Re: [OpenSIPS-Users] intermittent one-way audio

Hi, Can you track the call with one-way audio. That could be a big deal if there are alot of servers in your asterisk farm. If you can trace which asterisk server it happens and verify its sip settings "externip" - also "rtp set debug on" for a brief time interval can tell you the story. Yes router

[OpenSIPS-Users] I can't install the menuconfig

Hi all: I installed the 1.8.0version after discompress the tarball ,and follow these step: apt-get install mysql-server apt-get install gcc bison flex make sed tar build-essential libtool libmysqlclient-dev cd /usr/src/opensips-1.8.0-beta-tls make all include_modules="db_mysql"

[OpenSIPS-Users] intermittent one-way audio

We are using Opensips as a load balancer/dispatcher for Asterisk servers. All these servers are in a DMZ and have public IPs. SIP traffic goes thru Opensips, but RTP is between Asterisk servers and UACs. All the UACs are behind NAT, and there are two kinds based on nat_uac_test (in our case se

[OpenSIPS-Users] Problem NAT RTPproxy

I have phones (some behind NAT) connecting to Opensips server an Asterisk and an rtpproxy as seen below: rtpproxy started with ps -aux | grep rtpproxy root 15666  0.0  0.0  14472   920 ?    Ssl  Mar23   0:05 ./rtpproxy -F -l 189.254.2.19 -s udp:* 7890 -d

Re: [OpenSIPS-Users] MediaProxy – reINVITE with SDP in 200 OK – ACK causes problem

Hi, We solved this problem with a workaround, (avoiding 0.0.0.0 hold), now we use a valid IP and a=inactive. If anyone is going to look further on this, here is what I think happened: Call is started on hold with c=0.0.0.0 Media is received even though call is on hold, MediaProxy saves this port

Re: [OpenSIPS-Users] Opensips as load balancer for Freeswitch

Hello Miha, More or less the best indicative for the load on opensips is the CPS. But what kind of traffic you want to balance ? calls ? registrations? ? Regards, Bogdan On 03/28/2012 04:12 PM, Miha wrote: Hi, we are implementing opensips as loadbalancar between FS server. As I am doi

Re: [OpenSIPS-Users] B2B issue with UPDATE message

Hi Duane, I uploaded this patch on the SVN trunk, but I will wait a bit before backporting - just to see if there are any side effects - what I'm concerned a bit is the handling of UPDATE request in early state. Any idea if you could test this case also ? (UPDATES from callee side of b2b, whi

Re: [OpenSIPS-Users] B2B issue with UPDATE message

SUCCESS!!! You rock. Thanks When will this go into affect on the trunk? # U 2012/03/28 12:21:21.571998 64.136.174.30:5060 -> 173.XXX.XXX.88:5060 UPDATE sip:173.XXX.XXX.88:5060 SIP/2.0. Via: SIP/2.0/UDP 64.136.174.30:5060;branch=z9hG4bK2sansay155968379rdb15277. To: "9016XX6XX4" ;tag=38c6d6bcece

Re: [OpenSIPS-Users] problem with opensips 1.4

Hi, I am very new to OpenSIPS, just started evaluating it for the past 3-4 days. I think the logs are quite detailed and often answer most questions. Like in your case look at the ERROR lines. You should see if your script is loading mi_fifo and also be sure to set the relevant module parameter.

[OpenSIPS-Users] Opensips as load balancer for Freeswitch

Hi, we are implementing opensips as loadbalancar between FS server. As I am doing this for the first time I have one question. How does Opensips preform in load way? Do I need I strong server? We are having 1 registered users. What would you suggest to use? Thank you very much! Regards

[OpenSIPS-Users] problem with opensips 1.4

hello, I had opensips installed and was working properly. But after some days now its not working. I got following error with db ul show and moni. Last week it was working and I dint change anything. sip@ubuntu:~$ sudo opensipsctl start database engine 'MYSQL' loaded Control engine 'FIFO' loaded I

Re: [OpenSIPS-Users] B2Blogic, 200 OK issues

I deleted issue because I think so. :-) -- Nick 2012/3/28 Bogdan-Andrei Iancu : > Oh, I see - this is not a bug in b2b, it is more a scripting issue. > > Regards, > Bogdan > > > On 03/28/2012 01:38 PM, Nick wrote: >> >>     A        B2B        B >> 1. ->  ->  INVITE >> 2.<---

Re: [OpenSIPS-Users] B2Blogic, 200 OK issues

Oh, I see - this is not a bug in b2b, it is more a scripting issue. Regards, Bogdan On 03/28/2012 01:38 PM, Nick wrote: AB2BB 1. -> -> INVITE 2.<<- Trying/Ringing 3.<<- 200 OK 4. -> -> ACK "A" has external

Re: [OpenSIPS-Users] B2Blogic, 200 OK issues

AB2BB 1. -> -> INVITE 2. < <- Trying/Ringing 3. < <- 200 OK 4. -> -> ACK "A" has external ip-address. "B" is behind the NAT. In 200 OK "B" sends its local contact, like "192.168.0.1". So, B2B sends ACK from itse

