Hi Sahina,
Le 19/01/2016 07:02, Sahina Bose a écrit :
The steps to make sure gluster uses separate network for data traffic :
1. Create a logical network (non-VM), and mark it's role as "Gluster"
2. After adding the host via the ovirtmgmt hostname/ ip address, assign
this gluster network to you
On 01/18/2016 07:26 PM, Fil Di Noto wrote:
I'm having trouble setting up a dedicated storage network.
I have a separate VLAN designated for storage, and configured separate
IP addresses for each host that correspond to that subnet. I have
tested this subnet extensively and it is working as exp
On 01/18/2016 03:37 PM, Nathanaël Blanchet wrote:
Sorry, I'm only able to provide engine.log, because the host has
already been resintalled.
Thank you.
Was the host that you were trying to remove, "khamsin" correspond to
10.34.100.41 ? (10.34.100.41 is reported as DISCONNECTED in gluster pe
If the engine wasn't able to copy back host-deploy logs, you can also find them
under /tmp/ on the host.
Can you please try to look for them and attach here?
i've checked the /tmp directory on the host but no host-deploy logs created
there during the host installation on ovirt manager yes
Hi, Ondra
It works, thanks.
Jian
On 01/18/2016 07:44 PM, Ondra Machacek wrote:
Hi Jian,
if you select your DataCenter in tree pane on the left,
then you will see 'Quota' tab between main tabs.
Ondra
On 01/18/2016 02:23 AM, zhangjian2011 wrote:
Hi, Ondra
If I set DataCenter 's Q
You can always overcommit, so hard to tell when no resources are left.
You can use quote to limit to physical resources.
Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
Tel : +972 (9) 7692306
8272306
Email: yd...@re
Hi All
My team is currently building an application based on the oVirt REST
API, and we noticed that it is possible to create a VM with resources
(i.e. RAM or CPU) that are not physically available in the cluster.
Running the VM will fail with an appropriate error message, but for
our use case it
Hi,
You cannot see it only in UserPortal or also in Webadmin?
Can you please send engine.log?
Maybe you hit same issue as described here[1].
Ondra
[1] http://lists.ovirt.org/pipermail/users/2016-January/037313.html
On 01/18/2016 05:24 PM, Johan Vermeulen wrote:
Hello All,
I have installed a
Hi,
I can see that 'ovirt-engine-aaa-ldap-setup' successfully connect to
'ldap://bbgpvmas100.prozess.bbg:389', but later it says connection
refused on to 'bbgpvmas100.prozess.bbg/10.157.8.25:389'.
Don't you have more 'A' records set for 'bbgpvmas100.prozess.bbg'?
Can you please assure that yo
On Mon, Jan 18, 2016 at 6:06 PM, Gianluca Cecchi
wrote:
>
> Il 18/gen/2016 17:55, "Simone Tiraboschi" ha
> scritto:
> >
> >
> >
> > On Mon, Jan 18, 2016 at 5:41 PM, Gianluca Cecchi <
> gianluca.cec...@gmail.com> wrote:
> >>
> >> Hell,
> >> tried old link
> >>
> http://jenkins.ovirt.org/job/ovirt
Il 18/gen/2016 18:13, "Simone Tiraboschi" ha scritto:
>
>
>
> On Mon, Jan 18, 2016 at 6:06 PM, Gianluca Cecchi <
gianluca.cec...@gmail.com> wrote:
>>
>>
>> Il 18/gen/2016 17:55, "Simone Tiraboschi" ha
scritto:
>> >
>> >
>> >
>> > On Mon, Jan 18, 2016 at 5:41 PM, Gianluca Cecchi <
gianluca.cec...@
Il 18/gen/2016 17:55, "Simone Tiraboschi" ha scritto:
>
>
>
> On Mon, Jan 18, 2016 at 5:41 PM, Gianluca Cecchi <
gianluca.cec...@gmail.com> wrote:
>>
>> Hell,
>> tried old link
>>
http://jenkins.ovirt.org/job/ovirt-appliance-engine_master_create-rpms-el7-noarch_merged/
>
>
>
http://jenkins.ovirt.o
On Mon, Jan 18, 2016 at 5:41 PM, Gianluca Cecchi
wrote:
> Hell,
> tried old link
>
> http://jenkins.ovirt.org/job/ovirt-appliance-engine_master_create-rpms-el7-noarch_merged/
>
http://jenkins.ovirt.org/job/ovirt-appliance_master_build-artifacts-el7-x86_64/
>
> got 404.
