你主存储容量如果不够了,当然建不了虚拟机了
而且CS是预分配磁盘,虽然实际使用的时候是精简化模式,但是在CS角度,你创建的时候分配多大就是占多大
在 2013年11月4日下午3:43,huangjq huan...@srt.com.cn写道:
这个我知道
主存储
55.86 GB / 98.43 GB
辅助存储
32.09 GB / 49.22 GB
这边我是新建过了,但是我新建几个虚拟机后。本身主存储已经达到55.86g。。再往下达到100%
不是不能用了吗?这个难不成和NFS服务器的硬盘大小有关系吗?
发件人:ma y
可以试试改全局设置里的storage.overprovisioning.factor
在 2013年11月4日上午3:34,huangjq huan...@srt.com.cn写道:
Hi,大家好!
我想请假一个问题
PrimaryStorage存储容量如何扩大问题
默认只有100G.请假如何增加容量?
谢谢,Richard
2013/11/4 tanthalas tanthalas...@hotmail.com
XenServer集群数量,最佳实践的建议数量不一定是你环境中的适合数量,建议你自己测试。
我遇见的环境,可以达到12台左右的集群,没有超过16台。
刘宇超 Richard Liu
发件人: sunko2014
发送时间: 2013-11-04 11:15:39
收件人: users-cn
抄送:
主题: CloudStack4.1+XS,请问XS集群最多容纳几台host?
hello:
cs当前是不是还不能提供某个虚拟机或物理服务器的cpu,内存,io的历史性能曲线。
2013-11-05
陈珂
Did you create service offering using the RBD storage tag.
While adding RBD as primary storage provide storage tag as RBD and create
new service offering with this storage tag . Then use this service offering to
create a instance.
Regards
sadhu
-Original Message-
From: 卢惠勇
Hello, I have a Cloudstack 4.2 running with KMV hypervisors, I want to make
the virtual router HA, any suggestion on how to accomplish HA on a virtual
router?
Thanks,
Hi Motty,
All you need to do is create a new Network Offering with the same settings as
the 'DefaultIsolatedNetworkOfferingWithSourceNatService', but also enable the
'Redundant Router Capability. This will then give you a pair of Virtual
Routers using VRRP for HA.
Regards
Geoff Higginbottom
Thank you very much Geoff,
I was able to create a HA virtual router,
Thanks,
On Mon, Nov 4, 2013 at 8:42 AM, Geoff Higginbottom
geoff.higginbot...@shapeblue.com wrote:
Hi Motty,
All you need to do is create a new Network Offering with the same settings
as the
Mario Giammarco mgiammarco@... writes:
I choose basic networking type.
I have a network 10.1.0.0/24 with dns/gw 10.1.0.1. I have dhcp from
10.1.0.100-10.1.0.200 (I can change the range).
I have one manager/host server at ip 10.1.0.13.
I have followed the installation wizard and I used
Hi Mario,
What is the IP address of the machine you are using to access your VMs?
Does the gateway of 10.1.1.1 exist as a physical device?
Marty
On Mon, Nov 4, 2013 at 7:57 PM, Mario Giammarco mgiamma...@gmail.comwrote:
Mario Giammarco mgiammarco@... writes:
I choose basic networking
Marty Sweet msweet.dev@... writes:
Hi Mario,
What is the IP address of the machine you are using to access your VMs?
Does the gateway of 10.1.1.1 exist as a physical device?
Until two minutes ago I had no physical device with 10.1.1.1.
Now I added a real device 10.1.1.1. But I cannot
Ok, is that IP a gateway? It would need to be able to route traffic.
If you haven't specified VLANS then VLANS will not be used (as far as I'm
aware), and it will just use the interfaces of your server. Example:
bridging eth0 for VM traffic
Marty
On Monday, November 4, 2013, Mario Giammarco
Hi Daan,
There is no trace of CS communicating with either of my XS hosts in the
SMLog file or the xensource.log files when I try to start one of my stopped
instances.
thanks,
Carlos
On Sat, Nov 2, 2013 at 4:50 AM, Daan Hoogland daan.hoogl...@gmail.comwrote:
H Carlos,
I wouldn't know about
yes,i have done it.i followed the instruction from
http://ceph.com/docs/master/rbd/rbd-cloudstack/;
i think this is the major error:
Resource [StoragePool:12] is unreachable: Unable to create
Vol[19|vm=16|ROOT]:com.cloud.utils.exception.CloudRuntimeException: Failed
to copy
Hi Geoff,
Will CS launch two vrouter in one pod? I know CS defaultly provides HA for
vrouter, which enable CS auto-launch another vrouter when the previous one
is broken?
Any difference between the two configurations?
Thanks
Jerry
-邮件原件-
发件人: Geoff Higginbottom
cephx must be enabled,now it work !
thanks
2013/11/4 Suresh Sadhu suresh.sa...@citrix.com
Did you create service offering using the RBD storage tag.
While adding RBD as primary storage provide storage tag as RBD and
create new service offering with this storage tag . Then use this service
Respected Sir
I'm using CloudStack-oss-3.0.2-1-rhel6.2 i'm getting
error in the template uploading and instance creation please help me out.
i'm waiting for your kind acknowledgement.
Yours Sincerely
B. Santhosh
Can you make sure to file a bug with the Ceph folks so the
documentation is updated to be more clear?
--David
On Tue, Nov 5, 2013 at 12:19 AM, 卢惠勇 luhuiy...@conew.com wrote:
cephx must be enabled,now it work !
thanks
2013/11/4 Suresh Sadhu suresh.sa...@citrix.com
Did you create service
Marty Sweet msweet.dev@... writes:
Ok, is that IP a gateway? It would need to be able to route traffic.
If you haven't specified VLANS then VLANS will not be used (as far as I'm
aware), and it will just use the interfaces of your server. Example:
bridging eth0 for VM traffic
First I
19 matches
Mail list logo