Grumpy Bob wrote:
> I have set up a Raspberry Pi as a piCorePlayer/LMS server with a
> momentary switch that has an LED. It uses the 'On-Off shim'
> (https://shop.pimoroni.com/products/onoff-shim?variant=41102600138) set
> as described 'here'
> (https://forums.slimdevices.com/showthread.php?1097
Hi again,
I found one item which I don`t understant. When in Tweaks I have choose
only shutdown on GPIO 17 is possible to shutdown (after shutdown red LED
is active) and I`m able to wake up Rpi by short GPIO3 with GND. When
option poweroff is on any GPIO is active than after shutdown all LEDs on
I did a new installation on new SD card and now is fine, I can edit
config file.
Even I2C is disable, when shutdown on GPIO3 is active, after reboot
Squeezeplayer is not running. With any other GPIO work fine, except
GPIO3
---
Thank You.
I took another new SD card, did a clear new installation and looks fine
- I can edit "config" file.
Unfortunatelly disable I2C did not resolve problem. If GPIO 3 is choosen
for "shutdown" Squeezelite is not starting and not running. Any other
GPIO is fine, except 3. GPIO3 is from de
See below
https://imgur.com/bkySK7W
Player and LMS working fine, I can do some changes from Tweaks level.
+---+
|Filename: obraz_2022-12-19_204035313.png |
|Download: http://forums.slimdevices.com/attach
Hi,
Finally I went with Rpi4 with DAC IQAudIO Pro ;)
maciekelga's Profile: http://forums.slimdevices.com/member.php?userid=73213
View this thread: http://forums.slimdevices.com/showthread.php?t=117174
___
I played a little bit with my PcP on RPi4. I have setup of shutdown
under 'Poweroff/Shutdown Overlays'- set gpio shutdown to 'yes', '3',
'Active Low','Pull up". So when I short to GND GPIO 3 Rpi shutdown, when
I remove GND from GPIO3 it start up but SqueezeLite is not running, I
think I2C is a pr
Thank You, so one is output another is input in fact. Thank You.
So I think I need to use this On-Off shim, there is no other way. In
Rpi3 there was an option to wake up with short GPIO 3 to GND, I think is
disable in Rpi4. There was another option with Python script but from
what I found Python
When You press one time it shutdown and next press the button start up
PiCore Player? What is a different between poweroff and shutdown?
I want to control by level of GPIO:
HIGH = start PCP
LOW = stop PCP
maciekelga's Pr
Hi,
I have PiCore on RPi3 and need two functionality:
1. Set up one pin as output to connect external LED to see if PiCore is
running or not.
2. Is possible to set up pin as on/off? I mean if is low level on GPIO
than PiCore is should be disable, when is high should be active.
Is anybody who ca
Thank You.
Is anywhere any tutorial how to add server and player on Debian or VM /
Proxmox?
maciekelga's Profile: http://forums.slimdevices.com/member.php?userid=73213
View this thread: http://forums.slimdevices.com/showt
Hi,
I`m wondering if is possible to run LMS and client on Proxmox virtual
machine/LXC on same device? I have set up Proxmox with HA and OMV on HP
T620. It would be really nice to have a LMS and Player (client) on same
device, than I no need additional Rpi for player. I was able to install
and LMS
12 matches
Mail list logo
