Look at using KMS (key management server) to handle licensing.
On 7 Aug 2013, at 06:45, Ahmad Emneina wrote:
> You can probably have a windows license server and floating licenses if
> you're going to go heavy on the windows. You can also look at system center
> from microsoft.
>
>
> On Tue,
Hi Users,
I am running cloudstack 4.1 basic zone in my environment. I have used
local storage and shared storage nfs. New vms and existing vms are
ruunning fine in this storage, i use snapshot option in cloudstack to
create snapshot for both root disk and data disk of my vms. I am
receiving th
Just create a template with your SLA license.
After syspreping, the serial number will stay and you can just activate it.
Ofcourse, you can enter a new serial number before activation.
On 7/8/13 6:57 AM, Kristoffer Sheather @ CloudCentral wrote:
You need to manage them individually.
Regards,
K
Can you add the complete stack trace here? What is the hypervisor you are
using? Did you check the logs on hypervisor side? Do you see any error in
the logs?
On 07/08/13 1:37 PM, "[email protected]" wrote:
>Hi Users,
>
>
> I am running cloudstack 4.1 basic zone in my environment. I have u
Hi Jayapal,
I have incorporated your comments, and the updated doc is posted at
https://issues.apache.org/jira/browse/CLOUDSTACK-2685.
Thanks
-Radhika
From: Jayapal Reddy Uradi
Sent: Wednesday, August 07, 2013 11:15 AM
To: Radhika Puthiyetath
Subject: Re: [Doc] Egress Firewall Rules for Review
Hi,
I am using xen-server 6.0.2 i am not trace any error in my hypervsior.In
my cloudstack below is error:
2013-08-07 14:50:12,620 ERROR [cloud.async.AsyncJobManagerImpl]
(Job-Executor-1:job-1133) Unexpected exception while executing
org.apache.cloudstack.api.command.user.snapshot.CreateSnapsho
Hi Radhika, two comments:
* "If you decide to reserve IP ranges for non-CloudStack purposes, you
can specify a part of the IP address range or the CIDR that should only be
allocated by..."
Remove "IP address range" as we only specify the CIDR, not the
range.
*
KMS works very well for this purpose. You install the KMS license key once on
your kms server and then tell your windows guests to activate against it rather
than Microsoft. This way you don't have to assign a key to every guest vm.
You'll have to put your KMS server somewhere that is available
Have you checked /var/log/SM.log on your XenSErver? Did that give you any
additional info?
On 07/08/13 2:46 PM, "[email protected]" wrote:
>Hi,
>
>
> I am using xen-server 6.0.2 i am not trace any error in my hypervsior.In
>my cloudstack below is error:
>
>2013-08-07 14:50:12,620 ERROR [clou
i have reinstallaing the server.
> Have you checked /var/log/SM.log on your XenSErver? Did that give you any
> additional info?
>
> On 07/08/13 2:46 PM, "[email protected]"
> wrote:
>
>>Hi,
>>
>>
>> I am using xen-server 6.0.2 i am not trace any error in my hypervsior.In
>>my cloudstack below
Thanks Saksham.
They have been incorporated. The guide is refreshed and posted to
https://issues.apache.org/jira/browse/CLOUDSTACK-850.
From: Saksham Srivastava
Sent: Wednesday, August 07, 2013 3:06 PM
To: Radhika Puthiyetath; [email protected];
[email protected]; Abhinav Roy
On Tue, Aug 6, 2013 at 5:18 PM, Jason Pavao wrote:
> Folks,
> My initial approach to using cloudstack has been in the context of jenkins
> automation, but over time several new groups have been joining, and bringing
> in new hardware. I am trying to find an easy path to segmenting resources
> base
Not all the documentation bugs from 4.1.0 have been fixed.
I have added some new ones but they are not issues that will prevent
someone from installing.
Still looking for those!
Ron
On 06/08/2013 7:43 PM, David Comerford wrote:
hello everyone
i have installed cloudstack management server but
Hi,
I've done a template using debian 7.0.0, when i deploy an istance
from this template the VM at the first boot get correctly the
hostname from the DHCP server, then when I reboot the VM does not
get the hostname from the DHCP server, and the setted hostname is
Hi All,
I have created an ubuntu 12.04.2 template (created on an XCP 1.5 machine)
and am having inconsistent behavior. Sometimes it starts sometimes it
doesn't. Is there a particular OS Type that works best for ubuntu 12.04
since it is not in the dropdown? I was using "Other Ubuntu 64". Would
"O
Presently, secondary datastore is only supported as NFS (and not VMFS) -
primary can be VMFS.
