Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Iancu, I understand your thought process. I certainly understand that However, same device, exactly the same credentials and it authenticates properly against 2 other systems. They can't both be wrong and OpenSIPS be correct. For reference this is what I have installed: version: opensips 3.2

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

I'm quite sure OpenSIPS is computing the auth correctly, after all you are the only one complaining on this. And the point is to identify which side is not doing the proper computing and eventually see why - it may be a setting, a typo, etc... Just my 2 cents on the matter. Bogdan-Andrei Ianc

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

ing list<mailto:users@lists.opensips.org> Subject: Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8?? Iancu, I'm not sure what the point of this would be. Even if it showed that OpenSIPS was calculating incorrectly - then what? The device registers just fine with bo

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Iancu, I'm not sure what the point of this would be. Even if it showed that OpenSIPS was calculating incorrectly - then what? The device registers just fine with both asterisk and OpenSER v1.1 with exactly the same parameters. The device is calculating the response correctly for 2 other sys

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Hi Bob, Use the below to double check which party is failing in computing the right auth response. https://openplatform.xyz/sip_register_digest_authentication.html Regards, Bogdan-Andrei Iancu OpenSIPS Founder and Developer https://www.opensips-solutions.com OpenSIPS Summit 27-30 Sept 2

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Iancu, Thank you!! You identified the problem. Turns out that I had failed to add the IP for the OpenSIPS proxy to a firewall that was blocking the response from this new sip server (facepalm) to the device :-( So, once I fixed the firewall I thought that would be it...  Not my luck. Now it

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Hi Iancu, Thank you very much for your reply. Please ignore my previous message - it got sent prematurely. Like you, I am mystified by the fact that it says that it cannot find the domain realm when it is actually in the table. Keep in mind that I changed the code to specifically see the re

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Hi Bob, Well, the logs cover only the challenge part, the handling of the REGISTER without any credentials - this is the first normal step in the digest auth process. As per log, no Auth hdrs are found in the incoming REGISTER and a challenge reply is built and sent back (see the last log li

Re: [OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Hi Bob, The key log is this one: Aug 30 18:19:05 [17809] DBG:auth:pre_auth: credentials with given realm not found Basically OpenSIPS says it does not find the "digilink.net" realm in the provided auth header in REGISTER. As a quick experiment, could you use the empty string "" for realm (in

[OpenSIPS-Users] Cannot get registration to work with v3.2.8??

Hi. Have been a long time OpenSER user in a production environment. I managed to convert to OpenSIPS v3.2.8 on a CentOS 7 system and is working based on IP authentication however, I just cannot get sip registrations to work that used to work fine with OpenSER. I'm using a SPA112 running 1.4.1(