Re: Unable to add primary storage (SR_BACKEND_FAILURE_73NFS mount error [opterr=mount failed with return code 32])

Hi Tejas, Have you checked whether mannualy you are able to mount nfs share to xen server or not? If you are using nas box then check the allowed ip and its permissions. Thanks, Tejas On Jan 5, 2015 7:56 PM, Tejas Gadaria refond.g...@gmail.com wrote: Hi, I am facing issue with xenserver

Re: Unable to add primary storage (SR_BACKEND_FAILURE_73NFS mount error [opterr=mount failed with return code 32])

It seems issue with remote mounting ,similar issue seen http://lists.xenproject.org/archives/html/xen-api/2012-05/msg00191.html ,mentioned solution should work in your case also Thanks prashant On 1/6/15, 11:39 AM, Tejas Gadaria refond.g...@gmail.com wrote: Hi Suresh, I was able to mount NFS

Re: Bridging not working properly

Hi Chris, What is the ip range and gateway which you have configured for management traffic in cloudstack PODS. Your cloudstack pod ips will communicate SSVM, etc., Thank You. Gopalakrishnan.S - Original Message - From: Chris ccta...@gmail.com To: users@cloudstack.apache.org

External use of a single IP / blacklist IP

Hi, we're running ACS 4.4 w/ advanced networking. I'ld like to use one single IP for an ACS unrelated host. What would be the best way of telling ACS to not provision that particular IP? Thanks for any hints! - Stephan

Bridging not working properly

Hi, I'm having issues getting the internal network to work propperly. This are my interfaces (hyp1): IP address for bond0:172.16.0.101 (management storage) IP address for cloudbr0: xxx.xx.61.3 (public) IP address for virbr0: 192.168.122.1 IP address for cloud0: 169.254.0.1 Storage,

Re: External use of a single IP / blacklist IP

1. make sure it is out of range for the particular network type (i.e. define a network 1.2.3.0/24 with start-ip 1.2.3.4 and then use 1.2.3.1-3 for other purposes (gateway, your dns/dhcp etc) 2. or create a vm with that ip and disable it for us (edit /etc/init.d/* to make sure it doesn't claim

Re: How do i enable HA for VM

Use service offering that is HA enabled. -abhi On 05-Jan-2015, at 6:00 pm, Sonali Jadhav son...@servercentralen.se wrote: Hi, I am reading this section https://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.0.2/html/Admin_Guide/ha-enabled-vm.html which says, The user can specify

How do i enable HA for VM

Hi, I am reading this section https://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.0.2/html/Admin_Guide/ha-enabled-vm.html which says, The user can specify a virtual machine as HA-enabled. I wanted to know where I can specify HA enable option for a VM ? Yours sincerely, Sonali

RE: How do i enable HA for VM

Aha! Super thanks. /Sonali -Original Message- From: Abhinandan Prateek [mailto:abhinandan.prat...@shapeblue.com] Sent: Monday, January 5, 2015 6:06 PM To: users@cloudstack.apache.org Subject: Re: How do i enable HA for VM Importance: High Use service offering that is HA enabled.

Unable to add primary storage (SR_BACKEND_FAILURE_73NFS mount error [opterr=mount failed with return code 32])

Hi, I am facing issue with xenserver 6.2 SP1, on ACS 4.3.1 and 4.4 both. While creating Zone with NFS as primary secondary storage 2015-01-05 19:29:45,715 DEBUG [c.c.a.m.DirectAgentAttache] (DirectAgent-2:ctx-23cfb66b) Seq 1-3875347479352311816: Executing request 2015-01-05 19:29:47,079 WARN

Re: External use of a single IP / blacklist IP

Daan, thanks for your quick reply! 1. make sure it is out of range for the particular network type (i.e. define a network 1.2.3.0/24 with start-ip 1.2.3.4 and then use 1.2.3.1-3 for other purposes (gateway, your dns/dhcp etc) Since my particular IP is inside an already provisioned range, I

Re: XenServer Creedence support

I think, the questionmark of the OP got lost in translation :) Am Sonntag, den 04.01.2015, 09:29 +0100 schrieb Erik Weber: Got any docs or howtos on that combo? That's very interesting. Erik Den søndag 4. januar 2015 skrev linux...@gmail.com linux...@gmail.com følgende: cloud ACS

RE: Unable to add primary storage (SR_BACKEND_FAILURE_73NFS mount error [opterr=mount failed with return code 32])

XS is unable to create the SR failing with the following error: --- Caused by: SR_BACKEND_FAILURE_73NFS mount error [opterr=mount failed with return code 32] --- May be a problem with the NFS. Can you try manually creating a SR on XS using this NFS or may be simply try to mount the NFS on XS and

Cancel hung jobs

Hi folks, What would be the best way to cancel jobs that are stuck? I was expecting them to timeout, but for some reasons they are not. Thanks. -- Francois Gaudreault Gestionnaire de Produit | Product Manager - Cloud Platform Services t:514-629-6775 CloudOps Votre partenaire infonuagique |

Re: Cancel hung jobs

Do you see something along the lines of below? please provide the complete error message. (1434,VmWorkJobQueue, 2471) is reaching concurrency limit 1 (1475,VmWorkJobQueue, 2483) is reaching concurrency limit 1 (1477,VmWorkJobQueue, 2484) is reaching concurrency limit 1 (1478,VmWorkJobQueue,

Re: Cancel hung jobs

Francois, you can change timeout default settings in global settings, if you have not done so. Thanks, Motty On 01/05/2015 02:09 PM, Francois Gaudreault wrote: Yes. And also tons of job in the async_job table with status 0. FG On 2015-01-05 4:54 PM, ilya musayev wrote: Do you see something

