On Tue, 2020-05-26 at 13:19 -0400, Tom Horsley wrote:
> If it is a network printer you could run a windows virtual machine
> and print from there (maybe USB pass-through would also work
> for a direct connection).
I think network printers are always the way to go. You can put the
printer anywhere
On Tue, 2020-05-26 at 18:56 -0500, Michael Hennebry wrote:
> VESA notices several resolutionns,
> including 1024x768 and 800x600 .
> I really do not understand why none of them are allowed.
As a general answer, the system checks out what the graphics chipset
can produce, and what the monitor suppo
On Tue, 2020-05-26 at 11:56 -0700, stan via users wrote:
> However, this could be a corner case that is difficult to solve, and
> thus a known issue where the solution is 'Don't do that!'.
I have to say that if I set something playing in Firefox and Audacity
(on CentOS, mind you, which also uses p
On 5/26/20 7:46 PM, Michael Hennebry wrote:
On Tue, 26 May 2020, Samuel Sieb wrote:
On 5/26/20 12:24 AM, Michael Hennebry wrote:
Note that since I using a live DVD,
changing a config file and
rebooting is not really an option.
Are you using a physical DVD or a live image put on USB? If yo
On 5/26/20 7:56 PM, Michael Hennebry wrote:
On Tue, 26 May 2020, Samuel Sieb wrote:
If you don't make any changes to the boot command line other than
adding a "3" at the end, does it boot to a login prompt?
Yes.
I'm using it.
I suppose this means that if I knew the right incantation,
I could
On Tue, 26 May 2020, Samuel Sieb wrote:
If you don't make any changes to the boot command line other than adding a
"3" at the end, does it boot to a login prompt?
Yes.
I'm using it.
I suppose this means that if I knew the right incantation,
I could get what I want with startx and the
right co
On Tue, 26 May 2020, Samuel Sieb wrote:
On 5/26/20 12:24 AM, Michael Hennebry wrote:
Note that since I using a live DVD,
changing a config file and
rebooting is not really an option.
Are you using a physical DVD or a live image put on USB? If you put it on
USB, then you can add an overlay
On Tue, 26 May 2020, Michael Hennebry wrote:
According to modprobe, lsmod and /proc/modules ,
i915 exists and intel_gap does not.
VESA notices several resolutionns,
including 1024x768 and 800x600 .
I really do not understand why none of them are allowed.
Also, I do not understand this snippet
On 5/26/20 12:24 AM, Michael Hennebry wrote:
On Tue, 26 May 2020, Michael Hennebry wrote:
How do I get xrandr or something else to do what I want,
i.e. change my resolution to 1440x900
when using the live DVD..
Note that since I using a live DVD,
changing a config file and
rebooting is not re
According to modprobe, lsmod and /proc/modules ,
i915 exists and intel_gap does not.
VESA notices several resolutionns,
including 1024x768 and 800x600 .
I really do not understand why none of them are allowed.
--
Michael henne...@web.cs.ndsu.nodak.edu
"Sorry but your password must contain an u
On Tue, 26 May 2020, George N. White III wrote:
On Tue, 26 May 2020 at 16:19, Michael Hennebry <
henne...@web.cs.ndsu.nodak.edu> wrote:
I upgraded from 2GB to 8GB.
liveuser@localhost-live ~]$ lspci | head -3
00:00.0 Host bridge: Intel Corporation 82Q33 Express DRAM Controller (rev
02)
00:02.
On 2020-05-26 15:22, Ed Greshko wrote:
On 2020-05-27 03:47, ToddAndMargo via users wrote:
Normally when I start virt-mamager, I get a root password
prompt from xfce-polkit.
Don't forget to add the user to the libvirt group in /etc/group. You won't
get a password prompt if you do that.
:-)
On 2020-05-27 03:47, ToddAndMargo via users wrote:
> Normally when I start virt-mamager, I get a root password
> prompt from xfce-polkit.
Don't forget to add the user to the libvirt group in /etc/group. You won't
get a password prompt if you do that.
