Dear ALL,
Previously I used to have cloudstack, it was running properly, created the
instances successfully also. I destroyed the prevoius installation of
cloudstack. not removed any of the files of previous
cloudstack(/export/secondary, /export/primary) . I just wiped the database
"drop databas
Exactly , it will you tell the reason for the failure if you check above
the error message and there are so many reasons for the same error message "
insufficient server capacity exception".
Also grep for job -15 and provide all the job-15 details.
Regards
sadhu
-Original Message-
Can you share your management server logs .
-Original Message-
From: sandeep khandekar [mailto:cloudstack.sand...@gmail.com]
Sent: Friday, July 25, 2014 11:23 AM
To: users@cloudstack.apache.org
Subject: Unable to create a deployment for VM[User|
Dear ALL,
Got this error while creating an
Sandeep,
Check above these log statements to find out the reason for "insufficient
server capacity exception"
You can paste those log statements
Thanks
Rajesh Battala
-Original Message-
From: sandeep khandekar [mailto:cloudstack.sand...@gmail.com]
Sent: Friday, July 25, 2014 11:45 AM
root@cloudstack:/home/cloudstack# tail -f
/var/log/cloudstack/management/management-server.log|grep exception
com.cloud.exception.InsufficientServerCapacityException: Unable to create a
deployment for VM[DomainRouter|r-4-VM]Scope=interface
com.cloud.dc.DataCenter; id=1
2014-07-25 11:43:45,754 INFO
Dear Sandeep,
Please cut and paste the error/exception content from the logs. without logs
it difficult to analyse the problem.
Regards
Sadhu
-Original Message-
From: sandeep khandekar [mailto:cloudstack.sand...@gmail.com]
Sent: 25 July 2014 10:31
To: users@cloudstack.apache.org
Subj
Not sure if it is related but I see 2 entries in the mshost for my same server
but with different msid. Both show as ‘Up’. In reading the table comments it
seems the msid is based on the MAC. I am guessing this may be due to using a
bond and that it may be have selected a different NIC to get
Dear ALL,
Got this error while creating an instance.
how to solve these?
Thank you
--
SANDEEP KHANDEKAR
Assistant Professor
Department of Computer science and engineering
Sreenidhi Institute of science and Technology
Hyderabad
host is up and running
On Fri, Jul 25, 2014 at 10:29 AM, sandeep khandekar <
cloudstack.sand...@gmail.com> wrote:
> I am working on single node.
>
>
> On Fri, Jul 25, 2014 at 9:42 AM, Suresh Sadhu
> wrote:
>
>> Sandeep,
>>
>> Please provide error log(MSlog) content .
>>
>>
>> It seems your host
I am working on single node.
On Fri, Jul 25, 2014 at 9:42 AM, Suresh Sadhu
wrote:
> Sandeep,
>
> Please provide error log(MSlog) content .
>
>
> It seems your host is not up. Check your host state.
>
>
> Regards
> sadhu
>
>
> -Original Message-
> From: sandeep khandekar [mailto:cloudst
Sandeep,
Please provide error log(MSlog) content .
It seems your host is not up. Check your host state.
Regards
sadhu
-Original Message-
From: sandeep khandekar [mailto:cloudstack.sand...@gmail.com]
Sent: 25 July 2014 09:37
To: users@cloudstack.apache.org
Subject: Error while deplo
Dear Cloudstackers,
I downloaded ubunut.iso, I deployed it, the following error I got.
Failed to deploy Vm with Id: 3, on Host with Id: null
2014-07-25 09:34:38,575 INFO [cloud.ha.HighAvailabilityManagerImpl]
(HA-2:null) checking health of usage server
2014-07-25 09:34:38,577 DEBUG [cloud.ha.Hi
Oh, you meant the consoleproxy.url.domain. After setting it to blank, it
looks similar, though it shows 192.168.0.131 instead of 192-168-0-131.
And as for restarting the cvpm, the cpvm automatically started after I
stopped it. I've included the logs. There are 3 warnings, but no exceptions.
CPVM pu
Tomasz - This fix works but you should rather make the fix on the MS code
which sends the deletion command rather than on the systemvm side.
Moreover if you stop/start ssvm you would loose this jar. You have to
rebuild systemvm.iso and put it back on the host (depends on hypervisor in
use). My sug
Here's the less verbose version: My hypervisor has two NICs and I've set
up a label on each. Traffic to and from cloudbr0 works perfectly. Traffic
going into cloudbr1 goes out cloudbr0 because that interface has a default
gateway. Will this pose a problem when I try to set up separate managemen
Hi All,
Had to move one of my clusters to a new subnet but it is not working (e.g.
192.168.1.0/24 to 10.100.1.0/24). These are the steps I took:
Environment: CS 4.1.1 on Ubuntu 12.04, XenServer 6.1, Shared NFS SR.
1) stopped all instances using cloudstack UI
2) stop cloudstack-management servic
I am trying to set up a server with two NICs as a hypervisor. I would like
to use the two interfaces to separate management and guest traffic, as
recommended by the CloudStack installation guide. This server is connected
to a managed switch, which is connected to a hardware firewall, both of
whic
Hi everybody
i'm usign CS 4.3 on KVM and CEPH
So, according to the bug
https://issues.apache.org/jira/browse/CLOUDSTACK-4858
the setting snapshot.backup.rightafter doesn't work, making it
impossible to use the snapshot feature, because it takes several tens of
minutes only for copying volume s
John, the official HCL for GPU passthrough is here:
http://hcl.xensource.com/GPUPass-throughDeviceList.aspx.
That being said, the list represents the combination of GPU card and server
which was tested either by Citrix or the vendor and found to work reliably.
Some of the considerations included
Simple question: Anybody using this is integration in production?
What is the UX? Does it require tmp_auth?
Thanks!
--
Francois Gaudreault
Gestionnaire de Produit | Product Manager - Cloud Platform & Services
t:514-629-6775
CloudOps Votre partenaire infonuagique | Cloud Solutions Experts
420 r
Amin, Thanks for the link provided. that howto worked perfect.
Thanks,
On Wed, Jul 23, 2014 at 6:08 PM, Amin Samir wrote:
> Hello,
>
> Follow this link
>
> http://shankerbalan.net/blog/freebsd-10-on-cloudstack-xenserver/
>
> Kind Regards
> Amin
>
> -Original Message-
> From: motty cru
my installation was broken, I had to re-create the zone. First time I
create the zone got an error message complaining about primary storage.
after fixing liable in XenServer, re-create the zone SSVMs worked
properly.
Thanks,
On Wed, Jul 23, 2014 at 11:58 PM, Nitin Mehta
wrote:
> Yes, please
Hi guys,
Can anyone tell me or point me in the direction of a hardware compatabiliy list
of servers that support GPU passthrough with xenserver 6.2?
It seems to be available on Dell R420’s and Dell R620’s, but is missing from
the R210’s and I wondered if there is a definitive list anywhere.
Tha
Hello,
https://github.com/apache/cloudstack/blob/master/services/secondary-storage/server/src/org/apache/cloudstack/storage/template/UploadManagerImpl.java
We analyzed that the problem is in this line:
if (cmd.getType() == Upload.Type.VOLUME) {
This line is always true because cmd.getTy
24 matches
Mail list logo
