On Thu, Oct 27, 2016 at 4:28 AM, Thing wrote:
> Hi,
>
> I have 3 machines imported into ovirt 4.0.4 just to do storage. I have no
> storage setup. I am a bit confused, can I add new storage from scratch via
> ovirt? ie picking mount points (I have /gv1 so set on each) or
On Fri, Oct 28, 2016 at 8:14 AM, Thing wrote:
> Hi,
>
> So was was trying to make a 3 way mirror and it reported failed. Now I
> get these messages,
>
> On glusterp1,
>
> =
> [root@glusterp1 ~]# gluster peer status
> Number of Peers: 1
>
> Hostname: 192.168.1.32
>
Hi,
So was was trying to make a 3 way mirror and it reported failed. Now I get
these messages,
On glusterp1,
=
[root@glusterp1 ~]# gluster peer status
Number of Peers: 1
Hostname: 192.168.1.32
Uuid: ef780f56-267f-4a6d-8412-4f1bb31fd3ac
State: Peer in Cluster (Connected)
Hi,
I have 3 gluster nodes running,
==
[root@glusterp1 ~]# gluster peer status
Number of Peers: 2
Hostname: 192.168.1.33
Uuid: 0fde5a5b-6254-4931-b704-40a88d4e89ce
State: Peer in Cluster (Connected)
Hostname: 192.168.1.32
Uuid: ef780f56-267f-4a6d-8412-4f1bb31fd3ac
State: Peer in Cluster
So far from reading it appears this only applies to "proper" servers? ie
without a iLo card there is nothiing to do?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Hi, after 2 hours of repeatedly rebooting glusterp2 (8 odd times) and the
ovirt server itself twice after the second reboot of the ovirt server I
managed to get glusterp2 into maintenance mode and re-install it, which
cleared the issue. I still dont know why it failed, nor why it took so
long
That makes sense, but it is also disappointing to realize that oVirt
Manager will only trust certificates that itself has issued, and that there
is no support for Manager to trust VDSM server certificates issued by
another authority.
If I understand you correctly, then the *only* way to install a
Since you replace ca.pem you need to replace the private key of ca.pem
Please copy the private key of /etc/pki/ovirt-engine/ca.pem to
/etc/pki/ovirt-engine/private/ca.pem and let me know if everything works
On Thu, Oct 27, 2016 at 2:47 PM, Kenneth Bingham wrote:
>
> Thanks Ravi,
I might have mixed up some items here, please ignore my previous email
and thank you for the info on setting the option to let ovirt use
hostnames
I think i have been looking at the screen for too long.
thanks!
Roy Golan schreef op 2016-10-27 14:23:
On 27 October 2016 at 10:42,
Thanks Ravi, that's helpful and I appreciate the precision and attention to
detail. I performed similar steps to install a custom certificate for the
oVirt Manager GUI. But what about configuring ovirt-engine to trust a
certificate issued by the same CA and presented by the VDSM host? On the
Here is a complete set of instructions that works for me
You can skip the first few steps of generating the certificate.
Ravi
Generate a self-signed certificate using openssl
==
openssl req -x509 -sha256 -nodes -days 365 -newkey rsa:2048 -keyout
Hi,
I am building my first ovirt system and I am wondering about the state
of my system. I think it should be different than what it is right now. If
any one has advice, opinions or thought I am open to hearing. Sorry If I
have some of the terminology wrong).
I am try to building a 3 node
On Thu, Oct 27, 2016 at 10:05 AM, Bryan Sockel
wrote:
> Hi,
>
> We currently have our HostedEngine VM running on a gluster Replica 3
> storage domain. Is there a way to modify the mount options in oVirt to
> specify the Backup-Volfile servers?
