On Nov 18, 2013, at 12:03 AM, "Xuan Luo" <[email protected]> wrote:
> hello,everyone!
> I got a windows8 32bit iso,and want to try it on my VM created by Cloudstack
> 4.2.0,and hypervisor is KVM.
> Firstly,windows logo shows :D,then display a black backgroud with lines of
> error.Error code is 0
Hi,
I would like to install cloudstack on Arch linux.
1) The default bin/python on arch points to python3 rather than python2
while clpoudstack expects python2. Anyway to get around this.
2) The maven install doesn't work and throws errors i am unable to
decipher. Are there any dependencies other t
Dear colleagues,
As far as I understand, CloudStack doesn't support volume snapshots in KVM
clusters anymore.
Does anyone use any "dirty hacks" for backing up volumes?
--
V.Melnik
Hi.
I have setup CloudStack in the way that management server is running on a
VM on a KVM/QEMU host and used management server as NFS server as well.
System VMS show running in both UI and through virsh command line. However
they are not reachable and cannot open their console. I tried to get int
On 18.11.2013 11:27, Vladimir Melnik wrote:
Dear colleagues,
As far as I understand, CloudStack doesn't support volume snapshots in
KVM
clusters anymore.
Does anyone use any "dirty hacks" for backing up volumes?
Hi,
That's not correct, you can snapshot (back up) root and data disks fro
Thank you so much!
I didn't know it has been disabled.
-Original Message-
From: Nux! [mailto:[email protected]]
Sent: Monday, November 18, 2013 2:41 PM
To: [email protected]
Subject: Re: Backing up volumes on KVM hypervisors
On 18.11.2013 11:27, Vladimir Melnik wrote:
> Dear coll
Hi.
How do I now get help from this mailing list? Can you help me solve my
issue?
Regards.
On Mon, Nov 18, 2013 at 4:49 PM, Vladimir Melnik wrote:
> Thank you so much!
>
> I didn't know it has been disabled.
>
> -Original Message-
> From: Nux! [mailto:[email protected]]
> Sent: Monday, N
Hi everyone,
If you are in Europe and can hope on a plane/train/car quickly,
There is still time to join the super exciting CloudStack Collaboration
Conference which starts Wednesday:
http://cloudstackcollab.org
Follow the conference on twitter @CCCEU13 we will make a lifestream link
availabl
Hello,
I want to use Qemu 1.6.1 together with cloudstack, so I've compiled and
installed it myself.
Test Setup:
CentOS6.4
KVM HVs
CS-Management and HV on different hosts
Now when I setup a first zone, system VMs won't start. I'm seeing this
in /var/log/cloudstack/agent/cloudstack-agent.err:
lib
Hi.
I have setup CloudStack in the way that management server is running on a
VM on a KVM/QEMU host and used management server as NFS server as well.
System VMS show running in both UI and through virsh command line. However
they are not reachable and cannot open their console. I tried to get int
Hi all,
Is it possible to install a working cloudstack instance in a VM for
testing, using qemu as the hypervisor? Networking also seems a bit more
complicated. Any tips would be wonderful! Right now we are using
OpenStack but I getting very annoyed with it.
Thanks,
Sam
On Nov 18, 2013, at 9:26 AM, Samuel Winchenbach wrote:
> Hi all,
>
> Is it possible to install a working cloudstack instance in a VM for
> testing, using qemu as the hypervisor? Networking also seems a bit more
> complicated. Any tips would be wonderful! Right now we are using
> OpenStack
Thank you for your reply,i tried 64-bit win8 ISO later,and it works!(by the
way,install win8 will take much longer than old windows OS).
I think this is a KVM problem as well,maybe because KVM's qume CPU can't
support some function like 'cpu cache..',and this function is supported by
physical CP
You ask questions that you have researched without finding a solution.
You give as many details as you can.
People who find your question interesting and something about which they
think they know some hints, will make suggestions about how you can fix it.
If you want someone to take responsibi
Hello everyone!
I want to develop a Signature Based Distributed Intrusion Detection System
(DIDS) to detect distributed intrusions in Cloud environment.
Yes, I intend to deploy it in CloudStack.
I want to modify the correlation module to enhance detection capability
already being provided by Snor
Hi Folks,
I'm beginning on cloudstack 4.2 and I would like to know the best practices
about the storage.
I would like to know what kind of storage do you recommend or prefer to
use for the primary and secondary storage?
Which important point should we be meticulous on for the primary (i.e
perfor
Hello Pascal ,
Primary storage depend what you want or offer, if you have a money get fc
hba get fc storage or use ssd storages for high performance
If you need automation use supported storages like netapp , solid fire
If you are open to open world use ceph could be very interesting with
QEMU/KVM
Hello,
I've found the solution (through libvirt/log on the HV). I've
misconfigured the secondary storage, therefore I downloaded the template
into the wrong placed and it could not be found.
Thanks anyway,
Andi
Hey all,
i played a little bit arround with CS 4.2. I have one problem... My console
functionality recently stopped working. If i click on launch console, i
immediatly get a pop-up with the following XML error code:
401unable to
verify user credentials
After that, i immediatly get logged out of
Hi everybody
I need to monitor the use of internet bandwidth of every customer on my
platform.
Measuring the internet bandwidth use outgoing the virtual routers could
be the best practice to do that
The problem is that the virtual routers are created by CloudStack out of
the box without snm
Hello Gerolamo,
I¹m looking for it too
I do not have a knowledge yet but usage meter may help but what i¹m
thinking i don¹t know what switch you use but switch to open virtual
switch and get the flow data and send it to any software and measure there
usage.