--
The key to getting good answers is to as
On Tue, 26 May 2020 at 16:19, Michael Hennebry <
henne...@web.cs.ndsu.nodak.edu> wrote:
> On Tue, 26 May 2020, George N. White III wrote:
>
> > On Tue, 26 May 2020 at 04:25, Michael Hennebry <
> > henne...@web.cs.ndsu.nodak.edu> wrote:
> >
> >> On Tue, 26 May 2020, Michael Hennebry wrote:
> >>
> >
On Tue, 2020-05-26 at 11:07 -0700, Samuel Sieb wrote:
> On 5/26/20 4:15 AM, Patrick O'Callaghan wrote:
> > On Mon, 2020-05-25 at 23:22 -0500, Gabriel Ramirez wrote:
> > > On 5/25/20 5:23 PM, Patrick O'Callaghan wrote:
> > > > Yes, I understand that. I still think the behaviour of mdadm in this
> >
On Tue, 2020-05-26 at 21:48 +0530, Sreyan Chakravarty wrote:
> > I've never heard of anyone using Audacity to play audio. No doubt there
> > is a way to do that, but that isn't its function. It's an audio editor,
> > not an audio player. I'm surprised it can even play audio streams as
> > I've only
On 26 May 2020 at 22:15, Alessio wrote:
Subject:Re: USB rtl8192eu not connecting.
From: Alessio
To: Community support for Fedora users
Date sent: Tue, 26 May 2020 22:15:26 +0200
Send reply to: Community support for Fedo
On 2020-05-26 13:24, Samuel Sieb wrote:
On 5/26/20 1:18 PM, ToddAndMargo via users wrote:
I can not log out at the moment. Too many things going on.
On 2020-05-26 12:56, Samuel Sieb wrote:
The root user doesn't have permission to access your display. You
could use xhost to allow it if you w
On 5/26/20 1:18 PM, ToddAndMargo via users wrote:
I can not log out at the moment. Too many things going on.
On 2020-05-26 12:56, Samuel Sieb wrote:
The root user doesn't have permission to access your display. You
could use xhost to allow it if you want.
An example?
Try "xhost +si:local
I can not log out at the moment. Too many things going on.
On 2020-05-26 12:56, Samuel Sieb wrote:
The root user doesn't have permission to access your display. You could
use xhost to allow it if you want.
An example?
___
users mailing list -- u
On Wed, 2020-05-27 at 06:06 +1000, Michael D. Setzer II via users
wrote:
> I've tried two usb rtl8192eu devices I've used in the
> past, but now I can not get either to connect with
> Fedora 30 or Fedora 31?
>
> The devices load, and will even see the wifi, but the
> connection fails.
I've see
I've tried two usb rtl8192eu devices I've used in the
past, but now I can not get either to connect with
Fedora 30 or Fedora 31?
The devices load, and will even see the wifi, but the
connection fails.
[107115.787875] wlp0s20u2: authenticate with
d8:b6:b7:ef:20:40
[107115.796790] wlp0s20u2: se
On 5/26/20 12:47 PM, ToddAndMargo via users wrote:
Normally when I start virt-mamager, I get a root password
prompt from xfce-polkit. I accidentally pressed
"Deny". Now it won't start from a user anymore
I assume it saves that somewhere, but maybe only in memory. Have you
tried restarting t
Hi All,
Normally when I start virt-mamager, I get a root password
prompt from xfce-polkit. I accidentally pressed
"Deny". Now it won't start from a user anymore
But I can start it from a shell as user root.
But I can not use "su" or "beesu" to start it
from a user's account:
$ su root -c vi
On 5/26/20 10:19 AM, Tom Horsley wrote:
If it is a network printer you could run a windows virtual machine
and print from there (maybe USB pass-through would also work
for a direct connection).
I know I gave up long ago on a working scanner for linux
and do all my scanning (fortunately not a lot
On Tue, 26 May 2020, George N. White III wrote:
On Tue, 26 May 2020 at 04:25, Michael Hennebry <
henne...@web.cs.ndsu.nodak.edu> wrote:
On Tue, 26 May 2020, Michael Hennebry wrote:
How do I get xrandr or something else to do what I want,
i.e. change my resolution to 1440x900
when using the l
On 5/26/20 1:19 PM, Tom Horsley wrote:
If it is a network printer you could run a windows virtual machine
and print from there (maybe USB pass-through would also work
for a direct connection).
I know I gave up long ago on a working scanner for linux
and do all my scanning (fortunately not a lo
On Tue, 26 May 2020 21:28:18 +0530
Sreyan Chakravarty wrote:
> Who do I point the finger at ? Who do I blame ?
Too easy. You shouldn't float those soft pitches over the plate.
