Hi, this article below, gives example for realtime rating for international
destination.
https://blog.opensips.org/2020/04/07/real-time-rating-and-cost-based-routing-in-opensips-3-1/
Is there an article for configuring NPANXX, with INTER, INTRA,
INDETERMINATE rates available?
Hi, this article below, gives example for realtime rating for international
destination.
https://blog.opensips.org/2020/04/07/real-time-rating-and-cost-based-routing-in-opensips-3-1/
Is there an article for configuring NPANXX, with INTER, INTRA,
INDETERMINATE rates available?
If you rotate before moving or renaming you might have an issue.
On Fri, Oct 2, 2020, 10:48 PM Saint Michael, wrote:
> But I move the file to another box, via an NFS mount.
> That's why my approach is better. I build a list of files, rotate, and
> then move the files across the Internet.
>
>
>
Helo,
Can anyone help me know why opensips crashing? The last core dump backtrace
is as follows...
#0 0x7f6cc4be5786 in shm_str_dup (src=0x7f6d78ed64d8, dst=) at ../../ut.h:736
No locals.
#1 dlg_clone_callee_leg (dlg=dlg@entry=0x7f6d72b45050,
cloned_leg_idx=cloned_leg_idx@entry=6) at
Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 8/27/20 11:21 AM, Vic Jolin wrote:
> > Yes we rotate it via cron. And each process creates a different
> > flatstore file.
> >
> > Is it relative to traffic
ate command
> 3. process the CDR file
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 8/27/20 11:21 AM, Vic Jolin wrote:
> > Yes we rotate it via cron. And each process creates a different
> > flatst
Hello,
Kindly help me to debug, I was trying to do restart persistence on restart
but when I start opensips it crashes and from the core file there is
something like this
Program terminated with signal 11, Segmentation fault.
#0 0x0054188e in hp_init_rpm_statistics (hpb=0x55053228)
Occassionally I come across an issue when I run the flatstore rotate
command, it gets stuck. The command is running for a long time about 10
mins. And no new flatstore files created. Just to mention I follow the
instructions on how to rotate flatstore files. Its working most of the time
but it
Thanks for your reply., I've always wanted to work on the new module, but I
cant seem to make it work properly. Can you point me in the right direction?
Thank you
On Fri, Aug 28, 2020 at 2:58 AM Liviu Chircu wrote:
> On 27.08.2020 21:45, Vic Jolin wrote:
> > shell_exec("/usr/loca
Hello,
I have an outside PHP script that reads the dialog calls and when I try to
end a dialog using the dialog id
shell_exec("/usr/local/bin/opensips-cli -x mi dlg_end_dlg 83719145016");
it just get stuck in the process
___
Users mailing list
tation process.
> Are you dumping all CDRs in a single file, or each process has its own
> file?
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 8/27/20 11:01 AM, Vic Jolin wrote:
> > Hi Razvan,
> &g
t whether there are no CDR files generated,
> or you're just missing some of them. Could you please clarify?
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 8/7/20 9:50 AM, Vic Jolin wrote:
> > I still need to cla
.
>
> However, you can still check your permissions for "/var/log/acc". Or, jist
> temporary use "/tmp" path to make sure this is not a permission problem.
>
> On Thu, Aug 6, 2020 at 2:14 PM Vic Jolin wrote:
>
>> Staz,
>>
>> Hi than
t 1:39 AM Stas Kobzar wrote:
> Hello,
>
> You should create the file with headers. You can copy required storage
> file from here:
> https://github.com/OpenSIPS/opensips/tree/master/scripts/dbtext/opensips
>
> And, of course, make sure you have good owner and permissions se
Hello,
What are the reasons why flatstore files are not being created?
Im seeing this output in a binary journal file, and not from a normal log
file I have my output logs in /var/log/messages (but we do not see it
coming here as well)
ACC: call ended:
Hello,
What are the reasons why flatstore files are not being created?