You can use the remaining space on secondary datastore, but you will need to
present the VMFS space as NFS - which in simplest terms mean install a linux
instance on that datastore, allocate desired a
I guess I could be wrong if I assume that your SAN doesn't support NFS, so
I suggest you to provision new lun, and export the volume via NFSv3
What type of fcSAN are you using? Dell? HP?
On Wed, Aug 7, 2013 at 3:13 PM, Musayev, Ilya wrote:
> Presently, secondary datastore is only supported as
Hi All,
Thanks for your inputs. I have tried with the suggested changes but could
not get it working. I started from scratch again to see if it helps. But I
seem to be going wrong in some place.
Can some one kinldy go though the below setup and tell me if its right. I
am stuck since a week trying
Do you have any error messages in the log files that you can share?
Ron
On 07/08/2013 3:37 PM, Sarath Chandra wrote:
Hi All,
Thanks for your inputs. I have tried with the suggested changes but could
not get it working. I started from scratch again to see if it helps. But I
seem to be going wro
Hi, Carlos. Is the VM built for PV or HVM mode? If the VM is built for
PV mode you should use a PV-enabled OS Type, such as "Other PV
(64-bit)". If a PV-enabled OS Type doesn't work at all, the VM is
likely built for HVM mode so you can try the "Other (64-bit)" OS Type.
Best regards,
Kirk
On 0
On Wed, Aug 7, 2013 at 12:36 PM, Netsons > Roberto Iervolino <
[email protected]> wrote:
> Hi,
>
> I've done a template using debian 7.0.0, when i deploy an istance from
> this template the VM at the first boot get correctly the hostname from the
> DHCP server, then when I reboot the VM doe
Hi Kirk.
It is a PV image.
On CS 4.1 I notice that it now has a 12.04 entry. Do you know if it
assumes PV or HVM?
thanks
Carlos
On Wed, Aug 7, 2013 at 1:27 PM, Kirk Kosinski wrote:
> Hi, Carlos. Is the VM built for PV or HVM mode? If the VM is built for
> PV mode you should use a PV-enabled
This is probably more of a question for the XS forums but thought I'd get
you alls perspective too.
We are moving buildings and need to move our CS + XS hardware. What it the
recommended way to do that?
I was thinking of the following steps:
1) stop the CS management server
2) pause/stop every VM
I would use CS to shutdown all instances. Then shutdown the management
server, then hosts, then reverse it on the other end. But wait for others
to chime in before moving forward.
Regards,
Kirk Jantzer
http://about.me/kirkjantzer
On Aug 7, 2013 8:21 PM, "Carlos Reategui" wrote:
> This is probab
Kirk is right, us CS to shutdown all VMs, this will remove any VM to Host
mapping and ensure all VMs are safely stored on storage.
I would seriously consider taking a backup of storage before moving it as you
never know someone could drop the chassis etc.
Once all VMs are stopped, place all sto
1.I use snapshot schedule to create snapshots daily,keep 3 snapshots.Now I can
see 3 snapshots on webUI,but all snapshot files created before are still on
secondary storage.
How to let cloudstack clean the old snapshots files?
2.There are global settings about "delta snapshot" and "full snapshot
Hi,
I Followed the following url to add the Password Management in OS
templatesplace the "cloud-set-guest-password" in the /etc/init.d/.
When i try to deploy the new VM with this template,VM deployed successfully
and prompt the new password,but when try to login to VM...the new password
doesn
About the first question:
Are you talking about the recurring snapshot feature? If yes, AFAIK, It is
supposed to delete the 1st snapshot when you take the 4th one.
Regarding the second one,
You are right about settings present in global category for full and delta
and they are closely tied to hy
Since you made this as a startup script, what do you see just before the
guest login prompt appears? Do you see any errors when the script executed
or does it say it has set the password successfully.
At the same time, you can also check on your VR for
/var/cloud/cache/password file and see the pa
Hi Venkata,
Thanks for the replyas the script run successfully and prompt the new
password...but when i try to login...i couldn't be able to login with the
prompted password
I tried to run the script on guest VM,it throws error :-
--
[root@test3 init.d]# ./cloud-set-g
Thanks Bharat. I have incorporated the changes.
