Yes, you can run agent as Administrator account.
All the permission required are listed in preparation checklist for Hyper-V
which I have sent earlier. For more details on permission requirements you can
refer Hyper-V documentation(microsoft documentation).
You can verify whether you have all
No. I have not build it recently.
Anyways it is using the same executable which you are using so it will not make
difference.
You can build it for yourself by following the steps which I have mentioned
earlier.
Previously you did not install WiX that’s why it was failing.
Regards,
Anshul
You are using advanced zone without security group right?
Have you tried disabling and enabling zone?
Regards,
Anshul
On 27-Feb-2015, at 11:33 am, Partha Goswami
par...@tulisoft.co.inmailto:par...@tulisoft.co.in wrote:
I have checked all permission, everything is well, I have logged in
I have checked all permission, everything is well, I have logged in with
same user account of agent installed and I can create VM from HyperV
manager. But not using cloudstack
On Fri, Feb 27, 2015 at 10:48 AM, Anshul Gangwar anshul.gang...@citrix.com
wrote:
No. I have not build it recently.
I am reinstalling cloudstack and trying again
On Fri, Feb 27, 2015 at 11:53 AM, Anshul Gangwar anshul.gang...@citrix.com
wrote:
You are using advanced zone without security group right?
Have you tried disabling and enabling zone?
Regards,
Anshul
On 27-Feb-2015, at 11:33 am, Partha
Hi Lucian/Geoff,
Yeah, I had included both users@ and dev@ ML so please reply to dev@ or both to
get it on dev@ :)
On 26-Feb-2015, at 9:11 pm, Nux! n...@li.nux.ro wrote:
+1 from me, as well.
PS: shouldn't this also go to dev@ ?
--
Sent from the Delta quadrant using Borg technology!
the big question now is it support HyperV 2012 R2 right? Not only
HyperV2012 right?
On Fri, Feb 27, 2015 at 12:23 PM, Partha Goswami par...@tulisoft.co.in
wrote:
I am reinstalling cloudstack and trying again
On Fri, Feb 27, 2015 at 11:53 AM, Anshul Gangwar
anshul.gang...@citrix.com wrote:
Hi somesh,
I am able to deploy vm's when the template is in primary storage.i have
manually removed the template from xencenter primary storage, vm 's are not
creating at that moment.but the template is still in secondary storage.
how to create vm's when the template is removed from primary
Didnt folow the thread previously, so sorry if suggestion is useless...
On 26 February 2015 at 15:00, Andrija Panic andrija.pa...@gmail.com wrote:
I guess, you could dig into database, find some volume of the VM that is
already running, use qemu-img info or similar (not sure what, since you
Hi guys,
I'm planing a new scenario with cloudstack and I want to know what version
is indicated to use before upgrade to version 4.5, is 4.3 better than 4.4?
Thanks
Nikolas Wostor
2015-02-26 12:43 GMT-03:00 Nux! n...@li.nux.ro:
Hello Sonali,
It's not long now, I think one more RC and
Hello Sonali,
It's not long now, I think one more RC and it's good. Don't take my word for
it, but I'd expect it in 2-3 weeks.
HTH
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From: Sonali Jadhav son...@servercentralen.se
To:
Running CloudStack 4.3.2 with advanced networking using Open vSwitch on
KVM. I am having an issue where my virtual router is coming up with 2
public interfaces when there should only be 1. CloudStack is only
requesting the 3 interfaces (private, control, and public) but the VM is
coming up with 4.
Hi
I tried to deploy and test CloudStack 4.5 Management (using deb packages
from shapeblue) on Debian 8 (which is not yet released) and went into a
broken dependency
https://github.com/apache/cloudstack/blob/master/debian/control#L18 of
tomcat6
tomcat6 is not packed into Debian 8. I am wondering
+1
Have been using on a daily basis for a number of weeks using both command line
and heavily in many different scripts.
Regards
Geoff Higginbottom
D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
geoff.higginbot...@shapeblue.com
-Original Message-
From: Rohit Yadav
Thanks Martin, No guarantees I get around it but I'll keep an eye on it.
On Thu, Feb 26, 2015 at 1:52 PM, Martin Emrich
martin.emr...@empolis.com wrote:
Hi!
