Re: Continues Job

[Sreejith Variyath]

Thanks Karl.

On Tue, Nov 26, 2019 at 1:39 PM Karl Wright  wrote:

> No, just changing the job characteristics will NOT cause the incremental
> behavior to be erased.
>
> Karl
>
>
> On Mon, Nov 25, 2019 at 10:20 PM Sreejith Variyath <
> sreejith.variy...@tarams.com> wrote:
>
>> Yes. I understood. Thanks Karl.
>>
>> I have another question. If I update job type from  TYPE_SPECIFIED  to
>> TYPE_CONTINUOUS , Then the document versioning will reset and job will
>> pick all the documents again?.
>>
>> On Tue, Nov 26, 2019, 05:12 Karl Wright  wrote:
>>
>>> One of the characteristics of continuous jobs is that they call
>>> addSeedDocuments multiple times on a single job run.  The job run never
>>> ends, so this is how the job picks up documents for the infinitely-running
>>> job.  That's just the way it works.  Have you read the book?
>>>
>>> Karl
>>>
>>>
>>> On Mon, Nov 25, 2019 at 5:37 PM SREEJITH va 
>>> wrote:
>>>
 Hi Every One,

 I am trying to setup a job which is having a JDBC repository connector.
 One transformation connector and a custom output connector.

 I want this job needs to run in two mode.

- Sample Mode : This is a sample migration mode. Job will pick 10
documents and migrate to output repository. Then pause the job. I am
planning to pause the job using quartz job depends on the document
processing and document in queue count. This sample run can do "n" 
 times.
- Actual Mode : This is the actual migration mode. In this mode,
The same job needs to runs continuously. The remaining documents after 
 the
sample migration and also any new documents should pick and migrate.

 Could any one please help me on what schedule settings I should follow
 for this kind of job.  Currently I tried with following settings


   jobDescription.setStartMethod(IJobDescription.START_DISABLE);
 jobDescription.setType(IJobDescription.TYPE_CONTINUOUS);
 jobDescription.setInterval(30l);
 jobDescription.setReseedInterval(12l);

 Also I have idNodeQuery set to pick 10 documents  (in sample mode) in
 the JDBC repo connector. But during the job startup in sample mode,
 The addSeedDocuments(...) API getting invoked twice and it causing to
 process more than 10 documents. I do have version query. And the documents
 are not processing in subsequent runs unless there is a version change.

 Really appreciate if some one can help me on these two queries.





 --
 Regards
 -Sreejith

>>>
>> www.tarams.com
>> =
>> DISCLAIMER: The information in this message is confidential and may be
>> legally privileged. It is intended solely for the addressee. Access to this
>> message by anyone else is unauthorized. If you are not the intended
>> recipient, any disclosure, copying, or distribution of the message, or any
>> action or omission taken by you in reliance on it, is prohibited and may be
>> unlawful. Please immediately contact the sender if you have received this
>> message in error. Further, this e-mail may contain viruses and all
>> reasonable precaution to minimize the risk arising there from is taken by
>> Tarams. Tarams is not liable for any damage sustained by you as a result of
>> any virus in this e-mail. All applicable virus checks should be carried out
>> by you before opening this e-mail or any attachment thereto.
>> Thank you - Tarams Software Technologies Pvt.Ltd.
>> =
>>
>

-- 
Best Regards,


*Sreejith Variyath*
Lead Software Engineer
Tarams Software Technologies Pvt. Ltd.
Venus Buildings, 2nd Floor 1/2,3rd Main,
Kalyanamantapa Road Jakasandra, 1st Block Kormangala
Bangalore - 560034
Tarams 

