:This is a long post. Kept it on Users (where it started), and because
:I'm hoping others here might be able to tell us whether or not their
:systems use the same Texas Instruments OHCI Compliant IEEE 1394 Host
:Controller I have in my system (vendor=104c, dev=803a), and if they are
:also havi
-
(meta)
new to the list, new to DragonFlyBSD.
This is a long post. Kept it on Users (where it started), and because
I'm hoping others here might be able to tell us whether or not their
systems use the same Texas Instruments OHCI Compliant IEEE 1394 Host
Controller I have in my
I don't think there's anything we can do, the machine took a NMI fault
in the middle of a normal instruction. There might be some BIOS settings
you can play with but it looks like a real ram fault to me. I searched
around google for a bit but didn't see anything specific.
I 'd like to install DragonFly 1.12.1 on my Sony Vaio NR21Z, but
whilst DragonFly load, it appears:
RAM parity error, likely hardware failure
Fatal trap 19: non-maskable interrupt trap while in kernel mode
instruction pointer = 0x8:0xc04a7750
stack pointer = 0x10:0xc07789e4
frame pointer