The latest guide is attached at
https://issues.apache.org/jira/browse/CLOUDSTACK-804
From: Bharat Kumar
Sent: Friday, August 02, 2013 11:14 AM
To: Radhika Puthiyetath
Cc: Kiran Koneti
Subject: Re: [Doc] Non Contiguous VLAN Ranges for Review
Hi Rad
Hi
Did you prepare this script in windows environment? Seems like some control
characters got inserted in the script.
-Harikrishna
On 08-Aug-2013, at 10:25 AM, Punit Dambiwal wrote:
> Hi Venkata,
>
> Thanks for the replyas the script run successfully and prompt the new
> password...but wh
NoI just copied this from sourceforge and run
On Thu, Aug 8, 2013 at 1:47 PM, Harikrishna Patnala <
[email protected]> wrote:
> Hi
> Did you prepare this script in windows environment? Seems like some
> control characters got inserted in the script.
>
> -Harikrishna
>
> On 08-Au
It can delete the older snapshots on the webUI,but the files are not deleted
actually.
If I go to the snapshot folder of secondary storage,I can see all the snapshot
files.
I use kvm as hypervisor,could you tell me how to let cloudstack create delta
snapshots daily and full snapshots every 7 da
This is a bug with 4.0 and it has been fixed in the upcoming release:
https://issues.apache.org/jira/browse/CLOUDSTACK-643
On Thu, Aug 08, 2013 at 02:09:28PM +0800, WXR wrote:
> It can delete the older snapshots on the webUI,but the files are not deleted
> actually.
> If I go to the snapshot fol
Try these:
https://github.com/shankerbalan/cloudstack-scripts
On Thu, Aug 08, 2013 at 02:09:02PM +0800, Punit Dambiwal wrote:
> NoI just copied this from sourceforge and run
>
>
> On Thu, Aug 8, 2013 at 1:47 PM, Harikrishna Patnala <
> [email protected]> wrote:
>
> > Hi
> > Did
Yes I just checked the script it contains control characters.
Please use the script at link
https://github.com/apache/cloudstack/blob/master/setup/bindir/cloud-set-guest-password.in
On 08-Aug-2013, at 11:46 AM, Prasanna Santhanam wrote:
> Try these:
> https://github.com/shankerbalan/cloudstack-
Hi,
I tried this same error..
On Thu, Aug 8, 2013 at 2:14 PM, Prasanna Santhanam wrote:
> Try these:
> https://github.com/shankerbalan/cloudstack-scripts
>
> On Thu, Aug 08, 2013 at 02:09:02PM +0800, Punit Dambiwal wrote:
> > NoI just copied this from sourceforge and run
> >
> >
> > On Thu
Hi Harikrishna,
I tried with your and prasanna suggested scripts...but both have the same
error :-
[root@test3 init.d]# sh cloud-set-guest-password
: command not foundsword: line 7:
: command not foundsword: line 24:
: command not foundsword: line 25:
: command not founds
There's a problem with your editor likely. From the guest
just do a wget of the script and save it instead of copy-pasting using
an editor.
On Thu, Aug 08, 2013 at 02:26:54PM +0800, Punit Dambiwal wrote:
> Hi Harikrishna,
>
> I tried with your and prasanna suggested scripts...but both have the s
Hi Prasanna,
*I try to wget this but the downloaded file is with html tags...do you
have another way to download this.*
On Thu, Aug 8, 2013 at 2:30 PM, Prasanna Santhanam wrote:
> There's a problem with your editor likely. From the guest
>
> just do a wget of the script and save it instead of
Hit the "RAW" button and use the resulting link.
On Thu, Aug 08, 2013 at 02:37:46PM +0800, Punit Dambiwal wrote:
> Hi Prasanna,
>
> *I try to wget this but the downloaded file is with html tags...do you
> have another way to download this.*
>
>
> On Thu, Aug 8, 2013 at 2:30 PM, Prasanna Santhan
Hi,
Please take the below script
http://pastebin.com/1RWdYJcF
Thanks,
Jayapal
On 08-Aug-2013, at 12:12 PM, Prasanna Santhanam
wrote:
> Hit the "RAW" button and use the resulting link.
>
> On Thu, Aug 08, 2013 at 02:37:46PM +0800, Punit Dambiwal wrote:
>> Hi Prasanna,
>>
>> *I try to wget th
43 matches
Mail list logo
