On Feb 13, 2014, at 00:32 , Maurice James wrote:
> That worked. Was there any other way to do it without a restart?
probably not
There have been a few fixes in this area…worth checking after upgrade to 3.4
Thanks,
michal
>
> -Original Message-
> From: Dafna Ron [mailto:d...@redhat.c
Hi,
I want to create a live snapshot, but it fails at the finalizing task. There
are 3 events:
- Snapshot 'test' creation for VM 'snaptest' was initiated by EwertA
- Failed to create live snapshot 'test' for VM 'snaptest'. VM restart is
recommended.
- Failed to complete snapshot 'test' creatio
anup
> > $ engine-backup --mode=restore --scope=all
> > --file=engine-20140211-1457.tar.bz2 --log=engine-backup.log
> > Restoring...
> > FATAL: Database is not empty
> >
> > Attached are the two engine-cleanup logs from both attempts. The
> > first (fro
- Original Message -
> From: "Brian Proffitt"
> To: users@ovirt.org
> Cc: redhat-proj...@bitergia.com
> Sent: Wednesday, February 12, 2014 10:12:20 PM
> Subject: [Users] New oVirt Community Dashboard
>
> With much pleasure, I would like to introduce a new tool for the oVirt
> community:
Yes, I know! Why is there this restriction? I have the following scenario: I
have a "recover vm" with one bootable disk attached. Now I want to repair some
broken configs from another vm’s boot disk. First I unattach the device from
the broken vm. If I forget to remove the bootable flag, then I
m install ovirt-engine-setup
>
> $ engine-backup --mode=restore --scope=all
> --file=engine-20140211-1457.tar.bz2 --log=engine-backup.log
> Restoring...
> FATAL: Database is not empty
>
> $ engine-cleanup
> $ engine-backup --mode=restore --scope=all
> --file=engine-20140211
- Original Message -
> From: "Alon Bar-Lev"
> To: "Juan Pablo Lorier"
> Cc: "Yedidyah Bar David" , "users"
> Sent: Wednesday, February 12, 2014 9:13:30 PM
> Subject: Re: [Users] engine-backup --restore
>
>
>
> - Original Message -
> > From: "Juan Pablo Lorier"
> > To: "Yedidy
- Original Message -
> From: "Trey Dockendorf"
> To: "Juan Pablo Lorier"
> Cc: "Yedidyah Bar David" , "users"
> Sent: Wednesday, February 12, 2014 9:32:55 PM
> Subject: Re: [Users] engine-backup --restore
>
> I was having the same issue (and posted about it today, with full
> steps). I
- Original Message -
> From: "Shahar Havivi"
> To: users@ovirt.org
> Cc: "Juan Antonio Hernandez Fernandez" ,
> rhevm-...@lists.fedorahosted.org, "Tejesh M"
>
> Sent: Wednesday, February 12, 2014 11:22:20 PM
> Subject: Re: [Users] [rhevm-api] Assign IP address to VM using Java SDK
>
>
Rob Abshear writes:
>
> Two hammer strikes and two nails firmly driven. You were absolutely
> correct on both counts. I have green nodes!!! Thanks a bazillion!!
>
> On 12/13/2013 02:04 PM, Alon Bar-Lev wrote:
> >>
> > Can it be[1]?
> >
> > If you have apache-sshd-0.9.0 please downgrade to
On 02/12/2014 11:21 PM, Gianluca Cecchi wrote:
On Wed, Feb 12, 2014 at 6:18 PM, ml ml wrote:
I guess the brick details are stored in the postgres database and everything
else after will fail?!
Yes, we fixed the issue with resolving brick's host while syncing with
gluster CLI in oVirt 3.4. H
Hi,
I tested the following:
https://bugzilla.redhat.com/1053646easily collapsible left-pane - was
not included in test day 1 (I was supposed to test it back then) - works fine.
https://bugzilla.redhat.com/1054209 - read only disks - works fine.
https://bugzilla.redhat.com/1054219 - Onl
> -Original Message-
> From: Fabian Deutsch [mailto:fabi...@redhat.com]
> Sent: Thursday, 13 February 2014 3:02 AM
> >
> > If it's generally faster to get Node up vs. a engine-initiated host, I
> > think I'll def try it next time. Thanks :)
>
> Yeah - that's also true :)
>
> Did you try o
That worked. Was there any other way to do it without a restart?