Im seeing this output in a binary journal file, and not from a normal log
file I have my output logs in /var/log/messages (but we do not see it
coming here as well)
ACC: call ended:
Hi,
So I have a LRN number from a lrn dipping service and so I set
$rU = $avp(reply);
and then I have
if ( !do_routing(1,"F",,,$var(gw_attributes)) ) {
my question is, the LRN number is being dialed instead of the orig dialed
number, is it proper to just get the routing rules and carriers
Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 7/2/20 7:13 PM, Vic Jolin wrote:
> > Hello,
> >
> > I have this for drouting
> > loadmodule "drouting.so"
> > modparam("drouting", "rule_prefix_a
Hi,
Are there other ways of "changing" callerids for a certain call aside from
uac_replace_from?
And what is the correct way of doing this?
I have uac_replace_from("$avp(650)", "");
I find it giving errors when I try to update the uri with
sip:$avp(650)@ipadddress:poprt
ng().
>
> [1] https://opensips.org/docs/modules/3.1.x/acc.html#ACC-extra-id
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 7/2/20 7:13 PM, Vic Jolin wrote:
> > Hello,
> >
> > I have this fo
Hello,
I have this for drouting
loadmodule "drouting.so"
modparam("drouting", "rule_prefix_avp", '$avp(dr_prefix)')
modparam("drouting", "carrier_id_avp", '$avp(carrier_id)')
modparam("drouting", "gw_id_avp", '$avp(gw_id)')
modparam("drouting", "ruri_avp", '$avp(dr_ruri)')
modparam("drouting",
.
>
> [1] https://opensips.org/docs/modules/3.1.x/acc.html#param_extra_fields
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 7/1/20 7:33 AM, Vic Jolin wrote:
> > Hi,
> >
> > I was trying to put the carrier id in th
details.
>
> [1] https://opensips.org/docs/modules/3.1.x/acc.html#param_extra_fields
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 7/1/20 7:33 AM, Vic Jolin wrote:
> > Hi,
> >
> > I was trying to put the carrier id in
Hi,
I was trying to put the carrier id in the acc extra fields but Im getting
Jul 1 04:00:16 Opensip opensips: #011$acc_extra(carrierid) =
$avp(carrier_id);
Jul 1 04:00:16 Opensip opensips: #011^~
Jul 1 04:00:16 Opensip opensips:
Jul 1 04:00:16 Opensip opensips:
Hi,
So I have this in my opensips.cfg
if ( !do_routing($(avp(drgID){s.int}),$var(gw_attributes)) ) {
send_reply(404,"No Route found");
exit;
}
And I know that do_routing will match on the longer prefix on dr_rules
table first.
My question is
Now after failing on all the routes, can we
) generated during the reload
> attempt.
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
> https://www.opensips-solutions.com
>
> On 6/17/20 10:01 PM, Vic Jolin wrote:
>
> Bogdan,
>
> Hi, the dialplan loads properly on start up, it
Hi,
So I have this dialplan with attributes on it, and then I decided to remove
those attributes and after doing that I executed "*opensips-cli -x mi
dp_reload*" and it says *OK*, but when I tried to dial, it still shows the
attributes.
I am using opensips 3.0, anything I can check?
Hi,
I've been trying to get my dialplan to reload but Im still getting the old
dialplan when I test.
the old dialplan has attributes on it, but I removed it, and when I tried
opensips-cli -x mi dp_reload
I am still getting the old attribute.
Anything else I should do or check?
Hi all, I have IP addresses setup in my mysql table address
++-++--+--+---+-+--+
| id | grp | ip | mask | port | proto | pattern | context_info |
++-++--+--+---+-+--+
| 9 |
How much additional load is added when siptrace is turned on, but the
database server is different. Meaning I have a separate DB just for doing
sip traces.
___
Users mailing list
Users@lists.opensips.org
We have been running opensip for quite sometime now, and we are doing CDRS
by flatstore module and then migrating it to a database server.
Everything works fine, the problem is that when we try to check our CDRs to
our provider's there's a big discrepancy on connected calls. Almost at
40,000
dealing with ?
Can you replicate a scenario where you make a call and, even after
query_flush_time seconds you do not see the CDR in the DB ?
Regards,
Vlad Paiu
OpenSIPS Developer
On 11/03/2011 10:20 PM, Vic Jolin wrote:
Hi guys,
Im trying to figure out why there are missing calls in our
Hi guys,
Im trying to figure out why there are missing calls in our CDR. We are not
using any other app but opensip to populate the CDRs but at the end of the
day, we are like missing 1,000 calls in our CDRs,
We generate lots of traffic and I'm thinking if
query_buffer_size=5
Hi,
I want to ask what types of security measures can we implement on an opensip
server?
