On 7/4/19 4:33 AM, wwp wrote:
Hello,
On Wed, 3 Jul 2019 15:42:31 -0700 ToddAndMargo via users
wrote:
On 7/3/19 1:50 PM, Paolo Galtieri wrote:
Folks,
I recently purchased a 4TB external USB drive. I have purchased USB > drives
in the past and have run dosfslabel to set the drive labe
Hello,
On Wed, 3 Jul 2019 15:42:31 -0700 ToddAndMargo via users
wrote:
> On 7/3/19 1:50 PM, Paolo Galtieri wrote:
> > Folks,
> > I recently purchased a 4TB external USB drive. I have purchased USB >
> > drives in the past and have run dosfslabel to set the drive label. When >
> > I tried
On Wed, 2019-07-03 at 18:25 -0700, Paolo Galtieri wrote:
> Device Boot StartEndSectors Size Id Type
> /dev/sdc1 * 2048 3907029166 3907027119 1.8T 7 HPFS/NTFS/exFAT
Don't forget that when you use partitioning tools to look at a drive,
they look at the flags on the partitions
On 7/3/19 6:25 PM, Paolo Galtieri wrote:
I managed to figure that out after I sent the email. What confused me
was that for 1 and 2 TB drives fdisk -l says the drives are:
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 2048 3907029166 3907027119 1.8T 7 HPFS/NTFS/e
On 7/3/19 6:25 PM, Paolo Galtieri wrote:
I managed to figure that out after I sent the email. What confused me
was that for 1 and 2 TB drives fdisk -l says the drives are:
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 2048 3907029166 3907027119 1.8T 7 HPFS/NTFS/e
I managed to figure that out after I sent the email. What confused me
was that for 1 and 2 TB drives fdisk -l says the drives are:
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 2048 3907029166 3907027119 1.8T 7 HPFS/NTFS/exFAT
for 4 and 8 TB drives dfisk -l shows
On 7/3/19 1:50 PM, Paolo Galtieri wrote:
I recently purchased a 4TB external USB drive. I have purchased USB
drives in the past and have run dosfslabel to set the drive label. When
I tried this on F29 I get the following:
dosfslabel /dev/sdc2 NEW_LABEL
Currently, only 1 or 2 FATs are supp
On 7/3/19 1:50 PM, Paolo Galtieri wrote:
Folks,
I recently purchased a 4TB external USB drive. I have purchased USB
drives in the past and have run dosfslabel to set the drive label. When
I tried this on F29 I get the following:
dosfslabel /dev/sdc2 NEW_LABEL
Currently, only 1 or 2 FATs
Folks,
I recently purchased a 4TB external USB drive. I have purchased USB
drives in the past and have run dosfslabel to set the drive label. When
I tried this on F29 I get the following:
dosfslabel /dev/sdc2 NEW_LABEL
Currently, only 1 or 2 FATs are supported, not 0.
I have 2 8TB drives
On 04/15/2013 03:47 AM, Heinz Diehl wrote:
On 15.04.2013, Paul Erickson wrote:
I have a couple of external disks that I formatted in XFS using F11, I think
for data backup. Now with a new F 18 installation, when I plug
in the drive, the disk icons appear on the desktop, but when I try to access
On 15.04.2013, Paul Erickson wrote:
> I have a couple of external disks that I formatted in XFS using F11, I think
> for data backup. Now with a new F 18 installation, when I plug
> in the drive, the disk icons appear on the desktop, but when I try to access
> them, I get an error message stating
Hi
In case it will not solve the problem,can you please send the output of
dmesg after you get the error you mentioned?
Regards
Rami Rosen
On Apr 15, 2013 1:51 AM, "Paul Erickson" wrote:
> On 04/14/2013 03:21 PM, Ed Greshko wrote:
>
>> On 04/15/13 05:33, Paul Erickson wrote:
>>
>>> I have a coup
On 04/14/2013 03:21 PM, Ed Greshko wrote:
On 04/15/13 05:33, Paul Erickson wrote:
I have a couple of external disks that I formatted in XFS using F11, I think
for data backup. Now with a new F 18 installation, when I plug
in the drive, the disk icons appear on the desktop, but when I try to acc
On 04/15/13 05:33, Paul Erickson wrote:
> I have a couple of external disks that I formatted in XFS using F11, I think
> for data backup. Now with a new F 18 installation, when I plug
> in the drive, the disk icons appear on the desktop, but when I try to access
> them, I get an error message sta
I have a couple of external disks that I formatted in XFS using F11, I
think for data backup. Now with a new F 18 installation, when I plug
in the drive, the disk icons appear on the desktop, but when I try to
access them, I get an error message stating that the contents cannot be
displayed due
>> > On Wed, 2010-01-13 at 16:46 +, Jonathan Allen wrote:
>>> >> Hi All,
>>> >>
>>> >> I'd like to buy a 1.5Tb (or so) external USB disc drive to use for
>>> >> backup
>>> >> from my main file server. ?Most of the ones I see around seem to say
>>> >> that
>>> >> they want Wondiws somethi
On Thu, Jan 14, 2010 at 4:36 AM, Patrick O'Callaghan
wrote:
> On Wed, 2010-01-13 at 16:46 +, Jonathan Allen wrote:
>> Hi All,
>>
>> I'd like to buy a 1.5Tb (or so) external USB disc drive to use for backup
>> from my main file server. Most of the ones I see around seem to say that
>> they wan
> On Wed, 2010-01-13 at 16:46 +, Jonathan Allen wrote:
>> I'd like to buy a 1.5Tb (or so) external USB disc drive to use for backup
>> from my main file server. Most of the ones I see around seem to say that
>> they want Wondiws something - is that necessary or meaningful? Should I
>> just be
On Wed, 2010-01-13 at 16:46 +, Jonathan Allen wrote:
> Hi All,
>
> I'd like to buy a 1.5Tb (or so) external USB disc drive to use for backup
> from my main file server. Most of the ones I see around seem to say that
> they want Wondiws something - is that necessary or meaningful? Should I
>
I have a Seagate 1.5Tb drive and it works just fine with Linux. I use it to
back up my Windows 7 system (when I boot up in Windows 7) and my Linux when
I boot up in Linux (Fedora 12).
Paolo
On Wed, Jan 13, 2010 at 9:46 AM, Jonathan Allen wrote:
> Hi All,
>
> I'd like to buy a 1.5Tb (or so) ext
Hi All,
I'd like to buy a 1.5Tb (or so) external USB disc drive to use for backup
from my main file server. Most of the ones I see around seem to say that
they want Wondiws something - is that necessary or meaningful? Should I
just be able to plug it in and use it? Do I need to partition and fo
21 matches
Mail list logo