I¹m waiting other replies :D
Also i k
Hello everyone
When I lunch vm console, I get a blank page not sure on whats causing it, I
always end up restarting the vm, and the issue is resolved temporarily it
works fine for a day or so.
dose anyone else experiencing the same issues?
CS 4.2 with Xenserver 6.2
Thanks
Hi.
I have setup CloudStack in the way that management server is running on a
VM on a KVM/QEMU host and used management server as NFS server as well.
System VMS show running in both UI and through virsh command line. However
they are not reachable and cannot open their console. I tried to get int
Hi David,
Thanks for the reply.
I just did some more troubleshooting and I can definitely see using
dhcpdump on the VR that it only receives a DHCPREQUEST when the Guest VM is
on the same KVM Host. If I migrate the guest to any other KVM Host that
request never even makes it to the VR. I monitore
Did you downloaded system vm templates and sure its in your nfs share ?
Also i remember that installation guide there is a special config you have
to do if nfs run on management.
I¹m not faced such issue on my installation
Regards
VM
On 18/11/13 19:38, "Fariborz Navidan" wrote:
>Hi.
>
>I have se
Robert,
1. Snort engine has its various limitations, unless we have reservations to use
it. Instead , we can go with Suricata.
2. Suricata is multithreaded against snort which is single threaded.
Performance is one big issue with snort.
3. snort works under dual license mode, controlled by it
Hi Graeme,
As for your first question, if you just want to try out S3, yes, you
should be able to remove your current NFS and add S3 to play with it. But
remember that by doing that, you cannot use old templates or volumes or
snapshots stored in your old NFS, only newly created objects wil
Andrei, that is not true. CS will not automatically copy all the data from
existing NFS to the new NFS added, only for those templates that are
cross-zone. NFS to S3 migration is not done that way either, actually is
done on demand. Please see
https://cwiki.apache.org/confluence/display/CLOUDSTACK/
Hi.
When I destroy VMs using virsh it creates them again but with the same
status. I have downloaded system vm templates already. I think there is an
issue with network bridges configuration. How do I get into VMs through
virt-manager? It asks for password.
On Mon, Nov 18, 2013 at 9:12 PM, Vahri
To answer my own question, there is documentation for CloudPlatform that
appears to explain the setup.
http://support.citrix.com/servlet/KbServlet/download/35762-102-706733/CitrixCloudPlatform4.2InstallationGuide.pdf
On Wed, Oct 2, 2013 at 10:40 AM, Jason Davis wrote:
> Looking at the release n
I know that such command is available only for Xen but looks like its used
for all
Check this link , this guy install the kvm on ubuntu
http://www.greenhills.co.uk/2013/08/30/cloudstack-single-server-on-ubuntu-w
ith-kvm.html
And Debugging System Vms section , its connected via link local ip
ssh
Here is what I've done on each virtual router:
apt-get update
apt-get install snmpd
apt-get install snmp
apt-get install snmp-mibs-downloader
chkconfig --add snmpd
chkconfig snmpd on
vi /etc/default/snmpd
#export mibs
SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -p /var/run/snmpd.pid 0.0.0.0'
mv /e
Hi.
I could ssh into both system vms. However they can reach each other but
cannot reach internet nor can be reached from internet via public ip. It
means my network bridges are miss-configured. righ?
On Tue, Nov 19, 2013 at 12:07 AM, Vahric Muhtaryan wrote:
> I know that such command is availa
Brandon,
Just wondering, could you add other applications in the same way.
More specifically: http://sourceforge.net/projects/ipt-netflow/
Basically, adding netflow output for DDoS detection would be a nice addition...
Sincerely,
Eric Tykwinski
TrueNet, Inc.
P: 610-429-8300
F: 610-429-3222
On
Hi All,
Using CS 4.2 on Centos 6.4 with KVM hosts.
I created a Windows 2008 Instance to make a template with. After making the
template I tried destory the instaces but it has been stuck on expunging for
over a day. My global settings are set to expunge after 10 mins.
I would appropriate any
On 18-Nov-2013, at 10:18 pm, Marcel Peter wrote:
> Hey all,
>
> i played a little bit arround with CS 4.2. I have one problem... My console
> functionality recently stopped working. If i click on launch console, i
> immediatly get a pop-up with the following XML error code:
>
> cloud-stack-versi
Hi,
Copying Jessica, the contributor of this feature documentation to answer your
query.
-Radhika
-Original Message-
From: Jason Davis [mailto:[email protected]]
Sent: Wednesday, October 02, 2013 9:11 PM
To: users
Subject: Bare Metal Docs for 4.2.0?
Looking at the release notes it loo
Hi,
Check the reachability from System VMs to management server. Also check port
8250 is allowed on management server.
Thanks,
sanjeev
-Original Message-
From: Fariborz Navidan [mailto:[email protected]]
Sent: Monday, November 18, 2013 5:54 PM
To: [email protected]
Subjec
HI Marcel,
You might want to check your browser setting to verify if the browser allows
cookies.
Same issue has been discussed previously, check if you can get some help from
this thread: http://apache.markmail.org/message/mckvmthlzybu3m5u
--Sanjay
> -Original Message-
> From: Marcel P
Can you also check if the global config parameter "host" is set to your
management server IP address, otherwise agent won't be able to reach the MS.
--Sanjay
> -Original Message-
> From: Sanjeev Neelarapu [mailto:[email protected]]
> Sent: Tuesday, November 19, 2013 10:56 AM
>
40 matches
Mail list logo
