Hi Brett,
I think I'm going to go with the rejecting u...@domain in the username
section of the auth. To try rewrite things, and then hope it doesn't
break any RFC3261 compliancies, and then have it break my billing
system, its just too much that can go wrong - rejection is simple, you
either
You know, probably the best thing to do would be to rewrite the URI
using a transformation.. I included it in a previous post... it's
something like $(Au{uri.user}) or something like that.. then use that
for the billing record..
I'm trying to think if this would cause any trouble for a multidomain
Hi Brett,
I haven't made any changes, as the changes I made last night with
Vallimamod, I had to quickly undo as I lost a few asterisk registrations ;-)
IP 1.2.3.4 is the client
IP 5.6.7.8 is the server
Here is a registration from Asterisk server - it is successful:
U 1.2.3.4:5060 -> 5.6.7.8:50
I didn't see the new problem posted. Maybe I missed it? :)
> Now when I try the same with an Xlite or a Siemens A580IP (those are the
> only 2 devices I have tried so far), the only difference between the
> asterisk registration and the xlite is the From header and To header in
> the asterisk regi
Hi Vallimamod,
Ok I tried what you suggested, and things worked nicely, barring the odd
Asterisk server on our network that funny enough registers with the
domain in the username, yet when I view the account in the location
table, the username column only contains the username, and the domain
Hi Brett,
Thanks for reply.
I want to install CDRTool for accounting.
so, i want to installation or configuration guide/document/tutorial for
CDRTool.
--
Best Regards,
Rajnikant
On Thu, Apr 8, 2010 at 7:31 PM, Brett Nemeroff wrote:
> You'll need to be a little more specific on what issues y
Hi Dan,
The clean way would seem to be to have different selection algorithms in
the dispatcher that can be chosen through modparam and/or an avp. Maybe
the time and motivation will become available at some point :-)
Our situation is this:
- we don't know to which datacenter a UA will send its
Hi Douglas,
On Thursday8Apr, 2010, at 11:01 PM, Douglas Lane wrote:
> would you advise that I change the password_column to point to the
> hash
> column instead?
Definitely !
For you, both password_column and password_column_2 should point to
the ha1 column.
Good luck ;-)
- vma
.
Hi Vallimamod,
ok I checked the hashes, and they're correct - the concern is my
modparam of password_column points to the cleartext password and not the
hash.
would you advise that I change the password_column to point to the hash
column instead?
Thanks
Doug
On 2010/04/08 10:01 PM, vallimamo
Following my previous answer,
On Thursday 8 Apr, 2010, at 9:49 PM, vallimamod abdullah wrote:
> Maybe you can check if the password hash stored in db is correct:
> compare the actual value of the db stored hash with the result of
> the following shell command:
>
> $ printf 'u...@domain
On Thursday 8 Apr, 2010, at 9:31 PM, Douglas Lane wrote:
> Hi Vallimamod,
>
> H catch 22 - turning calculate_ha1 off (0) destroys all my
> authentication - no one can register when its off - the good side is
> it
> stops the @domain part in the username too ;-)
>
> Have I done something wro
Hi Vallimamod,
H catch 22 - turning calculate_ha1 off (0) destroys all my
authentication - no one can register when its off - the good side is it
stops the @domain part in the username too ;-)
Have I done something wrong that is causing this?
Thanks
Doug
On 2010/04/08 8:48 PM, vallimamod
Hi Douglas,
On Thursday 8 Apr, 2010, at 7:38 PM, Douglas Lane wrote:
> Hey Brett and Richard,
>
> I was holding thumbs for this one, but it appears to not have made a
> difference:
>
> loadmodule "auth_db.so"
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "pa
Hey all;
So I worked out what was going on with my previous test, where the failover
route wasn't being called - as Bogdan pointed out, it was a TCP failure,
because I was /sbin/route rejecting. If I actually simulated a failure on
the destination server OpenSIPS' fr_timer caught it and it was pus
Hey Brett and Richard,
I was holding thumbs for this one, but it appears to not have made a
difference:
loadmodule "auth_db.so"
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "password_column_2", "password")
modparam("auth_db",
"
That's actually a really good point:
http://www.opensips.org/html/docs/modules/1.6.x/auth_db.html#id228115
"As described in the previous section this parameter contains name of
column holding pre-calculated HA1 string that were calculated
including the domain in the username. This parameter is use
On Wed, Apr 7, 2010 at 2:06 AM, Anca Vamanu wrote:
> Hi James,
>
> What you see happens because of a improvement that I made in
> pua_dialoginfo module. Now the presentity_uri for the callee ( the uri
> that will be used as RURI in Publish message) is taken from RURI of
> Invite in the moment you
You'll need to be a little more specific on what issues you are having
if you expect to get some help!
-Brett
On Thu, Apr 8, 2010 at 3:47 AM, RAJNIKANT VANZA wrote:
> Hi Friends,
>
> I want to use CDRTool.
> so, please let me know about configuration or installation steps for CDRTool
> on centos
I think if you don't populate the ha1b column in the subscriber table it would
also solve this problem by not passing the auth check. Depending on how you
populate the table this may be done outside your control in which case you
could use the password_column_2 modparam and set it to a column l
Hi Leon,
You seem to have a problem with the jdbc connector. Try installing it again.
Check your db connection data in the file context.xml in the conf directory.
Make sure that the tomcat server is really not loaded before restarting.
Sometimes Tomcat stay in the memory for a a few minutes even a
Hi Friends,
I want to use CDRTool.
so, please let me know about configuration or installation steps for CDRTool
on centos-5.X os.
I have followed this link for CDRTool configuration
http://cdrtool.ag-projects.com/wiki/Install
but not success and confused.
I have installed opensips successful. so
21 matches
Mail list logo