Thanks for your support :)
On Wed, Oct 21, 2009 at 9:36 AM, Krunal Patel wrote:
> Hello,
>
> I have upgraded media-proxy to 2.3.8 .
> Now I do not face this issue again.
>
>
>
> On Fri, Oct 16, 2009 at 8:07 PM, Dan Pascu wrote:
>
>>
>> On 13 Oct 2009, at 08:09, Krunal Patel wrote:
>>
>> > Hello
Hello,
I have upgraded media-proxy to 2.3.8 .
Now I do not face this issue again.
On Fri, Oct 16, 2009 at 8:07 PM, Dan Pascu wrote:
>
> On 13 Oct 2009, at 08:09, Krunal Patel wrote:
>
> > Hello
> >
> > I am using OpenSIPS with mediaproxy.
> > OpenSIPS version is 1.5.3
> > Mediaproxy version is
Alex,
Thanks for your help. Works great now.
To answer my own question, it's possible to RTPProxy all calls.
Julian
On 10/18/09, Alex Balashov wrote:
> Julian Yap wrote:
>
>> Hmm, so in theory RTPProxy should work in my case?
>>
>> I just need to check the SDP? My NAT section has something
Mani,
There is a complete working configuration posted at the following blog link:
http://voiprookie.blogspot.com/2009/04/rtpproxy-12x-installation.html
You might need to tuneup a little bit based on your needs but last time i
have tried it and it was functional.
--
Khan
VoIP Rookie
Every be
Try escaping the : as well. They have special meaning in regex.
Ariadne Ramos wrote:
> Hello
>
>
>
> I’m trying to modify the contact header in onreply route
>
>
>
> I’m using
>
>
>
> if(subst('/^Contact:(.*)@proxy.yy.com/Contact:\...@proxy.xx.com/')) {
>
>xlog("L_INFO", "SU
Dear Pros
The nathelper documentation is good as shown below
http://www.opensips.org/html/docs/modules/1.5.x/nathelper.html#id228280
Seems like from 1.5.x many nathelper functions are deprecated and new
functions are introduced like rtpproxy_offer and rtpproxy_answer.
Actually NAT traversal is s
Hi
"but I modified the cfgutils. Now I can write $time(msec) and I receive
the millisecs..."
Can you please explain how did you do that?
Thank you
Ernest
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bi
Hi Larry,
Check your subscribers table. Your users were created with the right domain?. What domain is in the opensserctlrc (The default domain to create users).
You may create users for an specific domain using openserctl add 1...@domain 1000.
Follow the book step by step, do the labs in the
Hi Anca,
Thanks for your reply.
I found the mistake - I didn't set presence mode to Presence Agent in my xlite.
Thanks
Regards,
JR
> Date: Wed, 14 Oct 2009 14:51:57 -0700
> From: a...@opensips.org
> To: users@lists.opensips.org
> Subject: Re: [OpenSIPS-Users] Presence: no record in Presenti
Jeff,
in domain is not your ip , but the callee IP ("64.111.17.11" ) ! if not
the case, please enable full debug (set debug=6) and then make a call
and send me the output
Regards,
Bogdan
Jeff Kronlage wrote:
> Bogdan,
>
> The pertinent part of my config file contains this snippet:
>
> $var
Hi Uwe,
Uwe Kastens wrote:
> Hi Bogdan,
>
>
>> So actually both legs do send 200 OK (but one faster than the
>> other)..so there is kind on race between the 200 OK from the slow
>> branch and the CANCEL from OpenSIPS...is this the case?
>>
>
> Exactly
>
>
>> If so, the UAS will si
Hi Bogdan,
> So actually both legs do send 200 OK (but one faster than the
> other)..so there is kind on race between the 200 OK from the slow
> branch and the CANCEL from OpenSIPS...is this the case?
Exactly
>
> If so, the UAS will simply reply with negative reply to CANCEL (decline
> i
Thanks for the feed back guys!
On Mon, Oct 19, 2009 at 11:28 PM, Bogdan-Andrei Iancu
wrote:
> Hi AG,
>
> To shortly answer you : yes, OpenSIPS is more then suitable for
> you...and OpenSIPS is very good SIP router.
>
> You have module do dynamically control the DID based routing between the
> S
Bogdan,
The pertinent part of my config file contains this snippet:
$var(ruriuser) = $rU;
if (has_totag()) {
xlog("DEBUG1 ru is $ru, du is $du");
if (loose_route()) {
xlog("DEBUG2 ru is $ru, du is $du");
$rU = $var(ruriuser); #Hack job
Hi Uwe,
So actually both legs do send 200 OK (but one faster than the
other)..so there is kind on race between the 200 OK from the slow
branch and the CANCEL from OpenSIPS...is this the case?