Re: Cancel hung jobs

These are 60min and 1440min for standard jobs and 600sec for vm related jobs right? I have tasks that are from dec 27 still in there and these are vm jobs. FG On Jan 5, 2015 5:25 PM, Motty Cruz motty.c...@gmail.com wrote: Francois, you can change timeout default settings in global

Re: Cancel hung jobs

Yes. And also tons of job in the async_job table with status 0. FG On 2015-01-05 4:54 PM, ilya musayev wrote: Do you see something along the lines of below? please provide the complete error message. (1434,VmWorkJobQueue, 2471) is reaching concurrency limit 1 (1475,VmWorkJobQueue, 2483) is

Re: Unable to add primary storage (SR_BACKEND_FAILURE_73NFS mount error [opterr=mount failed with return code 32])

Hi Suresh, I was able to mount NFS on XS host through CLI mount.nfs4 successfully. Also vhd-utils was present on Management server and XS host also. Still facing same issue. Regards, Tejas On Mon, Jan 5, 2015 at 11:16 PM, Suresh Sadhu suresh.sa...@citrix.com wrote: Hope you have already

API error

Hi, I'm not sure if this is related to CS or not. Thanks in advance for all the help and advice. Setup: 4.4.2 on Centos 6.6 64bit External Secondary Storage: NFS Local Primary on identical hosts. API error that we get: Unable to use network with id= 626ee136-933c-4bca-9084-fc0691f2ff81,

RE: Unable to add primary storage (SR_BACKEND_FAILURE_73NFS mount error [opterr=mount failed with return code 32])

Hope you have already copied vhd-util in to the host and also as Somesh suggested try manually mounting the storage directly from the host. Regards Sadhu -Original Message- From: Somesh Naidu [mailto:somesh.na...@citrix.com] Sent: 05 January 2015 20:16 To:

RE: API error

Can we get more details. As a start, what API call are we talking about here and what hypervisor? -Original Message- From: Mohammad Rastgoo [mailto:moham...@synapti.ca] Sent: Monday, January 05, 2015 12:48 PM To: users@cloudstack.apache.org Subject: API error Hi, I'm not sure if this

Re: API error

Thanks for you reply. Hypervisor is KVM. I'm creating a VM. Unfortunately hostbill module is encoded so I cannot see anything at hostbill end. is there any API log in hostbill that I can see/paste the API calls here? Thanks On Mon, Jan 5, 2015 at 12:54 PM, Somesh Naidu somesh.na...@citrix.com

[PROMOTE] CloudStack Silicon Valley User Group Meetup - January 14th, 2015

Hi all, If you’re going to be in the Silicon Valley next week - then join us! The next CloudStack Silicon Valley Meetup has been scheduled for Wednesday, January 14th at SAP Labs in Palo Alto, CA. The CloudStack Silicon Valley User Group kicked off the Beginner's Guide to Apache CloudStack Series

RE: API error

I am sorry, I am not familiar with hostbill but a quick look up on the internet tells me that this is a billing software module that would, I guess, consume raw usage data from ACS (of course via ACS API). So if I understand it correct, you say you are trying to create a VM via a hostbill API

Re: Can't create or deploy VMs

Hi Naidu, in the dashboard, it shows there is used only 38% of Primary Storage: * Zone: ZonePharma 38% Primary Storage 211.44 GB / 543.50 GB So it seems there is more than enough of Primary Storage for creating VMs. *Regards, * *José * Teléf. (593-2)2993100 ext. 1639 Teléf.

Re: API error

Hi, Thanks again. here is the API log: http://pastebin.com/Fdx3mPK2 seems there is communication back and forth between HB and ACS. I appreciate any help with the log please. Thanks On Mon, Jan 5, 2015 at 1:41 PM, Somesh Naidu somesh.na...@citrix.com wrote: I am sorry, I am not familiar

RE: Can't create or deploy VMs

Note quite. Insufficient space on pool: 1 since its usage percentage: 0.9072490225390984 has crossed the pool.storage.capacity.disablethreshold: 0.85 As Prashant pointed out, the used threshold for this storage has been reached. What you are seeing on the dashboard is allocated percentage.

RE: API error

Share the output of the following SQL query/s: select * from account where account_name='client_1_1'\G select * from networks where uuid='626ee136-933c-4bca-9084-fc0691f2ff81'\G -Original Message- From: Mohammad Rastgoo [mailto:moham...@synapti.ca] Sent: Monday, January 05, 2015 1:53 PM

Re: API error

mysql select * from account where account_name='client_1_1'\G *** 1. row *** id: 4 account_name: client_1_1 uuid: 7124a5a9-eb18-42b8-818e-f64a248d7194 type: 0 domain_id: 3 state: enabled

RE: API error

Ok, all the accounts with account_name client_1_1 seem to be removed. So not sure using which account you are trying to launch the VM? -Original Message- From: Mohammad Rastgoo [mailto:moham...@synapti.ca] Sent: Monday, January 05, 2015 2:16 PM To: users@cloudstack.apache.org Subject:

Re: How do i enable HA for VM

Hello, You have to create a special service offering with ha enabled. Regards, Le 05/01/2015 13:30, Sonali Jadhav a écrit : Hi, I am reading this section https://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.0.2/html/Admin_Guide/ha-enabled-vm.html which says, The user can specify a

RE: XenServer Creedence support

This is what I expected but I was hoping to move along on to the 6.5 release. I'm still holding out going into production with 4.4 and 6.2 -Original Message- From: Stephan Seitz [mailto:s.se...@secretresearchfacility.com] Sent: Monday, January 05, 2015 9:43 AM To: