Hi,
I know two ways to do Call Pickup using OpenSIPS,
The first one is almost effortless, use a phone capable to do it. Some
phones support the RFC5359 https://datatracker.ietf.org/doc/rfc5359/ (Page
147). As far as I know Yealink and Polycom support it. You have to
configure the phone to
Hi,
yes, you are right - it is not the 100% call pickup. To do a 100% call
pickup you need an B2B (and not a proxy) - as you need a B2BUA to bridge
the incoming call form the original caller with the incoming call from
the person doing the pickup.
In the Callpick Up with Event-based
Maybe this could help:
http://www.tech-invite.com/fo-sip/tinv-fo-sip-service-16.html
As you can see, you need to receive SUBSCRIBE to receive dialog
information about incoming call, to generate an INVITE with replace...
Good luck !
Michele
On 07/06/2017 16:06, maatohewetbi wrote:
> Is it any
Is it any way to upload whole script to test Call pickup with 2.3? I've
installed this version and pasted pickup config from module event_routing
documentation. Call Pickup doesn't work as it should. When I call one leg,
and want to handle this call by third user I get only 480 message after
There is no easy way to do it in 1.11 (except using some external script
to help opensips in correlating the 2 calls - the inbound call and the
callpickup call - via the management interface).
In 2.3 you can use the Event-based Routing (event_routing module) to do
it -
Can anyone explain how to make call pickup work in Opensips? In asterisk it
works ok, but I couldn't find any documentation about this feature in
Opensips.
--
View this message in context:
http://opensips-open-sip-server.1449251.n2.nabble.com/Call-Pickup-feature-in-Opensips-1-11-tp7607496.html