Please see my work flow:
https://prnt.sc/uWF76ofrzBFC
https://prnt.sc/QCXKzF61ze5X
https://prnt.sc/Cn3jbKIel-Jk
https://prnt.sc/JOdqBQalfg0d
https://prnt.sc/88x5IAP_2ojp
https://prnt.sc/_zPRZPZ0cYRD
POD
172.22.0.1
255.255.252.0
172.22.0.51 172.22.0.60
Guest : vlan://untagged
172.22.0.1
255.
Hi,
Can you give more information ?
- zone type
- network type
- hypervisor type
- isolated method and vlan id
- network/nic/ip information of vms
Kind regards,
Wei
On Mon, 9 Oct 2023 at 06:56, Technology Mail
wrote:
> ok,
> I needed another function like add network to every vm for vm to vm
ok,
I needed another function like add network to every vm for vm to vm
communication (30.30.0.0/22)
how to create it?
---
Amin
On 10/4/2023 10:57 PM, Wei ZHOU wrote:
It looks the vm is not associated to any security groups. you need to
update the vm with security groups.
-Wei
Technology M
I skip this test using vLANID.
Now I test as below:
https://prnt.sc/uWF76ofrzBFC
https://prnt.sc/QCXKzF61ze5X
https://prnt.sc/Cn3jbKIel-Jk
https://prnt.sc/JOdqBQalfg0d
https://prnt.sc/88x5IAP_2ojp
https://prnt.sc/_zPRZPZ0cYRD
POD
172.22.0.1
255.255.252.0
172.22.0.51 172.22.0.60
Guest: vlan
It looks the vm is not associated to any security groups. you need to
update the vm with security groups.
-Wei
Technology Mail 于 2023年10月4日周三 下午5:48写道:
> I skip this test using vLANID.
>
> Now I test as below:
>
> https://prnt.sc/uWF76ofrzBFC
> https://prnt.sc/QCXKzF61ze5X
> https://prnt.sc/Cn3
I skip this test using vLANID.
Now I test as below:
https://prnt.sc/uWF76ofrzBFC
https://prnt.sc/QCXKzF61ze5X
https://prnt.sc/Cn3jbKIel-Jk
https://prnt.sc/JOdqBQalfg0d
https://prnt.sc/88x5IAP_2ojp
https://prnt.sc/_zPRZPZ0cYRD
POD
172.22.0.1
255.255.252.0
172.22.0.51 172.22.0.60
Guest : vla
You need to set the ports on your router to trunk mode (or hybrid mode
to allow vlan 20-50).
If you cannot configure the route, please use Shared networks (in basic
zone or advanced zone) with vlan://untagged.
-Wei
On Wed, 4 Oct 2023 at 14:17, Technology Mail
wrote:
> yes, your first think is
Hello,
Thank you for the response. In this case if your bridge is cloudbr0, then
your new bridge will be created and your physical interface that will be
tagged with VLAN 20 for example "ens9f0np0.20" and the traffic for the IP
range 172.22.0.1/22 might be unknown on that VLAN. Your guest bridge w
yes, your first think is right,
2nd I am using only one physical interface and all network tag is
*cloudbr0*, and I put vLANID 20-50 this is mandatory field so I input
this, just it.
Thanks.
On 10/4/2023 6:09 PM, Jayanth Reddy wrote:
Hello,
If I understand correctly, you've a network where
Hello,
If I understand correctly, you've a network where we can consider it as a
"management network" for your hosts. I believe your expectation is to have
your VMs attached onto the same management network on the bridge "cloudbr0"
so that you'll get access via your gateway 172.22.0.1.
I don't th
*Hello,*
Can I create Advanced zone using my only LAN network?
Internet traffic come from my LAN gateway. no any public ip on host kvm.
LAN: 172.22.0.1/22
kvm LAN: ens9f0np0
Bridge : cloudbr0
*cat ifcfg-ens9f0np0*
DEVICE=ens9f0np0
ONBOOT=yes
BRIDGE=cloudbr0
UUID=503ef6de-1288-4d2d-a09a-3f7d12
11 matches
Mail list logo