I just created this issue:
https://issues.apache.org/jira/browse/CLOUDSTACK-8288
Thanks
Martin
-Ursprüngliche Nachricht-
Hi!
I just created this issue: https://issues.apache.org/jira/browse/CLOUDSTACK-8288
Thanks
Martin
-Ursprüngliche Nachricht-
Von: Daan Hoogland [mailto:daan.hoogl...@gmail.com]
Gesendet: Donnerstag, 26. Februar 2015 13:44
An: users@cloudstack.apache.org
Betreff: Re: Deleting Instance
I guess, you could dig into database, find some volume of the VM that is
already running, use qemu-img info or similar (not sure what, since you are
on Xen) to inspect that Volume, to find what is the BASE disk, and try to
manually recreate that BASE disk from the Template from the Secondary
Hi Prashant,
I have reported both bugs
https://issues.apache.org/jira/browse/CLOUDSTACK-8283
https://issues.apache.org/jira/browse/CLOUDSTACK-8284
But I observed that my bug id 8283, has already been reported in april-2013
for 4.2.0 https://issues.apache.org/jira/browse/CLOUDSTACK-1966 ,and
Looks like ACS first choose in which cluster should deploy instance and
after that choose prefered host.
On 02/26/2015 12:57 PM, Mārtiņš Jakubovičs wrote:
Hello,
I try to achieve configuration, where I got two clusters, and I want
to use one for windows machines and other for linux machines.
Hi All,
Usage records are till not generating.Is there any possibility to
re-install the usage server?
If possible what is the procedure.
will it affects the management server?
Regards,
Rajasekhar.
On Thu, Feb 19, 2015 at 12:46 PM, Rohit Yadav rohit.ya...@shapeblue.com
wrote:
Try to set the
Hi,
When CloudStack 4.5 release is coming?
Yours sincerely,
Sonali Jadhav | Cloud Administrator
Nordiska Servercentralen
Skype ID: sonali.jadhav.sj
E-mail: son...@servercentralen.semailto:son...@servercentralen.se
Nordiska Servercentralen AB
Snövitsvägen 5
S-167 62 Bromma | Sweden
H everybody,
I will be in Taiwan the first week of april and am wondering if the
CloudStack community is very active there. Anyone knows?
thanks,
--
Daan
Feature-wise 4.4 is the latest Cloudstack version, that's what I'd use, ymmv.
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From: Nikolas Wostor nwos...@gmail.com
To: users@cloudstack.apache.org
Sent: Thursday, 26 February, 2015
Ok, but 4.4 is stable comparing to 4.3?
2015-02-26 14:30 GMT-03:00 Nux! n...@li.nux.ro:
Feature-wise 4.4 is the latest Cloudstack version, that's what I'd use,
ymmv.
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From:
They are both pretty stable.
4.3 has had a bit more thorough session of bug fixing, but lacks root resize
feature (but that only works in KVM, so if you use other HV it won't matter).
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
Strange, I haven't seen that happen before.
Is this happening with all routers in the environment or only a specific one?
If latter we might just try recreating it. If former, then probably have to
look at /var/log/messages on the router.
Somesh
CloudPlatform Escalations
Citrix Systems, Inc.
Did you check the entries in the nics table for that router? That might give
you some pointers.
Somesh
CloudPlatform Escalations
Citrix Systems, Inc.
-Original Message-
From: John Skinner [mailto:john.skin...@appcore.com]
Sent: Thursday, February 26, 2015 10:59 AM
To:
Yeah. As far as CloudStack is concerned, it has 3 NICs - the UI and the
database confirms. The API call also only calls for 3 NICs. How this 4th
NIC is getting created is a mystery. It has the same IP as the 3rd NIC, it
doesn't make any sense.
On Thu, Feb 26, 2015 at 2:16 PM, Somesh Naidu
Wonderful! Guess the HA task eventually hit the retry attempt and ended in
Error state.
Regards,
Somesh
-Original Message-
From: Martin Emrich [mailto:martin.emr...@empolis.com]
Sent: Thursday, February 26, 2015 5:44 AM
To: users@cloudstack.apache.org
Subject: AW: Encountered
This happens with all routers in that specific zone, the other zone is ok.
Messages and cloudstack logs on the router do not offer any insight. You
can see the results of ipassoc.sh in messages and that it is clearly
setting up postrouting rules for eth3 which should not exist. CloudStack
agent
Thx Lucian,
that was my guessing, but would like some confirmation if anyone familiar
with this...