-Original Message-
From: Dafna Ron [mailto:d...@redhat.com]
Sent: Wednesday, February 12, 2014 10:37 AM
To: Maurice James
Cc: Meital Bourvine; users@ovirt.org
Subject: Re: [Users] Stuck Migration
If it's not listed in any o
Hi Eli,
I omitted to post that, but I did use them. It seems that others had
trouble too as the database is owned by postgres after the restore and it's
needed to change the engine user's password when the restore is on a
different host. Thanks to all the ones that posted helpful tips, tomorrow
I'
- Original Message -
> From: "Greg Sheremeta"
> To: "Michal Skrivanek"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 12:15:44 PM
> Subject: Re: [Users] test day help -- console
>
>
>
> - Original Message -
> > From: "Michal Skrivanek"
> > To: "Greg Sheremeta"
> > Cc:
- Original Message -
> From: "Juan Pablo Lorier"
> To: "users"
> Sent: Wednesday, February 12, 2014 6:37:28 PM
> Subject: [Users] snapshots not shown in webadmin on 3.3.3
>
> Hi,
>
> I've updated to 3.3.3 last week and now I find that the snapshots are
> not shown in webadmin. I've ta
- Original Message -
> From: "Juan Pablo Lorier"
> To: "Yedidyah Bar David"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 7:55:35 PM
> Subject: Re: [Users] Problems accesing the database
>
> Hi Yedidyah,
>
> But If I run engine-setup and then engine-backup restore shuldn't it
>
On 12.02.14 22:55, Itamar Heim wrote:
> On 02/12/2014 03:14 PM, Tejesh M wrote:
> >Hi,
> >
> >Can anyone share sample code on how to assign IP address to guest os &
> >changing the root password while creating VM from Template using Java SDK?
Hi Tejesh,
You should start here:
http://www.ovirt.org/A
Hi,
I have tested iproute2:
Test:
==
- Deployed Host (EL family)
- put in maintenance
- on host changed vdsm.conf to:
[addresses]
management_port = 54321
[vars]
ssl = true
net_configurator = iproute2
net_persistence = unified
- put host up
- Added the network (net25)
-> Networks -> N
On 02/12/2014 03:14 PM, Tejesh M wrote:
Hi,
Can anyone share sample code on how to assign IP address to guest os &
changing the root password while creating VM from Template using Java SDK?
--
Thanks & Regards
Lucky
___
rhevm-api mailing list
rhevm
With much pleasure, I would like to introduce a new tool for the oVirt
community: a community dashboard from the team at Bitergia.
This dashboard, found at [1], should enable us to get better insights into the
activity within our community, as well as what communication channels are
performing
I was having the same issue (and posted about it today, with full
steps). I'd reply to my current post to list but I don't seem to
receive my own posts.
I have since taken these steps (as root)
$ su - postgres -c "dropdb engine"
$ su - postgres -c "psql -c \"create user engine password ''\""
$ s
- Original Message -
> From: "Juan Pablo Lorier"
> To: "Yedidyah Bar David"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 9:10:43 PM
> Subject: Re: [Users] engine-backup --restore
>
> Well, too soon to say boodbye.
> Thought I used --change-db-credentials in the restore, the engi
Well, too soon to say boodbye.
Thought I used --change-db-credentials in the restore, the engine seems
to be unable to connect to the database. I assume that it didn't get the
new password, so, is there a way to tell the engine about the new password?
Regards,
On 12/02/14 16:03, Yedidyah Bar David
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I know there are 2 ways to create the new vm.
I specifically looked at the size to determine
if I used the correct rest api call.
To answer your question:
I did a full clone of the copy.
and this worked correct, as far as I can tell.
I looked at the a
OK, that did work. I droped the database and created it back and also
changed the password for the engine user.
That did the trick. I now have to figure out why the web is blank, but
at least is a step forward.
