You do not need to restart your network over and over again. Just
setting your sysctl settings correctly should do the trick. Have a look
at http://sunoano.name/ws/openvz.html#sysctl_openvz
___
Users mailing list
Users@openvz.org
Mike Hi everyone. I found some threads in OpenVZ's forum about
Mike MASQUERADE in iptables that said it's not yet supported. Can
Mike someone conform this?
It works but you can use the SNAT target instead which is the preferred
way to map addresses because is creates less overhead.
The
Marc Is it a good idea to have a CT as NAT and Firewall or I should use
Marc the HN for this purpose? Is there any doc explaining a similar
Marc configuration? Any other recommendation?
I would recommend you do routing and packet filtering on the HN since it
is easier and makes a lot more sense
Scott Ok, so now I know when squeeze might come out... But how long is
Scott the current version of Debian going to be supported? Is that
Scott related to the release of squeeze?
See other posting in this thread.
With regards to official support of OpenVZ as well as Linux-VServer on
the next
Jorge Debian is the standard at GNU/Linux operating systems,
Let us just say it is used by many many folks ... :-) there are other
great Linux distributions out there.
Jorge how it's possible?
Debian just provides Linux as one of its kernel flavors. Amongst Linux
kernels in Debian there were
Scott How much longer is the current version of Debian going to be
Scott supported?
If the RC bugs are down to a sane number the freeze for squeeze (next
stable Debian release) is planned to happen in march. However, dates
surrounding this event are still very fuzzy at this point.
Josip Er, but with that you've just begun to start calculating the
Josip end-of-support date. The testing distribution goes through
Josip periods of being frozen, and only then new stable gets released.
Josip And then a year after *that* does the old stable release gets
Josip its security
I am still waiting for positive feedback from Gmane. Meanwhile I also
subscribed lxc-users and lxc-devel with mail archive e.g.
http://www.mail-archive.com/lxc-us...@lists.sourceforge.net
___
Users mailing list
Users@openvz.org
,[ Initial Thought/Message ]
| God I wish we had a .32 OpenVZ kernel then this discussion wouldn't
| even take place ... I appreciate all the excellent work done by all
| OpenVZ folks! Kir, you rock! Well, here it is:
`
Hello folks!
We have evaluated the situation once again and
Sorry, but so far we only tested on Debian Lenny. But I guess it
works on Debian Squeeze as well.
Suno, want to give that a try?
Dietmar Just tested - 2.6.18 does not work with new udev (missing
Dietmar signalfd support).
Yes I know, tested that as well. See my last post. I tried to
Excellent, I just signed up. I am going to register it with Gmane too.
___
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
Gaston I've been told that remote storage with OpenVZ is not a
Gaston well-known area
true, but there is a rising interest I have to say. I am also interested
a lot.
Gaston , but I have to ask anyway, so as to leverage in previous
Gaston experiences. Any information is welcome, even more
Here is a link collection I started for myself ... page is work in
progress but the links I collected might help you
http://sunoano.name/ws/public_xhtml/hardware.htmlr#distributed_filesystem
pgpVgDMDybHBS.pgp
Description: PGP signature
___
Users
albinootje I wondered whether Grsecurity and Tomoyo Linux would work
albinootje with OpenVZ kernels, and came across this page :
albinootje http://wiki.openvz.org/Grsecurity
Grsecurity has been discontinued no?
pgpT7H94TltZW.pgp
Description: PGP signature
Ladies, Gents,
I am a heavy OpenVZ user myself [0] and just an hour ago I got notion of
http://openisp.net/openisp/unxsVZ for the first time. Looks interesting
but then I got a few remaining questions/remarks:
- Why did you make unxsVZ open source? What is your business idea?
- What _exactly_
Greg Hi, On one server setup with proxmox i intent to have 4 VE (web,
Greg dns, mysql, mail). I guess i'll have 1 IP for each VE. Concerning
Greg the firewall i'm thinking of configuring iptables but my concern
Greg is to do it on HN or on each VE. I'm looking for best way to do
Greg it so
you say webservices and SSL (Secure Sockets Layer) so I guess you want
to do websites i.e. https for example yes?
If so, then the cloning will give you a working clone instantly.
However, you need to have wildcard certs (e.g. *.example.com which would
match www.example.com, mail.example.com,
Hi folks,
often we want to have encryption but then full-disk encryption (e.g.
dm-crypt and LUKS) might not be an option because be already have some
up and running HN and do not want to install from scratch.
