That should have been corrected in 6.0.1. If you system is missing
this, there is a chance other things are messed up too.
However, I pushed an update to the insitu update for 7.0.0 that should
correct this.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
Your docker run command is wrong. You should post in the LMS docker
thread.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Hi,
Long time since I've posted on here - seems every time I want to solve
an audio problem, LMS provides the answer! :)
Got the http streamer tweak going to play my turntable via line in, so
far so good...
Works great via the MP3 stream, but not via the FLAC stream - the log is
kicking up a
TRY with SUCCESS on 21.02.0 (and update of dockerd docker docker-compose
luci-dockerman)
MVEBU ARM64 EspressoBin-Ultra...
Code:
root@ultra:~# cat /etc/config/dockerd
# The following settings require a restart of docker to take full effect, A
reload will only have
paul- wrote:
> You should be able to add noaudio to the dtoverlay, and get back to the
> old audio driver and device.
>
> https://forums.slimdevices.com/showthread.php?103330-Jivelite-for-piCorePlayer=1027716=1#post1027716
Almost works, appears to play but no sound. Has me puzzled.
I would try these first
hw:CARD=FXD502BT,DEV=0
front:CARD=FXD502BT,DEV=0
iec958:CARD=FXD502BT,DEV=0
But any of them might work the way you want. I'm not sure what the
differences are in the DEV=0 and DEV=1
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
I should have remembered from my CEC experiments.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla
finland, abc australia, cbc/radio-canada and rte ireland
Very confused ! It was a too light usb cable between the raspberry and
the amplifier.
the amplifier indicate connection in usb with 48khrz audio but the rasp
didn't find...
now, I have all the option with the amplifier available.
default
plugequal
equal
hw:CARD=Headphones,DEV=0
You should be able to add noaudio to the dtoverlay, and get back to the
old audio driver and device.
https://forums.slimdevices.com/showthread.php?103330-Jivelite-for-piCorePlayer=1027716=1#post1027716
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
diode84 wrote:
> It's a plain 7 inch screen working on HDMI input and yes it was fine on
> pCP 7.
> I have it set to HD Skin 640x480 normally although it will run higher.
HDMI changed significantly in pCP 8.
I suspect that one of the pCP team will know how to get it working - but
in the meantime you could do some more investigation.
Maybe the output device should be /dev/fb1 rather than /dev/fb0
The Jivelite section in the Tweaks page (where you installed it)
includes the ability to set a screen
Would love to see an update to the code if only a branch.
-MrD
===
3 PiCore Players
1 Transporter (dead)
2 Squeezebox v3 (1 dead, 1 resurrected)
Linux x86-64 SlimServer 8.1.1
MrD's Profile:
Paul Webster wrote:
> Was it an upgrade rather than a fresh install?
>
> If upgrade then maybe try uninstall and reinstall of Jivelite.
It wasn't an upgrade but a clean install and I have uninstalled and
reinstalled Jivelite.
Is there any way to alter the skin from the web interface.
Was it an upgrade rather than a fresh install?
If upgrade then maybe try uninstall and reinstall of Jivelite.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla
Paul Webster wrote:
> Screen resolution perhaps.
> What sort of screen is it and did it work with pCP 7?
It's a plain 7 inch screen working on HDMI input and yes it was fine on
pCP 7.
I have it set to HD Skin 640x480 normally although it will run higher.
Screen resolution perhaps.
What sort of screen is it and did it work with pCP 7?
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla
finland, abc australia,
Paul Webster wrote:
> WiFi-only is fine (after all there are lots of RPi Zero players).
> See
> https://docs.picoreplayer.org/how-to/setup_wifi_on_pcp_without_ethernet/
Thanks Paul, thats perfect
Jivelite however is a problem as it will only give me a brief
piCoreplayer screen then nothing
For some strange reason (to me), i wasn't able to flash a working
version of Moode to a micro sd.
No such trouble with Volumio though, so i tried that instead.
But more or less as expected, there were still dropouts. I guess it is
now safe to conclude, the pCP software is not the root cause to
diode84 wrote:
> Hello
> I am about to install pCP8 to a Pi3B+ and wondered if I still need
> ethernet. If not how do I do it without?
> Thanks
> diode84
WiFi-only is fine (after all there are lots of RPi Zero players).
See
Hello
I am about to install pCP8 to a Pi3B+ and wondered if I still need
ethernet. If not how do I do it without?
Thanks
diode84
diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983
View this thread:
I'm glad you managed to repeat my efforts - and this is a reminder that
I do need to write it down in a way that makes it easy for others to
repeat as well.
Did you use the IEC device like I did?
I suspect it will need input from pCP Paul- to see if it is possible to
get a higher rate but I
21 matches
Mail list logo