On Thu, 2020-02-06 at 18:36 -0400, George N. White III wrote:
> On Thu, 6 Feb 2020 at 15:04, Danishka Navin
> wrote:
> > Hi,
> >
> > I am new to eclipse and opencv and I was trying to build a sample
> > c++ code using Eclipse.
> >
> > I have installed following packages.
> > rpm -qa | grep open
On Fri, 2020-02-07 at 00:33 +0530, Danishka Navin wrote:
> Hi,
>
> I am new to eclipse and opencv and I was trying to build a sample c++
> code using Eclipse.
>
> I have installed following packages.
> rpm -qa | grep opencv
> opencv-devel-3.4.4-10.fc30.x86_64
> opencv-3.4.4-10.fc30x86_64
> openc
I had the same problem, I usually buy AMD processors, but I read about
the problem, I bought an Intel box. Still, the whole boot process
seemed to take place up, but ended in an infinite loop waiting for
startup process to end. I threw in the towel on Fedora and went to
Ubuntu. But ubuntu 19.04
On Wed, 2019-02-20 at 11:52 -0800, Samuel Sieb wrote:
> On 2/20/19 9:23 AM, Howard Howell wrote:
> > That didn't go well at all I dnf installed system-config-
> > firewall
> > and invoked it as sudo system-config-firewall:
>
> system-config-firewall is the
On Wed, 2019-02-20 at 17:58 +1030, Tim wrote:
> Allegedly, on or about 19 February 2019, Howard Howell sent:
> > I did a clean install of F28.
>
> After a new install, you may need to horse around with the firewall,
> so
> that the printer is automatically found by the syste
On Tue, 2019-02-19 at 12:55 -0800, Samuel Sieb wrote:
> On 2/19/19 12:45 PM, Howard Howell wrote:
> > addendum. Just checked. Printer is now working??? Don't know what
> > did
> > that unless it was cleaning the journalctl files. Is that in a
> > closed
> &
On Tue, 2019-02-19 at 12:20 -0800, Howard Howell wrote:
> On Tue, 2019-02-19 at 12:06 -0800, Samuel Sieb wrote:
> > On 2/19/19 10:12 AM, Howard Howell wrote:
> > > On Tue, 2019-02-19 at 09:20 -0800, Samuel Sieb wrote:
> > > > The gnome-settings prin
On Tue, 2019-02-19 at 12:06 -0800, Samuel Sieb wrote:
> On 2/19/19 10:12 AM, Howard Howell wrote:
> > On Tue, 2019-02-19 at 09:20 -0800, Samuel Sieb wrote:
> > > The gnome-settings printer panel does not show enough
> > > information.
> > > Install system-conf
On Tue, 2019-02-19 at 09:20 -0800, Samuel Sieb wrote:
> On 2/19/19 8:53 AM, Howard Howell wrote:
> > And I just went to settings-devices-printers and tried to unlock
> > and
> > look at printer details and my system logged me off for some
> > reason.
> > Another s
.
Another symptom?
Regards,
Les H
On Fri, 2019-02-15 at 16:39 -0800, Samuel Sieb wrote:
> On 2/15/19 2:11 PM, Howard Howell wrote:
> > If anyone can tell me all the locations where the printer is
> > referenced
> > and how to remove the references, I will probably be able t
Hi, guys,
My problem is exasperating... I have a canon mf624cw on my
network. It has been there for a couple of years and worked well. when I
started to work on my tax stuff, downloads etc. it refused to print. I powered
down the router and repowered it. This usually worked because I
For not repeatitive reason, Gnome is crashing. My system logs me off,
and I get the "oops Gnome crashed" message.
I am on f28 AMD Fx-8300 8 core processor
15.6GiB memory
AMD Oland
Gnome Version 3.28.2
OS type 64 bit
Up to date with the latest patches. Nothing else seems to be
happening, and it
On Thu, 2018-12-06 at 21:03 -0500, Kevin Cummings wrote:
> On 12/1/18 3:51 PM, home user via users wrote:
>
> > I'm using Thunderbird on Fedora-28; there is no "anti-virus"
> > available.
> > Is this safe?
>
> If you're using Thunderbird, then a simple control-U works
> wonders. It
> shows the e
On Wed, 2018-12-05 at 15:20 +1030, Tim wrote:
> Tim:
> > > Look in the View menu, inside the Layout section, enable the Show
> > > Status Bar item.
>
> Howard Howell:
> > It shows 4 options, all checked. What did you think I would find
> > there?
>
On Mon, 2018-12-03 at 23:12 +, Patrick O'Callaghan wrote:
> On Mon, 2018-12-03 at 10:59 -0800, Howard Howell wrote:
> > On Tue, 2018-12-04 at 00:29 +1030, Tim wrote:
> > > Allegedly, on or about 2 December 2018, Howard Howell sent:
> > > > I'm still
On Tue, 2018-12-04 at 00:29 +1030, Tim wrote:
> Allegedly, on or about 2 December 2018, Howard Howell sent:
> > I'm still using evolution in F28 and it doesn't do that. If I am
> > interested, I copy the link location and paste it into a new
> > email.