> Is it temporary due to
Hell,
tried old link
http://jenkins.ovirt.org/job/ovirt-appliance-engine_master_create-rpms-el7-noarch_merged/
got 404.
Is it temporary due to some problem or did the link change where I can get
the appliance for HE with master packages in it?
I would like to see how Italian layout is, now that fi
Hi,
please attach logs.
Btw if you are using oVirt 3.6.1 upgraded from 3.6.0, you
may suffer from [1]. If that's the case, you will find
in your engine log following error:
Error in activating extension 'internal-authn': Database schema is older
than required by currently installed
If you
Hello All,
I have installed an all-in-one server on a Centos7 machine, with one vm.
After updating to Centos7.2 ( Ovirt 3.6 ) I cannot login on
user portal of web portal because I cannot set the profile field.
So it complains the field cannot be left blanc.
This is a test setup so no biggie.
Tha
Hi List,
I'm running ovirt 3.5.6.2.
Why do i have to restart a vm when i set a custom property?
Thanks!
Christian
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
On 01/18/2016 03:39 PM, Algirdas Žemaitis wrote:
> Hello,
>
>
>
> It seems ovirt API lacks of possibility to define storage domain, in
> which cloned vm (from snapshot) will be created, is it done on purpose,
> or it is just missing/under development ?
>
>
>
> Scenario using WEB GUI :
>
>
On 01/18/2016 02:49 PM, Algirdas Žemaitis wrote:
> Hello,
>
>
> I was playing with Ovirt API/python-sdk for a week or so and stuck in
> one from first sight simple yet unsolvable spot…
>
> Ovirt web GUI has option to clone VM from snapshot, to new(other)
> storage domain. Is it possible to do so
Hi Alireza
Me and Martin Perina are in charge of Power Management issues in oVirt
Please let us know if your problem is solved or attach the relevant logs for
investigation
Thanks
- Original Message -
> From: "combuster"
> To: "alireza sadeh seighalan" , users@ovirt.org
> Sent: Monda
Hello,
It seems ovirt API lacks of possibility to define storage domain, in which
cloned vm (from snapshot) will be created, is it done on purpose, or it is just
missing/under development ?
Scenario using WEB GUI :
Create snapshot of any running VM, right-click on snapshot, select “clone”
In po
oVirt is still managing the cluster via ovirtmgmt network. The same rule
applies for tagging networks as VM networks, Live Migration networks
etc. Gluster is no different, except that it involved a couple of manual
steps for us to configure it.
On 01/18/2016 03:53 PM, Fil Di Noto wrote:
Thank
Thanks I will try this. I am running ovirt-engine 3.6.1.3-1.el7.centos
In the configuration described, is oVirt able to manage gluster? I am
confused because if oVirt knows the nodes by their ovirtmgmt network
IP/hostname aren't all the VDSM commands going to fail?
On Mon, Jan 18, 2016 at 6:39
On Mon, Jan 18, 2016 at 4:28 PM, Nathanaël Blanchet wrote:
> Hello,
>
> My internal domain is not available anymore in the webadmin login and any
> query with admin@internal fail.
> What can I do to recover it?
You can try running engine-setup.
Check also:
https://bugzilla.redhat.com/show_bug.c
Hello,
I'm also running in problemes moving to the new ldap authentification.
Different to Davids issue, I'm running IPV4 and I'm using SAMBA 4 as AD server.