Thanks
On 25 February 2015 at 17:57, Nux! n...@li.nux.ro wrote:
Not a CEPH user, but what I believe happens is your HV mounts the NFS
storage and then does something like qemu-img convert to
What are logs on Hyper-V agent saying? You can find them in event viewer of
Hyper-V host. Post after exporting them to some file.
Regards,
Anshul
On 26-Feb-2015, at 2:14 pm, Partha Goswami
par...@tulisoft.co.inmailto:par...@tulisoft.co.in wrote:
Yes thanks, Now its create system vms
WHen
Andrija,
I think this is one of those cases where we can verify it empirically. :-)
Start a volume upload and keep an eye on ps, top, iotop, df/mount etc
on the hypervisors.
HTH
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original Message -
From:
The volume is downloaded by the SSVM into secondary storage under the
volumes directory. It will sit there until you choose to attach it
somewhere, at which point a CopyCommand will be sent to a hypervisor
that has access to the primary storage for the cluster on which the
target VM is running to
Now you see, that is 5 star answer :)
Thank you very much Marcus
@Nux, will confirm what Marcus said, as you proposed with top and ther
stuff - I just wanted confirmation/info, that I got from Marcus.
On 26 February 2015 at 10:26, Marcus shadow...@gmail.com wrote:
The volume is downloaded by
It seems you have not provided the right permissions on cifs share.
Have you checked preparation checklist for Hyper-V at
http://cloudstack-installation.readthedocs.org/en/latest/hypervisor/hyperv.html?
Regards,
Anshul
On 26-Feb-2015, at 3:36 pm, Partha Goswami
Hi!
I am running ACS 4.4.2 with XenServer 6.2.
I destroyed two instances which I no longer needed. Next I wanted to revert two
other instances to a snapshot, but I just saw them in state Expunging, then
they were gone.
Thus deleting completely unrelated VMs destroyed snapshots I wanted to
Please find attach file
On Thu, Feb 26, 2015 at 2:46 PM, Anshul Gangwar anshul.gang...@citrix.com
wrote:
What are logs on Hyper-V agent saying? You can find them in event viewer
of Hyper-V host. Post after exporting them to some file.
Regards,
Anshul
On 26-Feb-2015, at 2:14 pm, Partha
Ok I am checking
-Original Message-
From: Anshul Gangwar [mailto:anshul.gang...@citrix.com]
Sent: Thursday, February 26, 2015 3:59 PM
To: users@cloudstack.apache.org
Subject: Re: HyperV help
It seems you have not provided the right permissions on cifs share.
Have you checked
Hmm, without doing anything, the messages stopped by themselves ;)
Thanks
Martin
-Ursprüngliche Nachricht-
Von: Somesh Naidu [mailto:somesh.na...@citrix.com]
Gesendet: Dienstag, 17. Februar 2015 17:16
An: users@cloudstack.apache.org
Betreff: RE: Encountered unhandled exception during
Hi All,
CloudMonkey master branch has been rather stable since last two months.
It has been already tested by many since the last three 5.3.1 RC
candidates. Please take some time to do basic tests and vote for a
speedy release. Thanks.
I've created a 5.3.1 release candidate of CloudMonkey, with
Hi,
I just had client upload 200GB volume/template, and tried to deploy new VM
from it.
GUI timeout after ~ 30min - saying VM is now in Error state, but for some
time after th VM error out, I coul see ROOT-xxx volume being created on
CEPH - and timestamp updated regularry in volumes table in
As far as I can tell it tries to delete a secondary ip from a nic
instead of a second (or first) nic. This is going to cost me some
diving into. I hope Somesh has a simple answer for you. The initial
error we talked about is in your log between lines 97 and 133. I will
have a look when I find the
Hi Geoff,
so I can try adding some CPU and RAM to router VM. Can I monitor system
VM resources?
Thanks
Il 19/02/2015 16:16, Geoff Higginbottom ha scritto:
HI Ugo,
Unfortunately we still continue to run into this problem on a regular basis.
