Re: Secondary Storage VM Console Proxy creation failure

Hi Daniel, Your server have enough capacity but cloudstack server error indicates that your cluster and pod load as null value. My suggestion is you should recheck your management traffic ip configuration. Is that ips are communicate properly ? Please make sure your management traffic ip

Re: Secondary Storage VM Console Proxy creation failure

only have the default small and medium service offerings which are way below system specs albeit the CPU frequency is indeed not the same as what the system offers (it is lower) should it be the same? On 03/06/2015 11:48 AM, Gopalakrishnan S wrote: Your server have enough capacity

usage server empty data

Hi, Usage server keeps sending empty data. I have verified that cloudstack database and usage server DB details are configured properly. Noticed the following errors in log file, Anyone have the same issues? INFO [cloud.usage.UsageManagerImpl] (Usage-Job-1:null) starting usage job... DEBUG

Re: Usage Records not Generating.

sure all of them have usage servers running on them. On Wednesday 18 February 2015 06:12 PM, raja sekhar wrote: Hi Gopalakrishnan, I have check the db.properties file in both usage and management, both seems to be same and i have given usage.sanity.check.interval=1 in global conf. Regards

Re: Usage Records not Generating.

Hi RajaSekhar, You can review database connection settings in your management server db.properties file. also verify that usage.sanity.check.interval settings in your global conf. /etc/cloudstack/usage/db.properties /etc/cloudstack/management/db.properties Thank You. Gopalakrishnan.S Cloud

Re: SSVM agent state is Disconnected

Hi Abdul, Did you check the management server logs when you try to reconnect your agent? Check the agant status in your hypervisor machine. Please make sure you haven't any issue with the firewall. Thank You. Gopalakrishnan.S - Original Message - From: Abdul Rasool To:

Re: Bridging not working properly

- Fogpanel. - Original Message - From: Chris ccta...@gmail.com To: users@cloudstack.apache.org Sent: Wednesday, January 07, 2015 12:45 AM Subject: Re: Bridging not working properly Hi Gopalakrishnan, The mangement and storage range is 172.16.0.0/24 The public range is xxx.xxx.61.0/24

Re: Bridging not working properly

Hi Chris, What is the ip range and gateway which you have configured for management traffic in cloudstack PODS. Your cloudstack pod ips will communicate SSVM, etc., Thank You. Gopalakrishnan.S - Original Message - From: Chris ccta...@gmail.com To: users@cloudstack.apache.org

Re: how to download systemvm64 for 4.3.2

Hi, You can download cloudstack 4.3 KVM hypervisor system template here. http://cloudstack.apt-get.eu/systemvm/4.3/ Thank You. Gopalakrishnan.S - Original Message - From: linux...@gmail.com To: cloudstack-us...@incubator.apache.org Sent: Wednesday, December 24, 2014 1:27 PM Subject:

Re: Dockerr repo for cloudstack

Hi Prapul, You can use the following docker image for your cloudstack. https://registry.hub.docker.com/u/runseb/cloudstack/ Thank You. Gopalakrishnan.S - Original Message - From: prapul cool prapul_cool2...@yahoo.com.INVALID To: users@cloudstack.apache.org Sent: Wednesday, December

Re: [VOTE] Apache Cloudstack 4.3.2

Hi Suresh, It does not create ROOT volume due to storage unavailablilty. You should check your primary and secondary storage connections. Thank You. Gopalakrishnan.S Cloud Consultant - Fogpanel - Original Message - From: Suresh Sadhu suresh.sa...@citrix.com To:

Re: Adding Host with existing VM to CloudStack

Hi Anil, Cloudstack is not recommanded to adding host with existing VMs. If you try to add existing host then it will return error like The host joining the pool cannot have any running VMs. Because AgentManager will try to collect all the information about host and try to allocate management

Re: VM migration to cloudstack

Hi Vadim, If possible, you can try to create snapshot for the particular VM and export to file that snapshot or save as a Template then convert the template for VHD format. After that upload .vhd file as a template in ACS. Once the template uploaded, you can create VMs from that particular

Re: How to set the size of primary storage

Hi Yan, How many drives in your NFS server? One drive with 1TB disk and create NFS share folder on that drive? You may be created NFS folder on /root partition which may contain 100G disk. Please make sure your NFS folder drive size. Thank You. Gopalakrishann.S Cloud Consultant -

Re: Host with running VMs question.

the host forcefully then stilll VMs will show destroyed state again. You can manually change VMs state on database itself. Thank You. GopalaKrishnan S Cloud Consultant - Fogpanel - Original Message - From: Brent Clark bcl...@tendrilinc.com To: users@cloudstack.apache.org Sent: Wednesday

Re: Confusable default routing table on SSVM.

