Re: Unable to add Ceph KVM node in cloudstack

Hello Shetty, It seems you agent or libvirt configuration is wrong. Please, specify also do you use OVS or Linux bridge? Did you follow this guide? http://cloudstack-installation.readthedocs.org/en/latest/hypervisor/kvm.html Regards, Vadim On 2015-09-08 08:18, Shetty, Pradeep

kvm快照问题

大家好， 我想做数据卷的重现快照。结果发现快照可以创建成功，但快照的状态为error。 测试如下: 1.手动创建快照，创建后的快照状态依然为error。偶尔会成功一次。 2.将数据卷取消附加磁盘，再次手动创建快照，可以成功，状态为BackedUp。 3.job.expire.minutes 为1440.成功创建的话时间在10分钟左右。 agent和management端log都没有发现error。 诸位有何建议？

Re: Cloudmonkey doubt

Ok that works perfectly. Thanks for the help. El 05/09/15 a las 17:07, Remi Bergsma escribió: If you specify projectid=-1 you get all vms from all projects. I usually do two calls, one for all non-projects and another for all project vms. It's not cloudmonkey, it's the api. Sent from my

CCP-4.5.0: Adding additional interfaces are not accepting on VMs if the VM has vm snapshots

Hi All, We are facing issues when adding additional interfaces on VMs if VM has vm snapshots. Issue is VM not accepting to add additional interface due to VM snapshots. Error is: *Add netowrk to VM Action failed - Service Exception : NIC cannot be added to VM with VM Snapshots* I believe that

Re: DHCP NIC instead of STATIC

Hello Cristian, I don't remember exactly which option I have turned on, but some of my networks allow IP configuration upon VM instance startup. Wizard shows extra field for manual IP definition in Network tab. May be more experienced people point what should you use if this is a case

RE: Unable to add Ceph KVM node in cloudstack

Pradeep, From documentation : Warning -- It is NOT recommended to run services on this host not controlled by CloudStack. Good practice -- KVM host must be virgin-clean. Vadim. On 2015-09-08 09:14, Shetty, Pradeep wrote: Hello Vadim, We have followed the same

Re: DHCP NIC instead of STATIC

A dhcp server runs in VR that allocates ip address to VM as per configurations made by management server. > On 07-Sep-2015, at 5:14 pm, Cristian Ciobanu wrote: > > Hello, > > Yes, i know this, but i expected the IP to be allocated in this way by > the System (

RE: Unable to add Ceph KVM node in cloudstack

Hello Vadim, We have followed the same guide and using OVS version 2.3.2 . Ceph storage cluster is running on same KVM hypervisor and it fails when adding to cloudstack. Regards, Pradeep -Original Message- From: Vadim Kimlaychuk [mailto:va...@kickcloud.net] Sent: 08 September 2015

Re: CS 4.5.2: all hosts reboot after 3 days at production

Hello Remi, First of all I don't have /var/log/xha.log file. I have examined logs in detail and haven't found any trace that heartbeat has failed. The only serious problem I have found in management logs before restart is repeating many times error:

补充: kvm快照问题

补充：成功的时候是root卷，不是数据卷。 发件人： hang...@126.com 发送时间： 2015-09-08 15:21 收件人： users-cn 主题： kvm快照问题 大家好， 我想做数据卷的重现快照。结果发现快照可以创建成功，但快照的状态为error。 测试如下: 1.手动创建快照，创建后的快照状态依然为error。偶尔会成功一次。 2.将数据卷取消附加磁盘，再次手动创建快照，可以成功，状态为BackedUp。 3.job.expire.minutes 为1440.成功创建的话时间在10分钟左右。

Re: CCP-4.5.0: Adding additional interfaces are not accepting on VMs if the VM has vm snapshots

Dear Erik, Thanks for your replay. I am really not able to understand the information in the links which you provided I seen that some restrictions was there with VM snapshots in the links and fixes for the restrictions. What should I have to modify in the code to fix the issues with VM

Re: No attached volume found on Windows 2008

Luciano, fresh version of drives are available from here, as official distribution point so to speak: https://fedoraproject.org/wiki/Windows_Virtio_Drivers On 8 September 2015 at 14:27, Luciano Castro wrote: > Thanks Cristian!! > > It worked! > > @cloustackteam: > >

