Thanks a million Greg! That did it. Followed your instructions, added
those parameters and saved it. Only funny thing was that the unmount
would not work. Did an fuser, found the process still holding the
mount. Did the fuser again with the kill parm. As soon as i hit enter
- *poof* there
Thanks Greg for the suggestions - backup saved my changes so I don't
have to re-create them each time - Thanks!
Found the sound config -
[ INFO ] PLAYBACK hardware Devices
List of PLAYBACK Hardware Devices
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Still chasing the rabbit - thanks to both Greg and Roland0 for their
assistance.
Greg - good advice - will dig into the PiCore documentation to
understand persistance, and how to get a change to survive a reboot.
Roland0 - question around your comment at the start of your code -
(note: adjust
Ok - that plan did not work - the HDMI option appears to be buried in
the config file. So here's where I'm at trying to start a second
instance.
I've modified the player to output to the HDMI, restarted the server so
it's playing on HDMI. Then I copied /usr/local/sbin/config.cfg to
So, based on Greg's suggestion, I've done a little looking, and I need
to add something such as this:
sudo /mnt/mmcblk0p2/tce/squeezelite-armv6hf -n "HDMI-Sound" -o
stereosurround -a 80:::0: -m ab:cd:ef:12:34:05 -C 1 -G 7:L -z
As per my readings, this command should be placed in add the command
Greetings everyone - just built piCorePlayer 3.1 on pi 3 board as my
Duet reciever died a horrible death. On my Duet, I could send the
output to both analog and optical outputs - I sent one to my receiver
and one to my whole house sound system. I would like to send the output
from piCorePlayer