TIA
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hi,
thanks for your time but I think it was just an error on my configuration
On Fri, Jul 8, 2011 at 11:59 PM, Bogdan-Andrei Iancu bog...@opensips.orgwrote:
**
Hi Vic,
could you get a backtrace from the core you got ?
Thanks and Regards,
Bogdan
On 07/05/2011 09:48 PM, Vic Jolin wrote
Hi,
after a few minutes that opensip is running, opensip just stops without
errors in console, so I started it to make a core dump.
the core dump output is as follows
Core was generated by `opensips -m 6000'.
Program terminated with signal 11, Segmentation fault.
#0 hash_string
for the number of rules you have (see
http://www.opensips.org/html/docs/modules/1.6.x/drouting.html#id249169).
To adjust the share mem used by OpenSIPS, either use the -m cli param
(number of Mb) or see the SHM_MEM_SIZE define in config.h (requires
re-compiling).
Regards,
Bogdan
Vic Jolin wrote
We are experiencing a lot of this:
Dec 30 16:45:09 [3016] ERROR:drouting:dr_load_routing_info: failed to add
routing info for rule id 83483 - skipping
Dec 30 16:45:09 [3016] WARNING:core:fm_malloc: Not enough free memory, will
atempt defragmenation
Our server memory is at 4GB and free Ram is
)
Kingston SSD disks
The proxy is used for aggregating US and Canadian callcenter traffic,
drouting ( 3 vendors, 30k codes each), no nat, no registrar, etc, just IP
auth.
-Laszlo
(It is just my experience, not a suggestion or a recommendation)
2010/12/3 Vic Jolin victor.jo...@gmail.com
. Then the proxy will allow the call only for that
maximum period and it will generate the START and STOP accounting events to
the RADIUS server.
Regards,
Bogdan
Vic Jolin wrote:
If I were to use freeradius for accounting, where should I put user list?
and also I'd like to check credit
Is opensip ok running on centos?
We are trying centos from our lab but we can't even increase CPS to 50 even
for a stateless configuration
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
we've even removed all features and just doing simple proxying but still
can't bring it up
On Wed, Dec 8, 2010 at 1:22 AM, Peter Lemenkov lemen...@gmail.com wrote:
2010/12/7 Vic Jolin victor.jo...@gmail.com:
Is opensip ok running on centos?
Yes, sure.
We are trying centos from our lab
If I were to use freeradius for accounting, where should I put user list?
and also I'd like to check credit as well before calling.
Thanks
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Hi all,
Just wanted to ask what is the hardware requirement to achieve at least 5000
cps? Is that even possible?
Thanks!
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
)
-Laszlo
2010/12/3 Vic Jolin victor.jo...@gmail.com
Hi all,
Just wanted to ask what is the hardware requirement to achieve at least
5000 cps? Is that even possible?
Thanks!
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org
)
Kingston SSD disks
The proxy is used for aggregating US and Canadian callcenter traffic,
drouting ( 3 vendors, 30k codes each), no nat, no registrar, etc, just IP
auth.
-Laszlo
(It is just my experience, not a suggestion or a recommendation)
2010/12/3 Vic Jolin victor.jo...@gmail.com
When more than 100 calls, calls does not complete, it's like sip packets are
not being sent properly
2010/12/4 Stanisław Pitucha virap...@gmail.com
On 03/12/10 16:03, Vic Jolin wrote:
I have been having problems with my opensip installation, I cant even do
more than 100 cps,
You'll have
Yes these are real calls
On Sat, Dec 4, 2010 at 12:55 AM, Laszlo las...@voipfreak.net wrote:
These are real calls, or some kind of sipp generated traffic?
2010/12/3 Vic Jolin victor.jo...@gmail.com
When more than 100 calls, calls does not complete, it's like sip packets
are not being sent
Hi all,
I just started playing around with opensip and I've already tested it with
single calls, the problem Im having is when there are multiple calls coming
in, we see a lot of INVITES but somehow the calls does not complete, I mean
I dial and nothing else happens.
Im only sending about 20 cps
49 matches
Mail list logo