If so, the UAS will simply reply with negative reply to CANCEL (decline
it) and opensips (for INVI
HI Jeff,
Just a wild guess - looking at the RURI and ROUTE hdrs, I would say your
opensips is doing strict routing and not loose routing - this may happen
when the IP in RURI is recognized as local SIP domain
So, have you added "64.111.17.11" IP as alias in script or in domain
table ? if s
Hi Sanjeev,
Insertion in watchers tables occurs when an initial SUBSCRIBE message is
received for a presentity - watcher pair . Another case when the watcher
table might be updated is when an authorization rule changes - for
example A authorizes B and B had previously subscribed to A. Then the
HI Alex,
You are right - the aaa_radius module (the RADIUS backend) will
automatically extract all the SIP-AVPs it founds in all received RADIUS
replies.so this will work for all RADIUS queries you do,
disregarding the module that triggered the radius call.
Regards,
Bogdan
Alex Massover w
Hello again,
I was wondering if there might be a bug with the correct handling of
Cancel in case of receiving and final answer.
I will fork one Call to 2 nodes. One node answers a little faster than
the other and will get the call. Opensips will send a CANCEL for the
other node which is sending a
As far as I understand the answer is yes, because auth_aaa actually uses
aaa_radius via generic AAA API.
--
Best Regards,
Alex Massover
VoIP R&D TL
Jajah Inc.
From: users-boun...@lists.opensips.org
[mailto:users-boun...@lists.opensips.org] On Behalf Of Alex Massover
Sent: Tuesday, October 20, 20
Hi Indiver,
It is simple - for each rule you can define a script route (by name) to
be triggered (executed) when the rule matches.
Regards,
Bogdan
Indiver wrote:
> Hi Everyone,
>
> I tried the dynamic routing with all types of scenarios(Prefix
> based,caller,timer,Priority based routing), Which
Hi Sanjeev,
It seems that you did not load the module that adds 'xcap-diff' event -
it is 'presence_xcapdiff' modules/
Regards,
Anca
Sanjeev BA wrote:
>
> Hi,
>
> I am able to add a new contact into DB using openxcap. OpenXCAP send a
> MI/PUBLISH event to opensips.
>
> However, opensips shows
Hi!
Does the radius_send_auth(input_set_name,output_set_name) automaticly parse
SIP-AVPs like functions from auth_aaa module do?
If yes, should I mention SIP-AVP in the "output_set_name"?
Also it could be multiple SIP-AVP in single response.
--
Best Regards,
Alex Massover
VoIP R&D TL
Jajah Inc
I believe check_address() is that function. With the newer versions of 1.6
you can load the subnets (including masks) into the address table. That's
exactly what I'm doing with it... now that it doesn't crash the process. :)
- Jeff
On 10/20/09 10:30 AM, "Brett Nemeroff" wrote:
> I think t
I think the dialplan module can help out here as well. Not so much for
the replacement, but if a pattern match is detected.
now that I think of it, isn't there a way in the permissions module to
check subnets? I bet you could use one of the funcs in there, like
check_address() to test if an addres
I don't understand what you mean by this.. can you provide a reference
if it's a question to something documented?
Thanks,
Brett
On Tue, Oct 20, 2009 at 7:21 AM, Indiver wrote:
>
> Hi Everyone,
>
> I tried the dynamic routing with all types of scenarios(Prefix
> based,caller,timer,Priority base
Hi Everyone,
I tried the dynamic routing with all types of scenarios(Prefix
based,caller,timer,Priority based routing), Which works fine .But i'm little
bit confused on script route triggering of dynamic routing module. I had
found no proper documentation regarding this. Can any on explain what i
El Martes, 20 de Octubre de 2009, Sanjeev BA escribió:
> Hi,
>
>
>
> What watcher A adds presentity B to his contact list using OpenXCAP, how is
> the watchers/active_watchers table updated?
>
> I assume that once the B is added to the the xcap entry for A, the xcap
> server would send a refres
Hi
"but I modified the cfgutils. Now I can write $time(msec) and I receive
the millisecs..."
Can you please explain how did you do that?
Thank you
Ernest
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/l
Ernest Mavrel pravi:
Hi
"but I modified the cfgutils. Now I can write $time(msec) and I receive
the millisecs..."
Can you please explain how did you do that?
Thank you
Ernest
--
Ernest Mavrel
technical support
Novatel d.o.o.
informacijske tehnologije
Mari
30 matches
Mail list logo