lt [mailto:fgaudrea...@cloudops.com]
>>> Sent: Wednesday, 22 May 2013 8:17 PM
>>> To:
>>> Cc: Jayapal Reddy Uradi
>>> Subject: Re: Juniper SRX Configuration
>>>
>>>
>>> Hi,
>>>> In network offering if you select ZONE
-Original Message-
From: Francois Gaudreault [mailto:fgaudrea...@cloudops.com]
Sent: Wednesday, 22 May 2013 8:17 PM
To:
Cc: Jayapal Reddy Uradi
Subject: Re: Juniper SRX Configuration
Hi,
In network offering if you select ZONE wide source NAT then source rules
are not configured by
audrea...@cloudops.com]
> Sent: Wednesday, 22 May 2013 8:17 PM
> To:
> Cc: Jayapal Reddy Uradi
> Subject: Re: Juniper SRX Configuration
>
>
> Hi,
> > In network offering if you select ZONE wide source NAT then source rules
> are not configured by cloudstack. Admin/User has to
Hi,
In network offering if you select ZONE wide source NAT then source rules are
not configured by cloudstack. Admin/User has to manually select source NAT ip
and configure the source NAT rules.
Ok, thanks for the precision.
When you configure firewall rules, firewall filter rules on srx g
currently we only support SourceNat Type : Per zone and in this case, you need
to manually configure source NAT in case of per Zone source NAT.
On 21-May-2013, at 11:56 PM, Francois Gaudreault
wrote:
> Jayapal,
>
> I added the SRX now, I can get the basic stuff working (private interface
> c
In network offering if you select ZONE wide source NAT then source rules are
not configured by cloudstack. Admin/User has to manually select source NAT ip
and configure the source NAT rules.
When you configure firewall rules, firewall filter rules on srx get configured.
Please try configuring t
Jayapal,
I added the SRX now, I can get the basic stuff working (private
interface created), but it looks like the source nat rules are not being
created. Also, when I create firewall rules, they are not being created
on the SRX. However, I can get the destination nat (port-forwarding)
work
For private interface just enable the vlan tagging. when guest network is
created cloudstack will configure the interface with vlan and ip.
Minimal config is.
1. set management interface with ip and use this ip for while add ing srx into
cloudstack.
2. enable vlan tagging on private interfac
Francois,
When you finally get this up and working, will you update the wiki the
pertinent bits?
--David
Not a bad idea :) I will.
Thanks!
--
Francois Gaudreault
Architecte de Solution Cloud | Cloud Solutions Architect
fgaudrea...@cloudops.com
514-629-6775
- - -
CloudOps
420 rue Guy
Montréa
On Tue, May 14, 2013 at 1:03 PM, Francois Gaudreault
wrote:
> Hi Jayapal,
>
>> To add SRX device into cloudstack, you need to preconfigure the srx. SRX
>> needs 3 interfaces to add into cloudstack
>> 1. management interface
>> 2. private/guest network interface
>> 3.public interace.
>
> Ok. It co
For private interface just enable the vlan tagging. when guest network is
created cloudstack will configure the interface with vlan and ip.
Minimal config is.
1. set management interface with ip and use this ip for while add ing srx into
cloudstack.
2. enable vlan tagging on private interface
Hi Jayapal,
To add SRX device into cloudstack, you need to preconfigure the srx. SRX needs
3 interfaces to add into cloudstack
1. management interface
2. private/guest network interface
3.public interace.
Ok. It confirms what I understood :)
Please find the below config. It is bit old clouds
Hi,
To add SRX device into cloudstack, you need to preconfigure the srx. SRX needs
3 interfaces to add into cloudstack
1. management interface
2. private/guest network interface
3.public interace.
Please find the below config. It is bit old cloudstak config on SRX, but it
will give you idea.
Yo
Hi,
I saw in the wiki there is a page for SRX configuration to integrate
with CloudStack. However, the steps are not really clear, and the
example config link is kinda broken. Does someone have a copy of this
example config somewhere?
Thanks!
--
Francois Gaudreault
Architecte de Solution
14 matches
Mail list logo