Another reason would be that we just have/own a VE. In both cases
filesystem-level
Jose Hello! We have a OpenVz server working with a subnet we have 6
Jose VPS created, but this subnet is full and we need to add more IP
Jose address, so I have another subnet available but I can't migrate
Jose my actual VPS, is posible that I can have some VPS with one
Jose subnet and
Jose My VE Node have 255.255.255.240 its /28 network configured
Jose (public IPs) but Im using all the IPs in this range, I need more
Jose IPs for create new VPS. But the DataCenter dosn't have more IPs
Jose availables next to this range.
Ok. It does not matter if you do not have one range
I have seen the lockedpages triggered a few times now:
http://sunoano.pastebin.com/m2f7ee9e9
As can be seen, for the VE (Virtual Environment) with VEID 2002, the
lockedpages failcnt got hit 8 times ... barrier and limit is 256 but
maxheld only 106?! maxheld should be at least 256 too no? How can
Jure ways, but at the end we concluded that there are too many
Jure unknowns still and that the technology is not yet mature enough
Jure to run in production.
I think both technologies can be considered prime time ready for any
kind of commercial service with any kind of SLA (Service Level
Hi folks,
I added a new feature to vzbulk[0] which shows if some VE (Virtual
Environment) has hit any of its beancounter barrer/limit. [1] shows an
example output where the VE with veid 3003 has hit its barrier with
privvmpages and tcpsndbuf.
This script (vzbulk) is an effort that goes hand in
Mihamina I want them to be reached from the outside (of the laptop,
Mihamina via SSH, HTTP, FTP,...)
yes, no problem
Mihamina I will put the containers on the same subnet (the laptop
Mihamina alone: 192.168.1.1, the containers: 192.168.1.0/24)
yes, if you put them into the same /24 subnet
Hi Scott and others,
I see our talk in #openvz yesterday was fruitful -- you have started
signing your OS templates in [0] and I would like to thank you for that
and all your other efforts.
I run a quick test http://pastebin.com/f3c59094f
All went fine as can be seen -- thank you Scott! I as
Scott The answer on this is that no one knows yet. I don't think it is
Scott going to happy real soon... But in a month or two maybe...
It is probably going to take a bit longer ... time runs fast these days :-)
Scott I myself would really like to see vzpkg2 and pkg-cacher replace
Scott
This page http://wiki.openvz.org/Install_vzpkg2_and_pkg-cacher mentions,
vzpkg2 OS templates are only available in .rpm format. Has anyone made
them available as .deb already?
___
Users mailing list
Users@openvz.org
Do we know already what is the agenda for vzpkg2 i.e. will vzpkg2
replace the now official vzpkg any time soon? What task may be pending
so this switch could happen any time soon?
___
Users mailing list
Users@openvz.org
Tim Our processes allow for fail-over from a failing server onto a
Tim good server. We do this by using OpenVZ. So, if Server5 should
Tim fail (let's assume its CPU died), we would fail-over the Server5
Tim virtual environment (which includes its IP Address) onto Server1
Tim and clients will
Samuel Hey guys, I am just new to openvz and can't figure out how to
Samuel create a debian vz template.
did you take a look at http://wiki.openvz.org/Debian_template_creation ?
___
Users mailing list
Users@openvz.org
Santi I need to setup a veth device inside a CT to install a DHCP
Santi server..
check the URL (Uniform Resource Locator), there is some wikipage about
setting up such DHCP (Dynamic Host Configuration Protocol) setup
http://wiki.openvz.org/w/index.php?title=Category:Networkingoldid=1521
Robert I finished the packages of pkg-cacher and vzpkg for Debian HNs.
terrific! Any idea if/how those are going to make it into official
Debian repositories?
by the way, starting with 2.6.26, and thanks to maks also known as
Maximilian Attems (= Debian package maintainer) Debian now provides
jimbob Hello, Where can I find information on how the official openvz
jimbob templates are created?
http://wiki.openvz.org/Debian_template_creation
___
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
Does anyone use --setmode at all? If so where are its parameters e.g.
`ignore' stored on the file system i.e. which file?
___
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
I just wanted to say, starting with 2.6.26, Debian is now providing
precompiled kernels (as well as user-space tools vzquota and vzctl) from
its official mirrors:
,
| [EMAIL PROTECTED]:~$ lsb_release -ric
| Distributor ID: Debian
| Release:unstable
| Codename: sid
| [EMAIL
oops, sorry, hit `f' instead of `a' with Emacs i.e. send a follow-up
instead of a new article
___
Users mailing list
Users@openvz.org
https://openvz.org/mailman/listinfo/users
36 matches
Mail list logo