Regards,
On 12/02/14 16:03, Yedidyah Bar David wrote:
> - Original Message -
>>
On 02/12/2014 10:08 AM, Tejesh M wrote:
> Thanks Juan... I'm in process of automating VM creation from Template &
> i want to assign random root password.. can you suggest whether is it
> possible via java SDK?
>
This is possible with a combination of cloud-init and the Java SDK.
First you will
Almost, when you mean random password, you mean for the engine user in
the database?
The new install and the old differ in some things in the db, so I tried
to made then the same, but I saw a post of a user that removed the
engine database and user and created them again before trying to
restore, i
- Original Message -
> From: "Juan Pablo Lorier"
> To: "Yedidyah Bar David"
> Cc: "Sahina Bose" , "users"
> Sent: Wednesday, February 12, 2014 7:55:35 PM
> Subject: Re: [Users] Problems accesing the database
>
> Hi Yedidyah,
>
> But If I run engine-setup and then engine-backup restore
OK,
Thanks for the helpfull information. Learned something more again!
Kind regards,
Koen
On Feb 12, 2014 5:22 PM, "Doron Fediuck" wrote:
>
>
> - Original Message -
> > From: "René Koch"
> > To: "Koen Vanoppen"
> > Cc: users@ovirt.org
> > Sent: Wednesday, February 12, 2014 4:18:37 PM
>
Hi Yedidyah,
But If I run engine-setup and then engine-backup restore shuldn't it
import the data to the existing db created by engine-setup?
That's shown everywhere so I thought it's a valid way to migrate
Regards,
On 12/02/14 15:44, Yedidyah Bar David wrote:
> - Original Message -
>> Fr
On Wed, Feb 12, 2014 at 6:18 PM, ml ml wrote:
>
> I guess the brick details are stored in the postgres database and everything
> else after will fail?!
>
> Am i the only one with dedicated migration/storage interfaces? :)
>
> Thanks,
> Mario
>
One of the workarounds I found and that works for me
So I've got a handful of oVirt nodes now, and most of them have over 100G of
unallocated disk space. I'm trying to figure out how to best take advantage
of that space. I see two possibilities: storage for oVirt, or
backup/archive storage.
I'm currently using a single NFS server for VM/iso/export s
- Original Message -
> From: "Juan Pablo Lorier"
> To: "Sahina Bose"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 7:01:20 PM
> Subject: [Users] Problems accesing the database
>
> Hi Sahina,
>
> Sorry to ping you directly, but you were of great help last time. I'm
> also copying t
On Wed, 2014-02-12 at 11:22 -0500, Doron Fediuck wrote:
>
> - Original Message -
> > From: "René Koch"
> > To: "Koen Vanoppen"
> > Cc: users@ovirt.org
> > Sent: Wednesday, February 12, 2014 4:18:37 PM
> > Subject: Re: [Users] Memory usage
> >
> > On Wed, 2014-02-12 at 15:14 +0100, Koen
- Original Message -
> From: "Michal Skrivanek"
> To: "Yedidyah Bar David"
> Cc: "Greg Sheremeta" , "users"
> Sent: Wednesday, February 12, 2014 12:16:42 PM
> Subject: Re: [Users] test day help -- console
>
>
>
> On 12 Feb 2014, at 10:09, Yedidyah Bar David wrote:
>
> > - Orig
On 12 Feb 2014, at 18:15, Greg Sheremeta wrote:
>
>
> - Original Message -
>> From: "Michal Skrivanek"
>> To: "Greg Sheremeta"
>> Cc: "users"
>> Sent: Wednesday, February 12, 2014 12:12:27 PM
>> Subject: Re: [Users] test day help -- console
>>
>>
>>
>> On 12 Feb 2014, at 18:08,
Okay, here is what i did:
1.) i stopped the ovirt engine
2.) then i reconfigured the gluster nodes/bricks manually...(i changed the
path and host name)
Before:
=
gluster> volume info
