I was thinking SoX in a custom-config could be used to do this so long
as the balance change is fixed, but don't see a simple "balance" switch
in the SoX manual. Maybe split the channels, gain one side, and
recombine? Of course, would only apply to sources from LMS.
---
SlimChances wrote:
> That makes sense, but would have been a nice feature to keep in the
> newer models. I realize most people wouldn't need it though
The IPK3 processor was a network processor (i.e. optimised for packets
and protocols and used in bridges, router, AP etc) and not a DSP.
--
bpa wrote:
> IIRC They were done in hardware in SB1 as well as Bass & Treble and
> these features were never available in later players using IP3K
> processor such as SB2 except Boom which has an additional DSP which
> enabled some audio processing such as audio "spacing".
That makes sense, but w
SlimChances wrote:
> The speakers are on a bookshelf. One speaker is closer to where I sit
> than the other, I just wanted to compensate for this. Not a big deal. I
> wonder why Sean Adams(?) removed the fade and balance options they were
> useful features.
IIRC They were done in hardware in SB1
d6jg wrote:
> I don’t believe there is. It shouldn’t be necessary unless
> you have a really odd speaker placement.
>
> I think you can do it with piCorePlayer on Pi by twiddling the Alsa
> Settings.
>
>
> Sent from my iPhone using Tapatalk
The speakers are on a bookshelf. One speaker is clos
SlimChances wrote:
> Is there any way of controlling Volume Balance on the SB3. I seem to
> recall in the early days of Squeezebox you could control it via the
> remote.
> The reason I am asking is that I just hooked up a D Class amp to a SB3
> and it does not appear to have any balance controls.
Is there any way of controlling Volume Balance on the SB3. I seem to
recall in the early days of Squeezebox you could control it via the
remote.
The reason I am asking is that I just hooked up a D Class amp to a SB3
and it does not appear to have any balance controls.
I am using Linux Mint 18.3 an