No that I use smsbox, but assuming that this is a TCP/IP reset message,
could you not take a tcpdump of the ports between smsbox and bearerbox and
perhaps also to the SMSC (is this a tcp connection?). This may help
determine what is going on.
Cheers,
Mark
-Original Message-
From: Scott
Hi,
I've never seen
these messages before, but I guess that they are to do with the Kannel
documetation. Try appending --disable-docs to the ./configure
line.
Hope this
helps,
Mark
-Original Message-From: Nil Mekki
[mailto:[EMAIL PROTECTED]]Sent: 30 November 2002 10:09To:
Message-
From: Pate Mark-marpate1 [mailto:Mark.Pate;motorola.com]
Sent: 25 October 2002 09:02
To: 'Ivone Uribe'
Cc: [EMAIL PROTECTED]
Subject: RE: Kannel/WTLS, pleas!kwtls_patch
Hi Ivone,
I've just taken a look through the source code (gw/bb_udp.c) and it seems
that you need to create a wtls
Hi Paul,
Thanks for the feedback. I previously downloaded the openssl source and
re-compliled. This seems to have rc5 enabled as I can see the rc5.h file and
the rc5 functions are present in libopenssl.a.
Cheers,
Mark
-Original Message-
From: Paul Keogh [mailto:[EMAIL PROTECTED]]
Hi Garl,
Unfortunately, I have not tested Kannel with IDEN. What is the IDEN packet
service? Is it similar to GPRS - if so, this works.
Ivone has posted a problem with a IDEN configuration issue also. Her device
seems to be using port 9203 to connect with. Try changing the WAP port
number of
Hi Garl,
I've just tried 9203 in our lab and this is not working either.
lsof | grep 902[0-8] shows that only ports 9200 and 9201 are being listened
to by bearerbox.
tcpdump shows that port 9203 is unreachable.
I haven't seen anything in the documentation that will limit bearerbox to
these
use the
standard ports for this.
Mark
-Original Message-
From: Pate Mark-marpate1 [mailto:[EMAIL PROTECTED]]
Sent: 15 October 2002 11:55
To: [EMAIL PROTECTED]
Subject: RE: Configuration - IDEN PD
Hi Garl,
I've just tried 9203 in our lab and this is not working either.
lsof | grep
Hi Joerg,
Have you linked to it in rc3.d?
ln -s /etc/rc.d/init.d/kannel /etc/rc3.d/S99kannel
ln -s /etc/rc.d/init.d/kannel /etc/rc2.d/K99kannel
Hope this helps,
Mark
-Original Message-
From: Joerg Eggink [mailto:[EMAIL PROTECTED]]
Sent: 15 October 2002 12:58
To: 'Stephane Pointu';
Hi
Garl,
I'm still working on
it. It looks like the FAQ may be out of date.
What I have done so
far is :
re-installed openssl
from source code (the Redhat RPM version does not support
rc5).
in the Kannel source
tree, I have done :
rm
./config.cache
./configure
Hi Alan Gustavo,
This is not a Kannel problem, it is related to the OS that you are using.
The start-stop-daemon is included with Debian, I believe. It does not come
with any other distribution.
What you need to do is either run the bearerbox and wapbox manually, or
create your own init
Hi Ivonne,
I have only just started using Kannel, so at this stage, this is what I
believe to be true.
When establishing a WAP session, some phones do not specify the URL to which
to connect to. In these circumstances, we set the device-home field in
wapkannel.conf to allow Kannel to serve a
Hi Yury,
There is something similar in SS7 signalling.In this case, we do :
(MCC digit 2) (MCC digit 1) F (MCC digit 3) (MNC digit 2) (MNC digit 1)
I think that if you have a 3 digit MNC (which is coming), then the F is
replaced with that.
I hope that this is true for your question
12 matches
Mail list logo