Hello,
My environment is:
FC5 with Kannle 1.4.0 and GSM Modem as Falcom Samba 55(USB).
I am able to detect Modem on the OS. Getting output in dmesg and /proc/bus/usb/devices.
But when i configure the same in Kannel am gettingOpening failed. Terminating error as follows:
2006-08-21 14:21:26
Hello,
My environment is:
FC5 with Kannle 1.4.0 and GSM Modem as Falcom Samba 55(USB).
I am able to detect Modem on the OS. Getting output in dmesg and /proc/bus/usb/devices.
But when i configure the same in Kannel am gettingOpening failed. Terminating error as follows:
2006-08-21 14:21:26
Hi,
FC5 should use CDC-ACM for the modem,
check /var/log/messages and see if it is picking up
the modem and which driver its loading.
Also, it should set the device as ttyACM0 ( or 1,
2, 3)
(check you logs file!) If so, then use this in your
kannel config (/dev/ttyACM0)
- Original
Hello,Another possiblity is that your kannel is confifured for debugging, then it will be slowIf this is the case, configure for speed (--with-defaults option)AarnoOn 11 Aug 2006, at 17:34, Fourat Zouari wrote:Hello,Thanks for your helpSMSC is limiting the traffic to 2sms/s, i dont have a big
Hi Kavuri,to send message to ppg, you must do http post, not get.AarnoOn 18 Aug 2006, at 07:47, Kavuri Prasad wrote:Hi Deon, Thanks for your reply. I followed exactly as you said. But I am getting an error at Kannel side : Can you please guide me about setting the content type as header. I am
Hello,
does PPG work ?
Aarno
On 18 Aug 2006, at 23:12, Alex Kinch wrote:
Hello,
Seem to be having some problems with WAP push. The code to construct
the UDH and message is below. It used to work, but then somewhere
along the line it stopped.
Tried to both Nokia and SonyEricsson handsets,
try
speed=115200
- Original Message -
From:
Leonard
To: Vaibhav Solanki ; users@kannel.org
Sent: Monday, August 21, 2006 8:10
PM
Subject: Re: Modem configuration help
!
Hi,
FC5 should use CDC-ACM for the
modem,
check /var/log/messages and see if
/var/log/messages output:
Aug 22 11:13:50 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 4Aug 22 11:13:50 localhost kernel: usb 3-2: configuration #1 chosen from 1 choiceAug 22 11:13:50 localhost kernel: ftdi_sio 3-2:
1.0: FTDI USB Serial Device converter