Re: [OpenSIPS-Users] B2Blogic, 200 OK issues

I don't know exactly, it is bug or it is not bug. I solved the problem this way (in global on_reply route): onreply_route { if ([here i filter only b2b replies]) { if (nat_uac_test("1")) fix_nated_contact(); if ( (!search("^Content-Length:[ ]*0")) && (nat_uac_test("8")) ) fix_n

Re: [OpenSIPS-Users] B2B issue with UPDATE message

Hi Duane, Could you tried the attached patch please . Thanks and regards, Bogdan On 03/27/2012 07:26 PM, duane.lar...@gmail.com wrote: Just wondering if there is an update on the UPDATE On , duane.lar...@gmail.com wrote: > Thanks for looking at this. > > > > > On , Bogdan-Andrei Iancu bog.

Re: [OpenSIPS-Users] Fwd: Crach Opensips in failure d_routing after 50X response

Thanks you very much, I will try this svn, and come back to you if it doesn't work. bye > Hi, > > This is an old bug (in ACC module) which was actually never backported > to 1.6 (as it is a bit old release;)) - I just made the backport on 1.6 > branch, so updating from SVN should solve your prob

Re: [OpenSIPS-Users] B2Blogic, 200 OK issues

Hi Nick, I noticed you closed you bug report in this - was you original report invalid or ? Regards, Bogdan On 03/27/2012 07:38 AM, Nick wrote: B2Blogic module changes Contact header in INVITE and other SIP requests, but doesn't change it in 200 OK reply. The result is ACK from UAC goes to h

Re: [OpenSIPS-Users] hi guys, Ihave good question:how can I enable XMPP module?

Hi, Have you read the module documentation ? Regards, Bogdan On 03/27/2012 12:29 PM, songzhiyang wrote: > as the Makefile show, xmpp module is excluded when make install by > default. > I use this command to make install opensips.1.7.2-tls > root@ubuntu:/usr/src/opensips-1.7.2-tls >

Re: [OpenSIPS-Users] [NEW] Dynamic Routing enhancements in OpenSIPS 1.8.0

Hi Ali, Both modules are routing engines - the DR module routes based on dialled prefix, while the LB routes based on the load of the destinations (active calls). Regards, Bogdan On 03/27/2012 07:36 PM, Ali Pey wrote: What are the differences between the Dynamic Routing and Load-Balancer

Re: [OpenSIPS-Users] Fwd: Crach Opensips in failure d_routing after 50X response

Hi, This is an old bug (in ACC module) which was actually never backported to 1.6 (as it is a bit old release;)) - I just made the backport on 1.6 branch, so updating from SVN should solve your problem. Regards, Bogdan On 03/28/2012 11:27 AM, mick...@winlux.fr wrote: Sorry, my version is:

Re: [OpenSIPS-Users] compile opensips with debugging symbols

Hi, when using "[g]make", opensips is all the time compiled in with the debug symbols, by default. Only when generating packages (like debs), the debug symbols are stripped. Regards, Bogdan On 03/28/2012 11:39 AM, mick...@winlux.fr wrote: Hi, can you explain me to compile opensips with debu

Re: [OpenSIPS-Users] using Oracle with Opensips

Thank you I have already downloading db_oracle module and I have changed the opensipsctlrc like this: SIP_DOMAIN=opensips.org DBENGINE=ORACLE DBHOST=localhost DBNAME=opensips DBRWUSER=opensips DBRWPW="opensipsrw" DBROUSER=opensipsro DBROPW=opensipsro DBROOTUSER="root" USERCOL="username" but

Re: [OpenSIPS-Users] using Oracle with Opensips

Hello, Just load the db_oracle [1] module, and then for the modules that need a database connection do modparam("module","db_url","oracle://user:pass@hostname/dbname") [1] http://www.opensips.org/html/docs/modules/1.8.x/db_oracle.html Regards, Vlad Paiu OpenSIPS Developer http://www.open

[OpenSIPS-Users] using Oracle with Opensips

Hi I want to configure opensips to use Oracle data base..Can any one help me ( a link of a detailed tutoriel is a good idea)...thank you :) ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users

[OpenSIPS-Users] compile opensips with debugging symbols

Hi, can you explain me to compile opensips with debugging symbols ? I want to be sure doing the good copilation. gmake mode=debug all ? thanks ___ Users mailing list Users@lists.opensips.org http://lists.opensips.org/cgi-bin/mailman/listinfo/users

Re: [OpenSIPS-Users] Fwd: Crach Opensips in failure d_routing after 50X response

Sorry, my version is: opensips -V version: opensips 1.6.4-2-tls (i386/freebsd) flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZ

Re: [OpenSIPS-Users] Fwd: Crach Opensips in failure d_routing after 50X response

Hi all, Can you help me for this issue please? My two proxy crash randomly. I use opensips 1.6 rev 8201 on both proxies. wath do you mean this ? *(gdb) bt full* *#0 0x28a792f6 in pre_print_uac_request (t=0x292020b8, branch=1, request=0x28aa9f00) at t_fwd.c:176* * * *backup_route_type = Var