Re: CCP-4.5.0: Adding additional interfaces are not accepting on VMs if the VM has vm snapshots

Hi Anil, The links just explain what was done, and to some degree why. I don't know much more than that, except that we've learned to live with it. The rationale behind it seems to be that, due to the way CloudStack handles snapshots, there is a risk of data loss if you do changes to the VM, and

Re: No attached volume found on Windows 2008

Thanks Cristian!! It worked! @cloustackteam: Does it possible update the KVM docs? Thanks! On Mon, Sep 7, 2015 at 3:34 PM, Cristian Ciobanu wrote: > Hello, > >I found the solution that work for me to mount additional volume on > Windows system, you have to

RE: CCP-4.5.0: Adding additional interfaces are not accepting on VMs if the VM has vm snapshots

Agree with Erik, open a support ticket with Citrix. Regards, Somesh -Original Message- From: Erik Weber [mailto:terbol...@gmail.com] Sent: Tuesday, September 08, 2015 6:15 AM To: users@cloudstack.apache.org Subject: Re: CCP-4.5.0: Adding additional interfaces are not accepting on

RE: Usage Job failed

The time is reported in milliseconds "144117719" - look up on the internet for an online converter. Regards, Somesh -Original Message- From: mvs babu [mailto:mvsbabu0...@outlook.com] Sent: Monday, September 07, 2015 3:57 AM To: users@cloudstack.apache.org Cc:

RE: VPC VPN Connectivity Issues

No my issue is not resolved I've been reaching out to the IRC channel and have not received notification of anyone knowing what my issue could be. It would be great to get some traction this week on the issue. I keep having to open ACL for public access to the servers as this user is unable to

VirtIO disk latency in Wins2012 - repoted wrong

Hi, just wondering if anyone experienced bug - virtio or Win2012 reated, not sure, but I expect drivers bug... In Task Manage you can see average latency for IOs (I was doing FIO disk benchmark inside Windows) - this shows 1000 bigger latency than what can bee seen from Resource Manager (and FIO

Cloudstack sandbox installation and configuration.

Hello All, Please am new to cloudstack and i have been trying to install and configure cloudstack on my laptop so i can practice b4 deploying it on my production environment and i have been having alot of issues with it. Please I need directions on how to go about this and any link that can help

Re: Cloudstack sandbox installation and configuration.

Hi Ejike http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.5/ is a good starting point. Regards, Dag Sonstebo Cloud Architect ShapeBlue On 08/09/2015 14:44, "Ejike Daniel" wrote: >Hello All, > >Please am new to cloudstack and i have been

extended ACLs for VPC with VPC router

Hi, while fiddling around with cloudstack and a zone with advanced networking, I noticed that in a VPC I can only create ACLs, which are in Cisco terminology standard ACLs. Meaning, the rules always apply to the whole tier/network. E.g. an ingress rule allowing TCP/22 from CIDR 0.0.0.0/0 will

Re: Dynamic Scalable Template issue

Vadium, After installing XS62ESP1028 via CLI (no reboot on hosts yet) and building an Centos65 instance w/o ‘Dynamic Scalable’ option checked, it showed right in XenCenter. I installed the new tools from (XS62ESP1028) and still good. I created a template from this instance. Deployed said

RE: Cloudstack sandbox installation and configuration.

Hi, You can also use this link as a starting point http://www.shapeblue.com/virtualbox-test-env/ Thanks Glenn Wagner Senior Consultant, South Africa Phone: +27 21 527 0091 | Mobile: +27 73 917 4111 glenn.wag...@shapeblue.com | www.shapeblue.com | Twitter:@shapeBlue ShapeBlue SA (Pty) Ltd,

RE: Unable to add Ceph KVM node in cloudstack

Please share steps for adding ceph RBD as primary storage using KVM hypervisor in cloudstack. We are well aware of the best practices/recommendations for cloudstack. Regards, Pradeep -Original Message- From: Vadim Kimlaychuk [mailto:va...@kickcloud.net] Sent: 08 September 2015 12:14