Here we go with the output:
ovirt-engine-extension-aaa-ldap-setup
[ INFO ] Stage: Initializing
[ INFO ] Stage: Environment setup
Hi Fil,
this worked for me a couple of months back:
http://lists.ovirt.org/pipermail/users/2015-November/036235.html
I'll try to set this up again, and see if there are any issues. Which
oVirt release are you running ?
Ivan
On 01/18/2016 02:56 PM, Fil Di Noto wrote:
I'm having trouble sett
Hello,
My internal domain is not available anymore in the webadmin login and
any query with admin@internal fail.
What can I do to recover it?
--
Nathanaël Blanchet
Supervision réseau
Pôle Infrastrutures Informatiques
227 avenue Professeur-Jean-Louis-Viala
34193 MONTPELLIER CEDEX 5
Tél.
On Mon, Jan 18, 2016 at 8:20 AM, Jaicel wrote:
> 2016-01-18 14:59:25,321 INFO
> [org.ovirt.engine.core.uutils.ssh.SSHDialog]
> (org.ovirt.thread.pool-8-thread-31) SSH execute root@192.168.208.21
> 'umask 0077; MYTMP="$(TMPDIR="${OVIRT_TMPDIR}" mktemp -d -t
> ovirt-XX)"; trap "chmod -R u+
I'm having trouble setting up a dedicated storage network.
I have a separate VLAN designated for storage, and configured separate
IP addresses for each host that correspond to that subnet. I have
tested this subnet extensively and it is working as expected.
Prior to adding the hosts, I configured
Hi Everyone,
I wanna use oVirt engine 3.6 in my Internet _connectionless_ network. I
installed oVirt with yum over internet. After that I tried to work offline.
When I go offline it still works fine. But Web I connect it to my local
netowork Interface starts not to respond. I check POST/GET reque
Hi,
you need at least two servers in the cluster for pm test to succeed. If
you do, make sure that IP address of the iLO is pingable from all hosts
in the cluster. oVirt engine log would also help in troubleshooting the
issue.
On 01/18/2016 02:10 PM, alireza sadeh seighalan wrote:
hi every
Hi All,
For a long time now we have been using the whiteboard free-text field to
set the team that owns each ticket in Bugzilla. This causes several issues:
- The usage was not documented.
- We had issue reporting on that field.
- People can make mistakes setting it (mis-spelling the team for examp
Hi Jian,
if you select your DataCenter in tree pane on the left,
then you will see 'Quota' tab between main tabs.
Ondra
On 01/18/2016 02:23 AM, zhangjian2011 wrote:
Hi, Ondra
If I set DataCenter 's Quota Mode to Disabled, then the quota
tab will be hidden as below.
(the quota ta
On Tue, Jan 05, 2016 at 02:27:26PM -0500, Martin Perina wrote:
> please make sure that on your machine you installed correct oVirt
> repositories [1]. slf4j package is available for EL6 in oVirt 3.6
> repo [2].
Thanks for the pointer. And... well, sorry for wasting your time. It was not
working fo
On Wed, Jan 13, 2016 at 7:28 PM, Joop wrote:
> On 13-1-2016 18:02, Doron Fediuck wrote:
> > In the past we had Joop coming with his cool setup.
> > We used it in the booth to demo live migration.
> >
> Is that an invitation to come and bring my stuff :-)
>
> > Does anyone wish to do the same this
Le 17/01/2016 16:38, Dan Kenigsberg a écrit :
On Fri, Jan 15, 2016 at 05:02:13PM +0100, Nathanaël Blanchet wrote:
Why is it forbiden to add an address (static or dhcp) to bridge on a host
that runs a vm which is connected to that bridge?
As a workaround, I can put manually an address for that
It does look like one. Could you attach engine log and vdsm logs from
the server where engine issued the peer detach?
On 01/15/2016 09:28 PM, Nathanaël Blanchet wrote:
Hi all,
When I want to remove an host from a gluster cluster, engines tells me
that it fails to remove the host.
Once I run
37 matches
Mail list logo
