----------------------
---------------------
>
s.strongswan.org
Subject: Re: [strongSwan] Strongswan 5.6.3 rekey every 30 seconds
Hi,
You can use charon.delete_rekeyed = yes. But the better solution is to check
the logs of the CISCO side to understand why it is doing that.
Kind regards
Noel
On 24.07.2018 05:29, Doug Tucker wrote:
>
>
July 24, 2018 9:03:07 AM
To: Doug Tucker; users@lists.strongswan.org
Cc: Noel Kuntze
Subject: Re: [strongSwan] Strongswan 5.6.3 rekey every 30 seconds
Doug,
Check your configuration, if you have:
uniqueids=yes
auto=start
closeaction=restart
Then that is the cause of the issue. That is a bad c
Doug,
Check your configuration, if you have:
uniqueids=yes
auto=start
closeaction=restart
Then that is the cause of the issue. That is a bad combination that gets
you in an infinite rekey loop.
--Jafar
On 7/24/2018 5:02 AM, Noel Kuntze wrote:
Hi,
You can use charon.delete_rekeyed = ye
Hi,
You can use charon.delete_rekeyed = yes. But the better solution is to check
the logs of the CISCO side to understand why it is doing that.
Kind regards
Noel
On 24.07.2018 05:29, Doug Tucker wrote:
>
> Have an issue I've never seen before. Connecting to a remote Cisco router.
> Have ver
Have an issue I've never seen before. Connecting to a remote Cisco router.
Have verified settings on the cisco, our rekey options look the same. We get
an established connection, then 30 seconds later a rekey happens and it
installs under the new one. This goes on forever. Here are the logs