Geoff,
I think I get it now. I didn't want to change anything in the router so
I first tried not using any vlan at all (as explained in the quickstart
guide) and it worked. Now I'm going to try setting up the box where I
have the cloud-management service as a inter-vlan router so I can test
Javier,
If I am understanding your information correctly, you have used a /16 network
and allocated IPs to both Management and Public Networks from this range.
These Networks should have unique CIDRs and not be part of the same IP range,
Some SSVM Networking Info: The SSVM gets 4 Network
Geoff,
Pod1 is using IPs in the subnet 172.16.0.0/16 its using the private
range 172.16.10.0 - 172.16.10.255 (add pod screen) and public range
172.16.20.0 - 172.16.20.255 (add guest network screen). In both cases
the gateway is 172.16.0.1 which is the same gateway shared by the
machines
Hi,
Im trying to perform a basic cloud installation with a single node
(using the basic deployment wizard). It goes through all the steps until
it gets stuck at Waiting For Built-In Templates To Load for some hours.
I found the following messages in the manager's log -debug enabled-:
Javier,
Its looks like your Management Network is set to a /16 and overlaps with your
'public' IP range
Regards
Geoff Higginbottom
D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
geoff.higginbot...@shapeblue.com
-Original Message-
From: Javier Rodriguez
Hi Geoff,
Sorry, I'm a bit confused. I didn't specifically configure the
Management Network range, I just followed the steps in the quick install
guide (
http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.0.2/html/Quick_Install_Guide/index.html),
both the system vms and the guest
Javier,
What CIDR did you use for the 'public' IPs?
Have you tried following the SSVM troubleshooting steps
https://cwiki.apache.org/CLOUDSTACK/ssvm-troubleshooting.html
Regards
Geoff Higginbottom
D: +44 20 3603 0542 | S: +44 20 3603 0540 | M: +447968161581
geoff.higginbot...@shapeblue.com