> > G
On Sun, 2018-12-02 at 09:59 +, Patrick O'Callaghan wrote:
> On Sun, 2018-12-02 at 11:05 +0800, Ed Greshko wrote:
> > On 12/2/18 10:46 AM, Sam Varshavchik wrote:
> > > I'll be happy to send you an HTML message with a link whose
> > > destination URL seems to be
> > > https://www.whitehouse.gov,
After you do the dnf install portion, you have to do the pip install in
most cases.
Regards,
Les H
On Wed, 2018-10-31 at 23:19 -0500, Ranjan Maitra wrote:
> Hi,
>
> I have been trying to run some code on F28 (in python) from the
> following site:
> https://github.com/AntiAegis/Iris-Recognition#v
On Sun, 2018-09-23 at 06:14 +0800, Ed Greshko wrote:
> On 9/23/18 5:30 AM, Howard Howell wrote:
> > Looking for an inexpensive webcam. Found this on Amazon:
> > Ausdom 335 1080P camera:
> > https://www.amazon.com/dp/B07D7SDQZL/ref=sspa_dk_detail_2?psc=1
> >
>
Hi, guys,
Looking for an inexpensive webcam. Found this on Amazon:
Ausdom 335 1080P camera:
https://www.amazon.com/dp/B07D7SDQZL/ref=sspa_dk_detail_2?psc=1
Anyone used this on Fedora?
___
users mailing list -- users@lists.fedoraproject.org
To
On Fri, 2018-07-13 at 10:08 -0400, bruce wrote:
> Hi.
>
> Trying to wrap my head around what I need to setup on a test system
> to
> be able to capture/view (in a file or via app output) the https
> traffic. My use case I have a test app talking to a remote server on
> "https" and I want to be ab
Hi everyone,
I have the following message when I select the update function
in Eclipse:
An error occurred while uninstalling
session context was:(profile=SDKProfile,
phase=org.eclipse.equinox.internal.p2.engine.phases.Uninstall,
operand=[R]org.eclipse.platform_root 4.7.2.v20171217-1438 -->
On Mon, 2018-06-25 at 03:55 +0930, Tim via users wrote:
> Allegedly, on or about 24 June 2018, JD sent:
> > Reason I am posting this is because the normal speed of the cores
> > is 2.8GHz, and that is causing numerous kerneloops interrupts
> > (overheating).
> > Fans are at full speed all the time
The guidelines quoted are also a bit dated. Modern charge controllers
do a lot of control of the battery conditions based on temperature. If
you look at your battery, you will see that there are 4 contacts. two
are the charge current and two are to a temperature sensor. The charge
controller mo
On Mon, 2018-01-01 at 13:08 -0500, Stephen Perkins wrote:
> I had the same problem with FF 57 on Fedora 26; found solution on FF
> forum:
>
> go to about:config
> and set accessibility.force_disabled = 1 (it's 0 by default)
>
> worked for me.
>
> On Mon, Jan 1, 2018 at 11:29 AM, Terry Barnaby
>
On Sun, 2017-12-31 at 09:28 +, Patrick O'Callaghan wrote:
> On Sat, 2017-12-30 at 21:34 -0800, Howard Howell wrote:
> > On Sun, 2017-12-31 at 03:25 +0800, Ed Greshko wrote:
> > > On 12/31/17 02:29, Howard Howell wrote:
> > > > I am experiencing random
On Sun, 2017-12-31 at 03:25 +0800, Ed Greshko wrote:
> On 12/31/17 02:29, Howard Howell wrote:
> > I am experiencing random logouts on my system. No apparent
> > links to any one program or sequence of events. In fact the last
> > time
> > it happened there were no w
Hi, guys,
I am experiencing random logouts on my system. No apparent
links to any one program or sequence of events. In fact the last time
it happened there were no windows open yet. I went up for the
Activities button and next thing I saw was the login window.
Memory: 15.6GiB
On Thu, 2017-10-26 at 22:38 -0400, Fred Smith wrote:
> On Thu, Oct 26, 2017 at 06:23:21PM -0700, Howard Howell wrote:
> > On Thu, 2017-10-26 at 21:41 +0200, Louis Lagendijk wrote:
> > > On Thu, 2017-10-26 at 00:14 -0700, Howard Howell wrote:
> > > > On Wed, 2017-10
On Thu, 2017-10-26 at 22:38 -0400, Fred Smith wrote:
> On Thu, Oct 26, 2017 at 06:23:21PM -0700, Howard Howell wrote:
> > On Thu, 2017-10-26 at 21:41 +0200, Louis Lagendijk wrote:
> > > On Thu, 2017-10-26 at 00:14 -0700, Howard Howell wrote:
> > > > On Wed, 2017-10
On Thu, 2017-10-26 at 21:41 +0200, Louis Lagendijk wrote:
> On Thu, 2017-10-26 at 00:14 -0700, Howard Howell wrote:
> > On Wed, 2017-10-25 at 17:51 -0400, Fred Smith wrote:
> > > On Wed, Oct 25, 2017 at 11:52:20AM -0700, Howard Howell wrote:
> > > > Hi, guys,
&g
On Wed, 2017-10-25 at 17:51 -0400, Fred Smith wrote:
> On Wed, Oct 25, 2017 at 11:52:20AM -0700, Howard Howell wrote:
> > Hi, guys,
> > I have to scan a document into my computer from a cannon mfc620
> > multifunction printer. It is wifi connected, and I have also a USB
&
Hi, guys,
I have to scan a document into my computer from a cannon mfc620
multifunction printer. It is wifi connected, and I have also a USB
connection. Xsane says no device connected and exits.