Hi Dan, It may caused your KVM host bridge settings. Please make sure its working fine using this command. [root@kvm ~]# brctl show Also check the KVM host /etc/cloudstack/agent/agent.properties file network segregation settings. guest.network.device=cloudbr0

Re: Adding host to CloudStack problem (KVM)

(KVM) Hello Gopalakrishnan, thank you for your suggestions. In fact network bridge settings were configured (cloudbr0, cloudbr1) before I have installed the Agent. I have tried to re-install the agent with but with no success. AppArmor/SELINX is off, firewall is OFF. I have tried

Re: Enquiry on Citrix XenServer Installation for Cloudstack

Hi Huishan, It allows only homogeneous xenserver host within cluster. Thank You. GopalaKrishnan.S - Original Message - From: Tim Mackey tmac...@gmail.com To: users@cloudstack.apache.org Sent: Tuesday, October 28, 2014 10:55 AM Subject: Re: Enquiry on Citrix XenServer Installation for

Re: Live migration failed

Hi Garith, Please make sure you have used the same cluster host to migrate your VM. Also make sure VMs should be running status while migration process. VMs should be used only shared primary storage. Also check your distination host have enough capacity. Thank You. GopalaKrishnan.S Cloud

Re: cannot ping to cloudstack instance

Hi Sanjaya, You should check Security Groups and Egress, Ingress rules for your instance user. Enable ICMP in Egress to ping your server. Thank You. GopalaKrishnan.S Cloud Architect at Fogpanel. - Original Message - From: Asanka sanjaya Herath angal...@gmail.com To:

Re: cannot ping to cloudstack instance

To: users@cloudstack.apache.org Sent: Thursday, September 25, 2014 1:31 PM Subject: Re: cannot ping to cloudstack instance Hi GopalaKrishnan, Thank you for help. I added Egress and Ingress rules as follows. TCP: start port-80 endport-80 CIDR-0.0.0.0/0 ICMP: type-0 code-0 CIDR-0.0.0.0./0 But still I

Re: cannot ping to cloudstack instance

: connect to host 192.168.56.135 port 22: Connection timed out I used default template(cent-os) provided by cloudstak. So where is the fault? On Thu, Sep 25, 2014 at 1:59 PM, Asanka sanjaya Herath angal...@gmail.com wrote: Hi Gopalakrishnan

Re: cannot ping to cloudstack instance

To: users@cloudstack.apache.org Sent: Thursday, September 25, 2014 4:15 PM Subject: Re: cannot ping to cloudstack instance Hi GopalaKrishnan, My /etc/conf file shows these information. search citrite.net nameserver 10.216.4.21 nameserver 10.216.4.34 nameserver 10.9.47.59 nameserver 172.16.2.66

Re: cannot ping to cloudstack instance

: ​Hi Gopalakrishnan, I added that. But still the same problem. I'll check my VMs Gateway and IP settings. Thank you.​ On Thu, Sep 25, 2014 at 4:28 PM, GopalaKrishnan go...@assistanz.com wrote: Hi Sanjaya, Just add the following entries in your VMs /etc/resolv.conf

Re: Billing/Helpdesk systems for CloudStack

Hi Sam, Checkout new fogpanel billing feature for cloudstack. http://fogpanel.com Thank You. GopalaKrishnan.S - Original Message - From: Sam s...@rshosting.com To: users@cloudstack.apache.org Sent: Thursday, September 11, 2014 5:32 PM Subject: Re: Billing/Helpdesk systems for

Re: Removing a single IP in a large range from cloudstack

Hi Justyn, You cannot remove particular ip address which is already assigned range of public ips. I am not sure how many VMs are running in these IP ranges. If the ip address is not used on that range then you can remove ip range and re add it. Otherwise you can manually edit ip address

Re: Default Centos Template installing template/Downloaded/null

Hi Sandeep, Regarding this console connection refused error. you should check host server firewall and enable SSL ports. iptables -A INPUT -m state --state NEW -m tcp -p tcp --dport 443 -j ACCEPT Thank You. Gopalakrishnan.S - Original Message - From: sandeep khandekar

Re: Unble to Add Second XenServer to a Cluster

Hi Sadhu, With all hosts added to the XenServer pool, run the cloud-setup-bond script. This script will complete the configuration and setup of the bonds on the new hosts in the cluster. Copy the script from the Management Server in

Re: help Need network settings for hypervisor host

Hi Sandeep, You should check your centOS server network bridge configuration and make sure its working before installation of KVM. http://www.cloudkb.net/setup-network-bonding-bridge-centos/ I had installed KVM on ubuntu server and it has been working fine. Thank You. GopalaKrishnan.S Cloud