Hi folks,
Couple events are coming up in Europe:
-Geneva Meetup, May 14th: http://www.meetup.com/Geneva-CloudStack-User-Group/
-Linux Tag, Berlin, May 22-25. There will be a CloudStack booth and I will give
a talk on CloudStack and Big Data: http://www.linuxtag.org/2013/
-Bucarest Java User Gr
If that is the case, why can I access the internet from
The SSVM and the Console proxy? According to Xencenter,
They use the same exact network interface UUID the router does!
Warren
-Original Message-
From: Ahmad Emneina [mailto:[email protected]]
Sent: Tuesday, April 30, 2013 6:27 PM
I dropped a direct connection to the HW using XenCenter,
and statically configured the IP. That works fine, and
I am able to get on the internet.
However, doing it this way, I've lost the firewall protection
of the Cloudstack Router.
I would still like to know why the router isn't working.
I am assuming you are using XenServer. Is the domain router's public vif using
the correct network on the XenServer? This is the same network as the ssvm and
the console proxy which you say can access the internet. If the domain router
is on the same host using the same network and the same vlan
I ran into the same firewall issue with Xen the first time I tried a clean
install of CS 4.0.1 with XS 6.02 and CentOS 6.2.
After a few days of trying to determine the cause, I wiped the management
server and hosts and reinstalled. I was never able to duplicate that bug.
-Original Message
The Network ID of the SSVM, Console Proxy, and the Router are identical,
Same Network UUID and same VLAN.
I find it odd that on boot the router claims eth2 is down, and it
can't even ping itself on its public IP on eth2. Will changing the
firewall settings bring eth2 up?
Warren
-Original M
I do find it interesting that Xenserver and XenCenter report
one network UUID and cloudstack another.
Why don't these agree?
Warren
-Original Message-
From: Oliver Leach [mailto:[email protected]]
Sent: Wednesday, May 01, 2013 9:47 AM
To: [email protected]; a
I'm not sure I understand this egress firewall rules allowing
Outbound traffic comment.
Are you talking about the Source NAT or the Static NAT firewall?
In both cases, for the time being, I have no entries in either.
Doesn't that disable it?
Warren
-Original Message-
From: Oliver Leach
Are you using basic zone or an advance zone?
In advance zone, the domain router should have 3 interfaces - 1 on the private
vlan, 1 on the linklocal network and one on the public network, which is the
source nat for the account. What does ifconfig |grep inet -B 2 output? And do
these interfaces
1. We are using Advanced Zone.
2.
root@r-12-VM:~# ifconfig |grep inet -B 2
eth0 Link encap:Ethernet HWaddr 02:00:15:4c:00:04
inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0
inet6 addr: fe80::15ff:fe4c:4/64 Scope:Link
--
eth1 Link encap:Ethernet HWaddr
All IP's are in the correct ranges.
Warren
-Original Message-
From: Oliver Leach [mailto:[email protected]]
Sent: Wednesday, May 01, 2013 10:44 AM
To: [email protected]; [email protected]
Subject: RE: router not working
Are you using basic zone or an advance
And a netstat -rn on the domain router? Does the SSVM (which works) have a
similar ifconfig output and a similar netsta -rn output?
It is difficult to say that the virtual routers networks are correct from the
output below. Try this:
xe vif-list params=network-name-label,vm-name-label,device vm
root@r-12-VM:~# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
Iface
172.16.1.0 0.0.0.0 255.255.255.0U 0 0 0
eth2
10.1.1.0 0.0.0.0 255.255.255.0U 0 0 0
eth0
169.254.
Hi,
i am trying to implement a java code that should enable me to do simple
things: deploy Virtual machines for example.
I was advised to use Jclouds API, the problem is that i didn't find
"enough" documentation on how to use Jclouds on a cloudstack private cloud
.
Where can i find a jclouds
On Wed, May 1, 2013 at 1:14 PM, Seif Eddine Jemli
wrote:
> Hi,
>
>
>
> i am trying to implement a java code that should enable me to do simple
> things: deploy Virtual machines for example.
>
>
> I was advised to use Jclouds API, the problem is that i didn't find
> "enough" documentation on how t
That looks good to me. Couple of suggestions: try to ping the gateway of the
public network, 172.16.1.1. You could try a tcpdump. You need to run this on
the domain router console - tcpdump -n - -i eth2 icmp. Then on the dom0
console on the xenserver the domain router is running on, run this
I have another setup in a different location where I am getting the
following error. I have tested reading a writing to the sr mountpoint on
the different hosts and I don't see any problems there:
2013-05-02 00:00:42,845 DEBUG [cloud.storage.StorageManagerImpl]
(consoleproxy-1:null) Checking if w
Ping doesn't work.
When I run TCP dump, eth2 never receives any traffic.
Also, eth2 reports being down during the boot up console
of the router. I'm not sure what cloud-early-config is.
What is controlling eth2? I don't see a ifcfg-eth2 that
I can set ONBOOT="yes"
This sequence in the bo
I built another one, this time from my own Network service offering.
Same result.
Warren
-Original Message-
From: Oliver Leach [mailto:[email protected]]
Sent: Wednesday, May 01, 2013 1:32 PM
To: [email protected]
Subject: RE: router not working
That looks g
Perhaps this will help.
> -Original Message-
> From: [email protected] [mailto:[email protected]] On Behalf
> Of Rohit Yadav
> Sent: Monday, April 29, 2013 11:02 PM
> To: [email protected]
> Subject: Re: Typical Port Listing?
>
> On Tue, Apr 30, 2013 at 3:58 AM, Mathia
I have been using the CloudStack API from a test Java client I wrote.
If the code for this is of interest to you, just let me know.
On Wed, May 1, 2013 at 11:46 AM, David Nalley wrote:
> On Wed, May 1, 2013 at 1:14 PM, Seif Eddine Jemli
> wrote:
> > Hi,
> >
> >
> >
> > i am trying to implemen
Sorry, I forgot to add users list in To.
Thanks,
--
Toshiaki
> -Original Message-
> From: Toshiaki Hatano [mailto:[email protected]]
> Sent: Wednesday, May 01, 2013 2:58 PM
> To: [email protected]
> Subject: [DISCUSS] Linux native VXLAN support on KVM hypervisor
>
> Hi a
22 matches
Mail list logo
