I will try other choice but it works fine with sysdefault:CARD=FXD502BT
I'm happy !!!
Yvanq's Profile: http://forums.slimdevices.com/member.php?userid=71808
View this thread:
I would try these first
hw:CARD=FXD502BT,DEV=0
front:CARD=FXD502BT,DEV=0
iec958:CARD=FXD502BT,DEV=0
But any of them might work the way you want. I'm not sure what the
differences are in the DEV=0 and DEV=1
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
Very confused ! It was a too light usb cable between the raspberry and
the amplifier.
the amplifier indicate connection in usb with 48khrz audio but the rasp
didn't find...
now, I have all the option with the amplifier available.
default
plugequal
equal
hw:CARD=Headphones,DEV=0
paul- wrote:
> lsmod output from a working setup is critical.
Oups, I didn't understood to make a test from raspberry to phone, I made
from phone to amplifier.
I'm a little bit neewbee...:rolleyes:
Yvanq's Profile:
lsmod output from a working setup is critical.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Yvanq wrote:
> I will make a try this afternoon with moodaudio to see if it comes from
> my amplifier or picoreplayer.
If you do, try lsmod on moode
I don't see the usb_snd listed from your phone output
ronnie
Man in
Man in a van wrote:
> MoOde audio uses Raspberry PI OS Buster Lite as its base.
>
> Therefor I'm guessing that if you install that OS on a card, add
> squeezelite; it should work.
>
> ...
> But first try the stuff I suggested, it's all part of the elemination
> process:)
>
> ronnie
I will
The boot log shows that the dac is not being recognised properly by pCP
Did you try
go to Tweaks > USB Audio tweaks > enable OTG-Speed > save and reboot >
check the output settings on the squeezelite Settings tab
If the tweaks page does not work, make a post on the pCP v8 thread, give
a
Hello, thanks a lot for this help.
I tried my phone usb output on the amplifier with success
lsmod returns
Module Size Used by
spidev 20480 0
snd_soc_bcm2835_i2s16384 0
raspberrypi_hwmon 16384 0
i2c_bcm283516384 0
snd_soc_core
Yvanq wrote:
> Hi
> RASPBERRY PI 2 B Raspberry Pi 2 B v1.1
>
> A friend of mine had some trouble with the same amplifier and solved by
> installing moodaudio, I want to stay with picoreplayer I appreciate a
> lot.
>
MoOde audio uses Raspberry PI OS Buster Lite as its base.
Therefor I'm
Hi
RASPBERRY PI 2 B Raspberry Pi 2 B v1.1
Yes the pi is used as player (I have LMS installed on my Synology nas)
I tried a smartphone trough usb entry of the amplifier without problem.
When the pi is connected the rate 44.1khz is marked on the amplifier.
A friend of mine had some trouble with
What I would suggest is that:
a) Try and make sure the usb input works (so that we don't waste time
:))
b) If that is not possible,
connect the rpi to the dac/amp, use a usb 2 socket
power on the dac/amp select the usb input and then power on the rpi
check if the Squeezelite settings
HI Yvan
>From that screenshot it would appear that the usb dac is not being
recognised by pCP.
I have some more questions:
Which raspberrypi are you using ?
Is the pi only used as a player ?
And have you checked that the input actually works ?
>From the Audiophonics info:-
USB interface
I use picoreplayer 8
35465
35466
+---+
|Filename: picoreplayer usb2.jpg|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=35466|
@ Yvanq or YvanQue (are both the same person ?) :confused:
Please say which version of pCP you have installed.
On the Main page of pCP scroll to the bottom and enable beta mode
(ignore the warning)
On the Squeezelite Settings tab
Change Squeezelite settings > Output setting > click on the
I try to make some change but still have minimum output proposition and
squeezerlite don't run in usb output mode.
What can I send (log or screen capture) to help to solve this problem ?
Yvan
Yvanq's Profile:
Ok, I'll try when I'm back home tomorrow.
YvanQue's Profile: http://forums.slimdevices.com/member.php?userid=72002
View this thread: http://forums.slimdevices.com/showthread.php?t=114952
There have been some problems with this chip for some time
https://www.raspberrypi.org/forums/viewtopic.php?t=54903
try using the squeezelite output beginning with the word
front=
If that does not work, some logs will be needed and possibly a screen
shot or two
Details of which pCP
the dac amplifier
https://www.audiophonics.fr/fr/amplificateur-full-digital-fda/fx-audio-d502bt-amplificateur-fda-tas5342a-sortie-subwoofer-bluetooth-50-2x60w-4-ohm-noir-p-14523.html
YvanQue's Profile:
Hello everybody
A friend of mine had the same problem with the same amplifier and he
solved by installing moodaudio witch seems to recognise the USB SA9023
DAC of the amplifier.
I don't wan't something else than picoreplayer, how can I solve this
problem ?
I tried with picoreplayer release 6-7
20 matches
Mail list logo