-- 
www.tarams.com     
=

DISCLAIMER:
 The information in this message is confidential and may be 
legally 
privileged. It is intended solely for the addressee. Access to 
this 
message by anyone else is unauthorized. If you are not the intended 

recipient, any disclosure, copying, or distribution of the message, or 
any 
action or omission taken by you in reliance on it, is prohibited and
 may 
be unlawful. Please immediately contact the sender if you have 
received 
this message in error. Further, this e-mail may contain viruses
 and all 
reasonable precaution to minimize the risk arising there from 
is taken by 
Tarams. Tarams is not liable for any damage sustained by you
 as a result 
of any virus in this e-mail. All applicable virus checks 
should be carried 
out by you before opening this e-mail or any 
attachment thereto.
Thank you 
- Tarams Software Technologies Pvt.Ltd.
=

Re: Continues Job

[Karl Wright]

No, just changing the job characteristics will NOT cause the incremental
behavior to be erased.

Karl


On Mon, Nov 25, 2019 at 10:20 PM Sreejith Variyath <
sreejith.variy...@tarams.com> wrote:

> Yes. I understood. Thanks Karl.
>
> I have another question. If I update job type from  TYPE_SPECIFIED  to
> TYPE_CONTINUOUS , Then the document versioning will reset and job will
> pick all the documents again?.
>
> On Tue, Nov 26, 2019, 05:12 Karl Wright  wrote:
>
>> One of the characteristics of continuous jobs is that they call
>> addSeedDocuments multiple times on a single job run.  The job run never
>> ends, so this is how the job picks up documents for the infinitely-running
>> job.  That's just the way it works.  Have you read the book?
>>
>> Karl
>>
>>
>> On Mon, Nov 25, 2019 at 5:37 PM SREEJITH va 
>> wrote:
>>
>>> Hi Every One,
>>>
>>> I am trying to setup a job which is having a JDBC repository connector.
>>> One transformation connector and a custom output connector.
>>>
>>> I want this job needs to run in two mode.
>>>
>>>- Sample Mode : This is a sample migration mode. Job will pick 10
>>>documents and migrate to output repository. Then pause the job. I am
>>>planning to pause the job using quartz job depends on the document
>>>processing and document in queue count. This sample run can do "n" times.
>>>- Actual Mode : This is the actual migration mode. In this mode, The
>>>same job needs to runs continuously. The remaining documents after the
>>>sample migration and also any new documents should pick and migrate.
>>>
>>> Could any one please help me on what schedule settings I should follow
>>> for this kind of job.  Currently I tried with following settings
>>>
>>> jobDescription.setStartMethod(IJobDescription.START_DISABLE);
>>> jobDescription.setType(IJobDescription.TYPE_CONTINUOUS);
>>> jobDescription.setInterval(30l);
>>> jobDescription.setReseedInterval(12l);
>>>
>>> Also I have idNodeQuery set to pick 10 documents  (in sample mode) in
>>> the JDBC repo connector. But during the job startup in sample mode,
>>> The addSeedDocuments(...) API getting invoked twice and it causing to
>>> process more than 10 documents. I do have version query. And the documents
>>> are not processing in subsequent runs unless there is a version change.
>>>
>>> Really appreciate if some one can help me on these two queries.
>>>
>>>
>>>
>>>
>>>
>>> --
>>> Regards
>>> -Sreejith
>>>
>>
> www.tarams.com
> =
> DISCLAIMER: The information in this message is confidential and may be
> legally privileged. It is intended solely for the addressee. Access to this
> message by anyone else is unauthorized. If you are not the intended
> recipient, any disclosure, copying, or distribution of the message, or any
> action or omission taken by you in reliance on it, is prohibited and may be
> unlawful. Please immediately contact the sender if you have received this
> message in error. Further, this e-mail may contain viruses and all
> reasonable precaution to minimize the risk arising there from is taken by
> Tarams. Tarams is not liable for any damage sustained by you as a result of
> any virus in this e-mail. All applicable virus checks should be carried out
> by you before opening this e-mail or any attachment thereto.
> Thank you - Tarams Software Technologies Pvt.Ltd.
> =
>