Thank you for your reply.
Then, can I think of it as being able to adjust the time by changing the
token in /etc/corosync/corosync.conf?
And the site I searched and found was explaining to disable fencing.
If so, could you introduce me to a site or blog that explains by activating
fencing?
I am a
Thank you for your reply.
Then, could you explain how to activate and set the stonith?
Or let me know the blog or site you know.
I looked up the site I found and proceeded with the setting, and almost all
the sites explained it with the setting I set.
On Tue, 2022-08-09 at 15:23 +0900, 권오성 wrote:
> Hello.
> I installed linux ha on raspberry pi as below.
> 1) 1) sudo apt-get install pacemaker pcs fence-agents resource-agents
> 2) Host Settings
> 3) 3) sudo reboot
> 4) 4) sudo passwd hacluster
> 5) 5) sudo systemctl enable pcsd, sudo systemctl
Hi!
Digging further in ldirectord, I found that the utility functions do no make a
difference between a name that is not known, and a name that is (probably)
known, but cannot be resolved at the moment.
I hacked the corresponding functions to observe and return the error code
(errno) as a
Hi,
It seems that you are using pcs 0.9.x. That is an old and unmaintained
version. I really recommend updating it.
I can see that you disabled stonith. This is really a bad practice.
Cluster cannot and will not function properly without working stonith.
What makes you think nodes are
Hello.
I installed linux ha on raspberry pi as below.
1) 1) sudo apt-get install pacemaker pcs fence-agents resource-agents
2) Host Settings
3) 3) sudo reboot
4) 4) sudo passwd hacluster
5) 5) sudo systemctl enable pcsd, sudo systemctl start pcsd, sudo systemctl
enable pacemaker
6) 6) sudo pcs