Any help? googling didn't give me anything useful.
Regards,
Les H
__
Hi, guys,
What is this file:
/sys/module/ebtable_broute/uevent
When I do "# ls -al" it shows up as:
--w---. 1 root root 4096 Oct 10 18:22 uevent
I have never seen a file with ONLY write permissions and root
ownership before. This would seem to be an error, or someth
On Wed, 2017-07-26 at 13:22 +0800, Ed Greshko wrote:
> On 07/26/2017 12:42 PM, evade. wrote:
> > Does anybody know the best way to upgrade from Fedora 25 LXDE to
> > Fedora 26 LXQt? I've not found an upgrade path documented
> > anywhere.
> >
> > I'm not concerned about leaving configuration data
On Wed, 2016-12-14 at 13:46 +0100, Patrick Dupre wrote:
> Thank very good
>
> However, there is something that I do not understand
>
> I define
> W1=0.2
> z(x) = (x + W1*{0,1})
> w(x) = faddeeva (z (x))
> and
> Voi (x) = voigt (x, W1)
>
> Voi (x) and real (w(x)) are exactly the same
> Now,
> d_w
On Sat, 2016-11-19 at 09:09 -0800, Howard Howell wrote:
> On Fri, 2016-11-18 at 19:14 -0700, jd1008 wrote:
> >
> > On 11/18/2016 05:37 PM, Howard Howell wrote:
> > >
> > > On Fri, 2016-11-18 at 13:25 -0800, Rick Stevens wrote:
> > > >
> &
Hi, everyone,
Just upgraded to f25. Wonderful once I got past a google earth
bug with help from the developers (use rpm -e to remove the misbehaving
package if you run into that issue.)
BUT, and for me it is a tough one... No mouse tails, and the
control key no longer highlights th
Hi, guys,
After googling this issue on upgrading fedora, working until
2:30 this morning, and not getting anywhere, I hope you guys can help.
I followed the guide:
https://fedoramagazine.org/upgrading-fedora-24-fedora-25/
using the gnome terminal.
things seemed to g
Never mind, found the link you posted. Read so fast I skipped it.
Thanks again...
Les H
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
Thank you so much Stan, I am sure this is what I was missing. Where
did you find this information?
Regards,
Les H
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to users-le...@lists.fedoraproject.org
On Fri, 2016-11-18 at 19:14 -0700, jd1008 wrote:
>
> On 11/18/2016 05:37 PM, Howard Howell wrote:
> >
> > On Fri, 2016-11-18 at 13:25 -0800, Rick Stevens wrote:
> > >
> > > On 11/18/2016 12:20 PM, Howard Howell wrote:
> > > >
> > &
On Fri, 2016-11-18 at 13:25 -0800, Rick Stevens wrote:
> On 11/18/2016 12:20 PM, Howard Howell wrote:
> >
> > Hi, everyone,
> > I loaded go using dnf...
> > sudo dnf install go
> >
> > I am on an AMD64 system with F24 installed.
> >
&g
Hi, everyone,
I loaded go using dnf...
sudo dnf install go
I am on an AMD64 system with F24 installed.
The issue is that the /usr/share/gocode/src/code.google.com/p
was empty. I installed the golang...devel package and it added the
go.tools directory with several
On Sun, 2016-10-02 at 10:23 -0700, stan wrote:
> On Sun, 02 Oct 2016 09:34:52 -0700
> Howard Howell wrote:
>
> >
> > Hi, everyone,
> > I use Pycam with my milling machine. The process I follow is:
> > design with OpenSCAD, export as DXF or STL for
On Sun, 2016-10-02 at 10:23 -0700, stan wrote:
> On Sun, 02 Oct 2016 09:34:52 -0700
> Howard Howell wrote:
>
> >
> > Hi, everyone,
> > I use Pycam with my milling machine. The process I follow is:
> > design with OpenSCAD, export as DXF or STL for
Hi, everyone,
I use Pycam with my milling machine. The process I follow is:
design with OpenSCAD, export as DXF or STL format.
Open with PYCAM and adjust settings for feedrate, speed, bit
size and so forth as required for the project and material. Load the
DXF or STL fil
On Tue, 2014-03-25 at 07:13 -0400, Matthew Miller wrote:
> On Mon, Mar 24, 2014 at 08:19:52PM +0100, lee wrote:
> > >> /usr belongs on it`s own partition.
> > > As if no one has ever said that before, and as if it convinced even one
> > > thinking person to change their mind.
> > Thinking perso
48 matches
Mail list logo