Volume Name: GlusterSuxx
Type: Replicate
Volume ID: 8339d0b8-49ad-4d2d-9def-102ec025937f
Status: Sta
On 12 Feb 2014, at 10:09, Yedidyah Bar David wrote:
> - Original Message -
>> From: "Michal Skrivanek"
>> To: "Greg Sheremeta"
>> Cc: "users"
>> Sent: Wednesday, February 12, 2014 10:43:18 AM
>> Subject: Re: [Users] test day help -- console
>>
>>
>>
>> On 11 Feb 2014, at 23:57, Gr
- Original Message -
> From: "Michal Skrivanek"
> To: "Greg Sheremeta"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 12:12:27 PM
> Subject: Re: [Users] test day help -- console
>
>
>
> On 12 Feb 2014, at 18:08, Greg Sheremeta wrote:
>
> >
> >
> > - Original Message
- Original Message -
> From: "Frantisek Kobzik"
> To: "Greg Sheremeta"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 3:31:56 AM
> Subject: Re: [Users] test day help -- console
>
> Hi Greg,
> ad 1,2: what virt-viewer version are you using? old clients don't have
> support for conn
On 12 Feb 2014, at 18:08, Greg Sheremeta wrote:
>
>
> - Original Message -
>> From: "Michal Skrivanek"
>> To: "Greg Sheremeta"
>> Cc: "users"
>> Sent: Wednesday, February 12, 2014 3:43:18 AM
>> Subject: Re: [Users] test day help -- console
>>
>>
>>
>> On 11 Feb 2014, at 23:57, G
- Original Message -
> From: "Jiri Belka"
> To: "Greg Sheremeta"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 4:17:29 AM
> Subject: Re: [Users] test day help -- console
>
> On Tue, 11 Feb 2014 17:57:52 -0500 (EST)
> Greg Sheremeta wrote:
>
> > I'm having a tough time getting a
- Original Message -
> From: "Fabian Deutsch"
> To: "Greg Sheremeta"
> Cc: "Justin Clacherty" , "Sandro Bonazzola"
> , Users@ovirt.org
> Sent: Wednesday, February 12, 2014 12:02:21 PM
> Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
>
> Am Mittwoch, den 12.02.
- Original Message -
> From: "Michal Skrivanek"
> To: "Greg Sheremeta"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 3:43:18 AM
> Subject: Re: [Users] test day help -- console
>
>
>
> On 11 Feb 2014, at 23:57, Greg Sheremeta wrote:
>
> > I'm having a tough time getting a VM c
Am Mittwoch, den 12.02.2014, 11:59 -0500 schrieb Greg Sheremeta:
>
> - Original Message -
> > From: "Fabian Deutsch"
> > To: "Greg Sheremeta"
> > Cc: "Justin Clacherty" , "Sandro Bonazzola"
> > , Users@ovirt.org
> > Sent: Wednesday, February 12, 2014 9:13:53 AM
> > Subject: Re: [Users]
Hi Sahina,
Sorry to ping you directly, but you were of great help last time. I'm
also copying the list.
In the process of recreating the DC I've decided to migrate the engine
from a virtualbox vm to a bare metal host and I can't get engine-backup
to restore the engine.
Both are Centos 6.5 with eng
- Original Message -
> From: "Fabian Deutsch"
> To: "Greg Sheremeta"
> Cc: "Justin Clacherty" , "Sandro Bonazzola"
> , Users@ovirt.org
> Sent: Wednesday, February 12, 2014 9:13:53 AM
> Subject: Re: [Users] [ANN] oVirt 3.4.0 beta 2 Test Day - Today Feb 11th
>
> Am Dienstag, den 11.02.2
Hi,
I've updated to 3.3.3 last week and now I find that the snapshots are
not shown in webadmin. I've taken some new ones to see if it was due to
the migration, but though they finish correctly, they are not shown in
the webadmin tab.
Is there a way to list the snapshots other than the webadmin?
R
Hi,
There are 2 different ways to create a vm from a template:
* thin
* clone
If you create a vm that is a thin-copy of a template, it works like a snapshot,
creating a new volume on top of the template's disk.