PEBKAC? :-^)
___
users mailing list -- users@lists.fedoraproject.org
To uns
On Tue, 26 May 2020 19:16:23 +0530
Sreyan Chakravarty wrote:
> On 5/24/20 11:38 PM, stan via users wrote:
> > Did you try changing the playback device as the message suggests?
> > You need to select the analog output device in order to play audio.
> >
>
> Ok I spoke too soon and there is defin
On Tue, 26 May 2020 at 14:06, Jon LaBadie wrote:
> On Tue, May 26, 2020 at 04:20:06PM +0800, Ed Greshko wrote:
> > On 2020-05-26 13:43, hw wrote:
> > > Ok, I take it that this mailing list is no more than a bad joke and
> only
> > > useful for trolls. Everything that has been said so far is enti
On 5/26/20 4:15 AM, Patrick O'Callaghan wrote:
On Mon, 2020-05-25 at 23:22 -0500, Gabriel Ramirez wrote:
On 5/25/20 5:23 PM, Patrick O'Callaghan wrote:
Yes, I understand that. I still think the behaviour of mdadm in this
case is counter-intuitive. When I explicitly ask for the creation of an
ar
On 26/05/2020 17:35, Kevin Becker wrote:
On Tue, 2020-05-26 at 21:48 +0530, Sreyan Chakravarty wrote:
I've never heard of anyone using Audacity to play audio. No doubt there
is a way to do that, but that isn't its function. It's an audio editor,
not an audio player. I'm surprised it can even pla
If it is a network printer you could run a windows virtual machine
and print from there (maybe USB pass-through would also work
for a direct connection).
I know I gave up long ago on a working scanner for linux
and do all my scanning (fortunately not a lot of it) from
my windows 10 virtual machine
On Tue, May 26, 2020 at 04:20:06PM +0800, Ed Greshko wrote:
> On 2020-05-26 13:43, hw wrote:
> > Ok, I take it that this mailing list is no more than a bad joke and only
> > useful for trolls. Everything that has been said so far is entirely
> > irrelevant and nothing new.
>
> If you were to go t
On Mon, 25 May 2020 15:11:46 -0600
"S.Bob" wrote:
> I just ordered this printer:
>
> Epson SureColor P900 17" Photo Printer
>
> Any thoughts on where I can get a driver for it to print large
> photos? Or even the driver for it's predecessor the P800?
Gutenprint lists support for the P800 as e
On Tue, 2020-05-26 at 21:48 +0530, Sreyan Chakravarty wrote:
> > I've never heard of anyone using Audacity to play audio. No doubt
> > there
> > is a way to do that, but that isn't its function. It's an audio
> > editor,
> > not an audio player. I'm surprised it can even play audio streams
> > as
>
>
> I've never heard of anyone using Audacity to play audio. No doubt there
> is a way to do that, but that isn't its function. It's an audio editor,
> not an audio player. I'm surprised it can even play audio streams as
> I've only ever used it to edit audio files.
Well you might need to play ba
On Tue, 2020-05-26 at 19:16 +0530, Sreyan Chakravarty wrote:
> On 5/24/20 11:38 PM, stan via users wrote:
> > Did you try changing the playback device as the message suggests? You
> > need to select the analog output device in order to play audio.
>
> Ok I spoke too soon and there is definitely i
Who do I point the finger at ? Who do I blame ?
On Tue, May 26, 2020 at 8:34 PM jarmo wrote:
> Tue, 26 May 2020 19:19:13 +0530
> Sreyan Chakravarty kirjoitti:
>
>
> > Also forgot to mention, that Firefox is unable to play audio when
> > Audacity is open. So its one or the other. This is the mos
On Tue, 2020-05-26 at 09:32 -0500, Roger Heflin wrote:
> If you want the name to stay the same then create a file in
>
> /etc/mdadm.conf with something like this in it:
>
> # mdadm.conf written out by anaconda
>
> MAILADDR root
>
> AUTO +imsm +1.x -all
>
>
>
> ARRAY /dev/md13 metadata=1.2 le
On Tue, 26 May 2020 at 04:25, Michael Hennebry <
henne...@web.cs.ndsu.nodak.edu> wrote:
> On Tue, 26 May 2020, Michael Hennebry wrote:
>
> > How do I get xrandr or something else to do what I want,
> > i.e. change my resolution to 1440x900
> > when using the live DVD..
