kalittle wrote:
>
> card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
> card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835
> IEC958/HDMI]
>
> I don't see HDMI listed here
>
:confused:
kalittle wrote:
>
> Not sure how to proceed with Roland0's suggestion. In his c
Thanks Greg for the suggestions - backup saved my changes so I don't
have to re-create them each time - Thanks!
Found the sound config -
[ INFO ] PLAYBACK hardware Devices
List of PLAYBACK Hardware Devices
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices:
kalittle wrote:
> Still chasing the rabbit - thanks to both Greg and Roland0 for their
> assistance.
>
> Greg - good advice - will dig into the PiCore documentation to
> understand persistance, and how to get a change to survive a reboot.
BTW: The backup command on the web GUI will save /etc/
Still chasing the rabbit - thanks to both Greg and Roland0 for their
assistance.
Greg - good advice - will dig into the PiCore documentation to
understand persistance, and how to get a change to survive a reboot.
Roland0 - question around your comment at the start of your code -
(note: adjust
kalittle wrote:
> Greetings everyone - just built piCorePlayer 3.1 on pi 3 board as my
> Duet reciever died a horrible death. On my Duet, I could send the
> output to both analog and optical outputs - I sent one to my receiver
> and one to my whole house sound system. I would like to send the o
kalittle wrote:
> Ok - that plan did not work - the HDMI option appears to be buried in
> the config file. So here's where I'm at trying to start a second
> instance.
>
> I've modified the player to output to the HDMI, restarted the server so
> it's playing on HDMI. Then I copied /usr/local/
kalittle wrote:
> So, based on Greg's suggestion, I've done a little looking, and I need
> to add something such as this:
>
> sudo /mnt/mmcblk0p2/tce/squeezelite-armv6hf -n "HDMI-Sound" -o
> stereosurround -a 80:::0: -m ab:cd:ef:12:34:05 -C 1 -G 7:L -z
>
> As per my readings, this command shoul
Ok - that plan did not work - the HDMI option appears to be buried in
the config file. So here's where I'm at trying to start a second
instance.
I've modified the player to output to the HDMI, restarted the server so
it's playing on HDMI. Then I copied /usr/local/sbin/config.cfg to
HDMIconfig
So, based on Greg's suggestion, I've done a little looking, and I need
to add something such as this:
sudo /mnt/mmcblk0p2/tce/squeezelite-armv6hf -n "HDMI-Sound" -o
stereosurround -a 80:::0: -m ab:cd:ef:12:34:05 -C 1 -G 7:L -z
As per my readings, this command should be placed in add the command
kalittle wrote:
> Greetings everyone - just built piCorePlayer 3.1 on pi 3 board as my
> Duet reciever died a horrible death. On my Duet, I could send the
> output to both analog and optical outputs - I sent one to my receiver
> and one to my whole house sound system. I would like to send the o
Greetings everyone - just built piCorePlayer 3.1 on pi 3 board as my
Duet reciever died a horrible death. On my Duet, I could send the
output to both analog and optical outputs - I sent one to my receiver
and one to my whole house sound system. I would like to send the output
from piCorePlayer t
11 matches
Mail list logo