If you create a vm that is a full clone then you clone the whole disk image.
did you
- Original Message -
> From: "Giorgio Bersano"
> To: Users@ovirt.org
> Sent: Wednesday, February 12, 2014 12:28:33 PM
> Subject: [Users] hosted-engine deployment doesn't accept legal email address
> (ovirt-3.4.0-prerelease)
>
> Hi,
> I am happily testing the hosted engine feature, sor
- Original Message -
> From: "René Koch"
> To: "Koen Vanoppen"
> Cc: users@ovirt.org
> Sent: Wednesday, February 12, 2014 4:18:37 PM
> Subject: Re: [Users] Memory usage
>
> On Wed, 2014-02-12 at 15:14 +0100, Koen Vanoppen wrote:
> > In The GUI, it says it's using 25% of the memory.
>
Minutes:http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-12-15.03.html
Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-12-15.03.txt
Log:
http://ovirt.org/meetings/ovirt/2014/ovirt.2014-02-12-15.03.log.html
=
#ovirt: oVirt Weekly Sync
ENT
X-MOZ-GENERATION:1
END:VEVENT
BEGIN:VEVENT
CREATED:20140207T162249Z
LAST-MODIFIED:20140212T152724Z
DTSTAMP:20140212T152724Z
UID:d84f83fe-7039-4c00-b4e1-432340f92764
SUMMARY:oVirt 3.4 Second Test day
DTSTART;VALUE=DATE:20140211
DTEND;VALUE=DATE:20140212
SEQUENCE:1
X-MOZ-GENERATION:2
END:V
Hi,
I got a question regarding the reported actual disk size
of a vm.
you can obtain this value fine via api:
https://your_engine/api/vms/{id}/disks/
however, if the vm is cloned from a template
this disk size does not seem to show the
actual size of the whole disk but instead
the difference f
disks can only be edited when attached to a vm
On 02/12/2014 03:04 PM, andreas.ew...@cbc.de wrote:
Hi,
If I remove a disk image from a Virtual Machine, then I can’t edit the disk
properties in the „Disks“ tab. (e.g. bootable flag)
It is only possible to change the flags on attached disks.
My t
If it's not listed in any of the hosts than its a cache issue in engine.
if you are reluctant to reboot the engine server, than restart the
postgress and than the engine.
Dafna
On 02/12/2014 02:10 PM, Maurice James wrote:
Log is attached
-
Am Mittwoch, den 12.02.2014, 12:17 -0500 schrieb Douglas Schilling
Landgraf:
> On 02/12/2014 02:17 AM, Udaya Kiran P wrote:
> > Hi All,
> >
> > I am trying to install oVirt Node Hypervisor 3.0.3 (f19) . I am getting
> > below error.
> >
> > Exception: RuntimeError('Failed to Partition/format')
> >
Hi,
Is it possible in oVirt to use a cloud ready image of Ubuntu in oVirt ?
Those images can be found in this website and are in qcow2 format.
http://cloud-images.ubuntu.com/precise/current/
I want to use this image to make a template from it that I can configure in
oVirt.
Martin Trudel
_
Hi,
I tested following features on F19 (both engine and hosts):
BZ1043473 oVirt Guest Agent for ubuntu
- works without problems on 12.04 LTS and 13.04
BZ1043469 oVirt Guest Agent for OpenSUSE
- works without problems on 13.1
BZ1031040 [RFE] RunOnce dialog can not set a vnc keymap itself
-
Hi,
If I remove a disk image from a Virtual Machine, then I can’t edit the disk
properties in the „Disks“ tab. (e.g. bootable flag)
It is only possible to change the flags on attached disks.
My test environments are engine versions 3.3.3 and 3.4 beta2
Best regards
Andreas
signature.asc
Descrip
>
> Message: 2
> Date: Wed, 12 Feb 2014 15:17:18 +0800 (SGT)
> From: Udaya Kiran P
> To: users
> Subject: [Users] oVirt Node Hypervisor 3.0.3 (f19) Installation Failed
> - Failed to Partition/format
> Message-ID:
> <1392189438.17050.yahoomail...@web193206.mail.sg3.yahoo.com>
Hi
I had tested the following items :
***
infra 1038222 Read Only Admin role in AP
Test results : Working as expected, user can only view everything but can not
perform any action
*
On Wed, 2014-02-12 at 15:14 +0100, Koen Vanoppen wrote:
> In The GUI, it says it's using 25% of the memory.