>
> Note that since I using
Tue, 26 May 2020 19:19:13 +0530
Sreyan Chakravarty kirjoitti:
> Also forgot to mention, that Firefox is unable to play audio when
> Audacity is open. So its one or the other. This is the most limiting
> thing I have seen.
This could be pulseaudio issue...
Jarmo
_
If you want the name to stay the same then create a file in
/etc/mdadm.conf with something like this in it:
# mdadm.conf written out by anaconda
MAILADDR root
AUTO +imsm +1.x -all
ARRAY /dev/md13 metadata=1.2 level=raid6 num-devices=7
name=localhost.localdomain:11 UUID=a54550f7:da200f3e:90606715:0
On 5/26/20 7:16 PM, Sreyan Chakravarty wrote:
On 5/24/20 11:38 PM, stan via users wrote:
Did you try changing the playback device as the message suggests? You
need to select the analog output device in order to play audio.
Ok I spoke too soon and there is definitely is a problem and the
pr
On 5/24/20 11:38 PM, stan via users wrote:
Did you try changing the playback device as the message suggests? You
need to select the analog output device in order to play audio.
Ok I spoke too soon and there is definitely is a problem and the problem
is a really weird one.
Lets say that yo
On 5/24/20 11:38 PM, stan via users wrote:
Pretty sure it is an RPM unless you have things configured strangely.
It is good to use the rpm from RPMFusion, because then you get the
patented audio and video codecs, so audacity can play audio from videos.
Not idea. Just went to GNOME Software and s
Sent from ProtonMail, encrypted email based in Switzerland.
‐‐‐ Original Message ‐‐‐
On Tuesday, May 26, 2020 5:51 AM, Samuel Sieb wrote:
> On 5/25/20 5:40 PM, None via users wrote:
>
> > ‐‐‐ Original Message ‐‐‐
> > On Monday, May 25, 2020 7:58 PM, Samuel Sieb sam...@sieb.net
On Mon, 25 May 2020 at 14:33, hw wrote:
>
> Hi,
>
> what is the current status of wayland with nvidia drivers in Fedora 32?
>
> Some search results seem to indicate that it's supposed to work by default.
> Others indicate that it still doesn't work. The actual result is that it
> does not work u
On Mon, 2020-05-25 at 23:22 -0500, Gabriel Ramirez wrote:
> On 5/25/20 5:23 PM, Patrick O'Callaghan wrote:
> > Yes, I understand that. I still think the behaviour of mdadm in this
> > case is counter-intuitive. When I explicitly ask for the creation of an
> > array called /dev/md0 and the command f
On Mon, 2020-05-25 at 15:43 -0700, Samuel Sieb wrote:
> > That decision was taken by mdadm without input from me, i.e. it's the
> > default. I see there is an "--assume-clean" option which would possibly
> > have skipped that step, though the man page doesn't recommend it unless
> > you know what y
On 2020-05-26 13:43, hw wrote:
> Ok, I take it that this mailing list is no more than a bad joke and only
> useful for trolls. Everything that has been said so far is entirely
> irrelevant and nothing new.
If you were to go to https://www.nvidia.com/en-us/drivers/unix/ you'd seen the
versions of
On 05/25/2020 11:43 PM, hw wrote:
Ok, I take it that this mailing list is no more than a bad joke and only
useful for trolls. Everything that has been said so far is entirely
irrelevant and nothing new.
There's lots of information to be had here, but you have to give us
something to work on.
On Tue, 26 May 2020, Michael Hennebry wrote:
How do I get xrandr or something else to do what I want,
i.e. change my resolution to 1440x900
when using the live DVD..
Note that since I using a live DVD,
changing a config file and
rebooting is not really an option.
It is what I have on Centos
On Mon, 25 May 2020, Michael Hennebry wrote:
[liveuser@localhost-live proc]$ xrandr --fb 1440x900
xrandr: Failed to get size of gamma for output default
xrandr: screen cannot be larger than 640x480 (desired size 1440x900)
[liveuser@localhost-live proc]$
So I tried these commands:
xrandr --newm
On 5/25/20 10:43 PM, hw wrote:
Ok, I take it that this mailing list is no more than a bad joke and only
useful for trolls. Everything that has been said so far is entirely
irrelevant and nothing new.
If your questions aren't being answered then you need to be asking them
better. I have no id
55 matches
Mail list logo