I've had some success increasing the RAM CPU
What did you get after running
/usr/share/cloudstack-common/scripts/storage/secondary/cloud-install-sys-tmplt \
-m /mnt/secondary \
-u
http://cloudstack.apt-get.eu/systemvm/4.4/systemvm64template-4.4.1-7-hyperv.vhd
\
-h hyperv \
-s optional-management-server-secret-key \
-F
? This basically
Yes thanks, Now its create system vms
WHen i am trying to add it
I am getting
Job failed due to exception Unable to create a deployment for
VM[ConsoleProxy|v-2-VM]
On Thu, Feb 26, 2015 at 1:52 PM, Anshul Gangwar anshul.gang...@citrix.com
wrote:
What did you get after running
Hello Guyz,
We require to install xenserver 6.5 in new servers because of hardware
competibility. We are already using cloudstack 4.3. Does an one have tested
cloudstack 4.3 with xenserver 6.5.
I am really loking for xenserver 6.5 and cloudstack compatibility related
information before
Cloudstack 4.5 has packages for RHEL 7 that are supposed to run with tomcat 7.
On 26-Feb-2015, at 8:55 pm, Rene Moser m...@renemoser.net wrote:
Hi
I tried to deploy and test CloudStack 4.5 Management (using deb packages
from shapeblue) on Debian 8 (which is not yet released) and went into
+1
I have been using cloud monkey to bootstrap a cloud with advance zone.
-abhi
On 26-Feb-2015, at 9:11 pm, Nux! n...@li.nux.ro wrote:
+1 from me, as well.
PS: shouldn't this also go to dev@ ?
--
Sent from the Delta quadrant using Borg technology!
Nux!
www.nux.ro
- Original
So till now System VMs are not up?
Try disabling and renabling zone.
Regards,
Anshul
On 27-Feb-2015, at 9:44 am, Partha Goswami
par...@tulisoft.co.inmailto:par...@tulisoft.co.in wrote:
Hello Anshul,
Now i am getting following error after I fixed AD issue
2015-02-26 20:08:25,249 [7] ERROR
And also post Hyper-V Agent logs.
On 27-Feb-2015, at 10:06 am, Anshul Gangwar
anshul.gang...@citrix.commailto:anshul.gang...@citrix.com wrote:
So till now System VMs are not up?
Try disabling and renabling zone.
Regards,
Anshul
On 27-Feb-2015, at 9:44 am, Partha Goswami
-- Forwarded message --
From: Sebastien Goasguen run...@gmail.com
Date: 2015-02-03 16:42 GMT+08:00
Subject: Fwd: Google Summer of Code 2015 is coming
To: d...@cloudstack.apache.org d...@cloudstack.apache.org
GSoC 2015 is back.
Time to enter your project proposals in jira if you
As previously pointed out, Can you please send VR start command,
/var/cache/cloud/cmdline file in VR also /var/log/cloud.log.
These logs helps us to understand where the problem is.
Thanks,
Jayapal
On 27-Feb-2015, at 2:54 AM, John Skinner john.skin...@appcore.com wrote:
This happens with all
Hi Sekhar,
In order to reinstall cloudstack usage service, you should remove usage RPM
and then install it again.
Stop cloudstack usage service.
#rpm -qa | grep cloudstack-usage
cloudstack-usage-4.2.1-1.el6.x86_64
#rpm -e cloudstack-usage-4.2.1-1.el6.x86_64
#yum install cloudstack-usage
2015-02-26 20:45:31,597 [3] ERROR HypervResource.HypervResourceController
[a5c64fc5-ec04-46b5-bebf-75f87438df1e] - com.cloud.agent.api.StartCommand
fail on exceptionObject reference not set to an instance of an object.
System.NullReferenceException: Object reference not set to an instance of
an
do you have readymade clickble installer with you?
On Fri, Feb 27, 2015 at 10:17 AM, Partha Goswami par...@tulisoft.co.in
wrote:
2015-02-26 20:45:31,597 [3] ERROR HypervResource.HypervResourceController
[a5c64fc5-ec04-46b5-bebf-75f87438df1e] - com.cloud.agent.api.StartCommand
fail on
Hello Anshul,
Now i am getting following error after I fixed AD issue
2015-02-26 20:08:25,249 [7] ERROR HypervResource.HypervResourceController
[b8d02f78-8c1e-41ed-8f2c-822a24e98402] - com.cloud.agent.api.StartCommand
fail on exceptionObject reference not set to an instance of an object.
57 matches
Mail list logo