I guess it's the real value, right?
The same happened for the memcached vm, someone reported to me -
negative value in REST-API, but correct graph in oVirt webadmin GUI.
I fear I have no i
On 02/12/2014 02:17 AM, Udaya Kiran P wrote:
Hi All,
I am trying to install oVirt Node Hypervisor 3.0.3 (f19) . I am getting
below error.
Exception: RuntimeError('Failed to Partition/format')
The progress bar stopped at 40%.
Please suggest how to fix or which logs to be checked?
Hi Udaya,
In The GUI, it says it's using 25% of the memory.
2014-02-12 15:10 GMT+01:00 Koen Vanoppen :
> Thanks for the quick respons, but there is no memcached running on that VM.
>
> Kind regards
>
>
> 2014-02-12 15:06 GMT+01:00 René Koch :
>
> On Wed, 2014-02-12 at 14:55 +0100, Koen Vanoppen wrote:
>>
Am Dienstag, den 11.02.2014, 14:06 -0500 schrieb Greg Sheremeta:
>
> - Original Message -
> > From: "Fabian Deutsch"
> > To: "Greg Sheremeta"
> > Cc: "Justin Clacherty" , "Sandro Bonazzola"
> > , Users@ovirt.org
> > Sent: Tuesday, February 11, 2014 12:19:49 PM
> > Subject: Re: [Users] [
Thanks for the quick respons, but there is no memcached running on that VM.
Kind regards
2014-02-12 15:06 GMT+01:00 René Koch :
> On Wed, 2014-02-12 at 14:55 +0100, Koen Vanoppen wrote:
> > Dear all,
> >
> >
> > When we monitor one of our machines, we noticed that there was one vm
> > that was
Its not listed on any of the hosts
> Date: Wed, 12 Feb 2014 11:14:56 +
> From: d...@redhat.com
> To: midnightst...@msn.com
> CC: users@ovirt.org
> Subject: Re: [Users] Stuck Migration
>
> please run in both hosts:
> vdsClient - s 0 list table
>
> do you see the vm on the list in any of the h
On Wed, 2014-02-12 at 14:55 +0100, Koen Vanoppen wrote:
> Dear all,
>
>
> When we monitor one of our machines, we noticed that there was one vm
> that was constantly giving a error of memory usage. But when we took a
> look at it, there is actually nothing wrong with it. Now we looked
> furhter t
Dear all,
When we monitor one of our machines, we noticed that there was one vm that
was constantly giving a error of memory usage. But when we took a look at
it, there is actually nothing wrong with it. Now we looked furhter then
that. We looked at the API of the machine and noticed something ver
Follow up on my testing for test day 2 on beta 2.
1. "Reboot VM" functionality.
The results was the same as the first test day. It was confirmed to me that the
1 minute delay on the reboot was intentional for now. So all in all Green
light on this feature.
2. Fix Control-Alt-Delete functionali
Hi,
I would like to know if the following scenario is supported in ovirt
(currently testing 3.3.2).
You have a vm with an attached disk.
You want to start this vm with an attached iso image via cd-rom
you want to pass to this started system cloud-init metadata via
"run once" or REST.
I know that
Hi,
I tested $subject,
I have to say i don't know much about networks / neutron,
so maybe some of the issues i encountered are just my fault..
i used pre-configured neutron server (thanks Mike!)
and the beta2 for ovirt-engine, i used the wiki to configure it:
http://www.ovirt.org/Overlay_Networks_
Thanks Vojtech,
There is a bug (and a fix) here:
https://bugzilla.redhat.com/1063883
Shahar.
