weil scheinbar die Perl-Version nicht
unterstützt wird. Wo finde ich die Angabe welche Perl-Versionen von 8.1
corrobor wrote:
> P.S. i recently bought a rpi4: It sounds Better than the zero.
Interesting.
Did you use the same DAC on both?
TinyTommy's Profile: http://forums.slimdevices.com/member.php?userid=69501
View this thread:
Huey11 wrote:
> Watchtower has a clean option which does the pruning for you?
I hadn't noticed that, so thanks - just checked the documentation and
I'm now trying out that option :D
1x Touch
4x BOOM
LMS 8.x:stable on Pi4B
jeroen2 wrote:
> Hi Bla, you can check out this and let me know if this works for you.
> https://forums.slimdevices.com/showthread.php?113693-Using-the-RemotePi-board-with-pCP=1004729=1#post1004729
>
> Ciao, J.
hello jeroen, was working perfect, have written some comments in the
instruction
Hi,
2 days ago, my RemotPi board (for Raspi 4B with external IR and LED)
arrived from Thailand (I'm living in Germany) without any additional
costs to pay for VAT or tariffs.
I installed the board according the instructions from above and
everything was working as expected immediatly. I could
corrobor wrote:
> I had upgrade my zero without any problem.
>
> P.S. i recently bought a rpi4: It sounds Better than the zero.
Weird. I get
Code:
Error retreiving /12.x/armv6/tcz/alsa-modules-5.4.83-pcpCore.tcz.md5.txt
Error retreiving
rwanou wrote:
> Hi all and Thanks for keeping the project alive.
>
> One of the Pis of my setup is Raspberry Pi ZERO, which runs on ARMV6. I
> tried to upgrade to PCP7, but I get error downloading some of the
> modules.
>
> Is PCP7 tested/supports RPI zero? Is there any plan for the missing
>
rwanou wrote:
> Hi all and Thanks for keeping the project alive.
>
> One of the Pis of my setup is Raspberry Pi ZERO, which runs on ARMV6. I
> tried to upgrade to PCP7, but I get error downloading some of the
> modules.
>
> Is PCP7 tested/supports RPI zero? Is there any plan for the missing
>
apn wrote:
>
> At some point I want to add a cron to prune the orphaned container image
> files (the previous versions before watchtower upgraded them).
Watchtower has a clean option which does the pruning for you?
Hi all and Thanks for keeping the project alive.
One of the Pis of my setup is Raspberry Pi ZERO, which runs on ARMV6. I
tried to upgrade to PCP7, but I get error downloading some of the
modules.
Is PCP7 tested/supports RPI zero? Is there any plan for the missing
modules to be ported one day?
Hi Paul,
my task ist to play musik from old analog output device.
1x Picoreplayer with Hifiberry DAC/ADC pro, 3x Picoreplayer with
Jivelite 7" Display und IQaudio DigiAmp+, 2 Picoreplayer RPI4+ LMS8,
Marantz PM-15S1 amplifier.
15 matches
Mail list logo