On 11.02.14 18:20, Vojtech Szocs wrote:
> Hello,
>
> I think I found a possible bug while testing Shahar's vm-init-persistent
> feature, not sure if related to vm-init-persistent or Engine vs. vdsm RPC
>
On Wed, 2014-02-12 at 06:09 -0500, Yedidyah Bar David wrote:
> - Original Message -
> > From: "Karli Sjöberg"
> > To: d...@redhat.com
> > Cc: ih...@redhat.com, users@ovirt.org
> > Sent: Wednesday, February 12, 2014 12:34:18 PM
> > Subject: Re: [Users] [ovirt-test-day-2] Testing all-in-one
please run in both hosts:
vdsClient - s 0 list table
do you see the vm on the list in any of the hosts? what state is it if
it exists?
On 02/12/2014 10:45 AM, Maurice James wrote:
I have a vm that is shut down and is somehow stuck in a migration
state. Im running version 3.3.3-2 on this s
is the domain visible from the host the vm is running?
please run vdsClient -s 0 getStorageDomainInfo
21619c8e-99ea-4813-be02-d708971e5393
did you install the vm from cd?
On 02/12/2014 02:06 AM, Maurice James wrote:
ImageDoesNotExistInSD: Image does not exist in domain:
'image=d09418b1-285
- Original Message -
> From: "Karli Sjöberg"
> To: d...@redhat.com
> Cc: ih...@redhat.com, users@ovirt.org
> Sent: Wednesday, February 12, 2014 12:34:18 PM
> Subject: Re: [Users] [ovirt-test-day-2] Testing all-in-one feature on f19
>
> On Wed, 2014-02-12 at 05:09 -0500, Yedidyah Bar David
Can you please attach engine and vdsm longs?
- Original Message -
> From: "Maurice James"
> To: users@ovirt.org
> Sent: Wednesday, February 12, 2014 12:45:33 PM
> Subject: [Users] Stuck Migration
> I have a vm that is shut down and is somehow stuck in a migration state. Im
> running ve
I have a vm that is shut down and is somehow stuck in a migration state. Im
running version 3.3.3-2 on this setup. The vm disk is activated and cannot
be deactivated, and the vm is shut down and cannot be started. When I try to
start the vm it tells me that it cannot be started because it is in the
On Wed, 2014-02-12 at 05:09 -0500, Yedidyah Bar David wrote:
> - Original Message -
> > From: "Karli Sjöberg"
> > To: d...@redhat.com
> > Cc: ih...@redhat.com, users@ovirt.org
> > Sent: Wednesday, February 12, 2014 11:52:55 AM
> > Subject: Re: [Users] [ovirt-test-day-2] Testing all-in-one
Hi,
I am happily testing the hosted engine feature, sorry I was late on
the test day but I dare to provide some feedback.
To be more clear I prefer to report one item per email.
This is related to a really minor issue I think it doesn't deserve a
Bugzilla but I'm ready to do it if requested.
So,
- Original Message -
> From: "Karli Sjöberg"
> To: d...@redhat.com
> Cc: ih...@redhat.com, users@ovirt.org
> Sent: Wednesday, February 12, 2014 11:52:55 AM
> Subject: Re: [Users] [ovirt-test-day-2] Testing all-in-one feature on f19
> > > > >
> > > > > Oh, and we tried using the "ovirt-log
- Original Message -
> From: "Frank Wall"
> To: "Doron Fediuck"
> Cc: users@ovirt.org, "Greg Padgett" , "Jiri Moskovcak"
> , "Martin Sivak"
>
> Sent: Tuesday, February 11, 2014 7:05:49 PM
> Subject: Re: [Users] Remove host from hosted-engine setup
>
> Hi Doron,
>
> On Tue, Feb 11, 2
- Original Message -
> From: "David Young"
> To: "Alon Bar-Lev"
> Cc: users@ovirt.org
> Sent: Wednesday, February 12, 2014 11:01:02 AM
> Subject: Re: [Users] Info re the "jasperreports-rpm" package
>
> Thanks Alon, I noted the same on the github mirror.
>
> Do you then manually run th
On Wed, 2014-02-12 at 03:35 -0500, Yedidyah Bar David wrote:
> - Original Message -
> > From: "Karli Sjöberg"
> > To: d...@redhat.com
> > Cc: ih...@redhat.com, users@ovirt.org
> > Sent: Wednesday, February 12, 2014 9:56:52 AM
> > Subject: Re: [Users] [ovirt-test-day-2] Testing all-in-one f
On Tue, 11 Feb 2014 17:57:52 -0500 (EST)
Greg Sheremeta wrote:
> I'm having a tough time getting a VM console working via VNC. I set a VM to
> use VNC, and I installed virt-viewer.
>
> 1. When I try to open a .vv file with virt-viewer, I get an error "Cannot
> find guest domain /var/tmp/consol
- Original Message -
> From: "Michal Skrivanek"
> To: "Greg Sheremeta"
> Cc: "users"
> Sent: Wednesday, February 12, 2014 10:43:18 AM
> Subject: Re: [Users] test day help -- console
>
>
>
> On 11 Feb 2014, at 23:57, Greg Sheremeta wrote:
>
> > I'm having a tough time getting a VM co
- Original Message -
> From: "Trey Dockendorf"
> To: "Itamar Heim"
> Cc: "users"
> Sent: Monday, February 10, 2014 3:03:05 AM
> Subject: Re: [Users] Host Non-Operational from sanlock and VM fails to
> migrate
>
> No, in fact I just had the issue arise again after trying to figur
Thanks Alon, I noted the same on the github mirror.
Do you then manually run the java install as part of another process?
Regard,
David
On 12/02/14 9:59 pm, Alon Bar-Lev wrote:
Hi,
We use the following one[1], it contains several fixes.
Regards,
Alon
[1]
http://gerrit.ovirt.org/gitweb?p=r
Hi,
We use the following one[1], it contains several fixes.
Regards,
Alon
[1]
http://gerrit.ovirt.org/gitweb?p=releng-tools.git;a=tree;f=specs/jasperreports-server;hb=HEAD
- Original Message -
> From: "David Young"
> To: users@ovirt.org
> Sent: Wednesday, February 12, 2014 10:55:17
Hi users,
I'm not an oVirt user (yet), but while working on another project, I
stumbled across:
https://github.com/oVirt/jasperreports-server-rpm
And found the spec file and patches which built an RPM for packaging of
the JasperReports Server WAR installation. This is presumably a
component
Hello Neil,
- reversed screen is unfortunately a bug of spice-html5.
- about the ctrl-alt-del - which oVirt are you using? this issue should be
solved in oVirt 3.4 - ctrl-alt-del button should be present in the client page.
Cheers,
Frank.
- Original Message -
From: "Neil Schulz"
To:
On 11 Feb 2014, at 23:57, Greg Sheremeta wrote:
> I'm having a tough time getting a VM console working via VNC. I set a VM to
> use VNC, and I installed virt-viewer.
>
> 1. When I try to open a .vv file with virt-viewer, I get an error "Cannot
> find guest domain /var/tmp/console.vv"
Old vi
- Original Message -
> From: "Karli Sjöberg"
> To: d...@redhat.com
> Cc: ih...@redhat.com, users@ovirt.org
> Sent: Wednesday, February 12, 2014 9:56:52 AM
> Subject: Re: [Users] [ovirt-test-day-2] Testing all-in-one feature on f19
>
> On Wed, 2014-02-12 at 02:51 -0500, Yedidyah Bar David
Hi Greg,
ad 1,2: what virt-viewer version are you using? old clients don't have support
for connecting with .vv file.
ad 3: have you websocket proxy up and running on your engine? in case you
configured websocket proxy in engine-setup, have you imported engine's CA in
your browser?
Also - did S
Hello,
so far I'm using the nodes host IP@/Interface as well as for the ovirtmgmt
network and host communication.
For performance/security reasons I'd like to move it into private network,
dedicated to oVIRT.
Do I have to change the IP@ in the definition Cluster/Hosts to the new
ovirtmgmt IP@
Thank you Doron!
I will update the wiki soon.
Tomas
- Original Message -
> From: "Doron Fediuck"
> To: "users" , "engine-devel"
> Cc: "Tomas Jelinek"
> Sent: Tuesday, February 11, 2014 5:42:49 PM
> Subject: Spice proxy test day support
>
> Hi all,
> I was testing this feature today a
1 - 100 of 101 matches
Mail list logo