>
>
I think all steps needed
Hi,
We currently have our HostedEngine VM running on a gluster Replica 3 storage
domain. Is there a way to modify the mount options in oVirt to specify the
Backup-Volfile servers? ___
Users mailing list
Users@ovirt.org
On Thu, Oct 27, 2016 at 4:11 PM, Maton, Brett
wrote:
> I just tried a yum update and got a key error, has it changed or is this a
> problem?:
>
> warning:
> /var/cache/yum/x86_64/7/ovirt-4.0-pre/packages/mom-0.5.8-1.el7.centos.noarch.rpm:
> Header V3 RSA/SHA1
I just tried a yum update and got a key error, has it changed or is this a
problem?:
warning:
/var/cache/yum/x86_64/7/ovirt-4.0-pre/packages/mom-0.5.8-1.el7.centos.noarch.rpm:
Header V3 RSA/SHA1 Signature, key ID 1efa001d: NOKEY
Public key for mom-0.5.8-1.el7.centos.noarch.rpm is not installed
On Thu, Oct 27, 2016 at 1:58 PM, Sebastian Greco
wrote:
> Ohh thx for the answer :) That's why the running VMs on that particular
> storage would only run on that host. One can do that in other hypervisors
> like vsphere or hyper-v. It would be a nice thing to have in
On Thu, Oct 27, 2016 at 3:33 PM, knarra wrote:
> On 10/27/2016 06:42 PM, Simone Tiraboschi wrote:
>
>
>
> On Thu, Oct 27, 2016 at 2:56 PM, knarra wrote:
>
>> Hi Simone,
>>
>> I see that this patch is merged upstream. I have installed latest
>> master.
On 10/27/2016 06:42 PM, Simone Tiraboschi wrote:
On Thu, Oct 27, 2016 at 2:56 PM, knarra > wrote:
Hi Simone,
I see that this patch is merged upstream. I have installed
latest master. But i still see that HostedEngine CPU shows
Hi Roy,
thank you kindly for your response.
what i am trying to do is this.
1) Create a dc 'DC0-aws2'
2) Create a cluster 'CLUSTER0-aws2'
3) Add Host1 'PCB1-0-aws2'
4) Add Host2 'PCB2-0-aws2'
5) Create NFS Storage 'DC0-aws2-NFS'
6) Attach to DC 'DC0-aws2'
My issues are with step 5 and 6 but
On Thu, Oct 27, 2016 at 2:56 PM, knarra wrote:
> Hi Simone,
>
> I see that this patch is merged upstream. I have installed latest
> master. But i still see that HostedEngine CPU shows 100%. Is there
> something i am missing here?
>
So maybe it's an unrelated bug.
Do you
The oVirt Project is pleased to announce the availability of oVirt 4.0.5
fourth release candidate for testing, as of October 27th, 2016.
This release is available now for:
* Fedora 23 (tech preview)
* Red Hat Enterprise Linux 7.2 or later
* CentOS Linux (or similar) 7.2 or later
This release
Hi Simone,
I see that this patch is merged upstream. I have installed latest
master. But i still see that HostedEngine CPU shows 100%. Is there
something i am missing here?
Thanks
kasturi
On 10/19/2016 10:33 PM, Simone Tiraboschi wrote:
On Wed, Oct 19, 2016 at 3:13 PM, knarra
Hi,
I have installed latest upstream master on RHEL7.2. When i try to
put a host in maintenance which runs HE vm i see that vm does not get
migrated to another host and host is stuck in "preparing for maintenace"
state. I see the following errors in the vdsm.log . Can you please help
me
On 27 October 2016 at 10:42, wrote:
> Hi All, i have two ovirt / fakevdsm questions.
>
> I am using fakevdsm to test my ovirt 4.0.5 engine.
> I have a somewhat awkward setup where i have a relatively large amount of
> dc's.
I cannot get nfs master domain to work from the
Ohh thx for the answer :) That's why the running VMs on that particular
storage would only run on that host. One can do that in other hypervisors
like vsphere or hyper-v. It would be a nice thing to have in rhv too imho.
On Thu, Oct 27, 2016 at 12:44 PM, Elad Ben Aharon
On Thu, Oct 27, 2016 at 12:32 PM, Jonas Israelsson <
jonas.israels...@elementary.se> wrote:
> I could indeed, the issue I saw yesterday is resolved already. I was
> merely thinking we might have a potential single point of failure here.
> While the primary nameserver was offline the machine
Can you try if these settings inside /etc/resolv.conf can make oVirt
engine web uo work better?
options rotate
options timeout:1
options attempts:1
Please note that nslookup and dig commands seem not to go through
these settings if you change them.
But if you use eg ping command you can see
On Thu, Oct 27, 2016 at 11:42 AM, Jonas Israelsson <
jonas.israels...@elementary.se> wrote:
>
> Well it's not like the machine (nor oVirt) doesn’t have a working DNS. My
> point is, I'm under the impression it only uses one (the first) from
> resolv.conf and ignores the rest.
>
> Rgds,
> Jonas
>
Unfortunatelly no, we decided to use UPN instead of SAM account name,
because SAM account name is limit IIRC to 15 characters, while UPN is
not limited.
On 10/26/2016 08:58 PM, Beckman, Daniel wrote:
That’s it! Some background: within our IT department most of us have a regular
user account
On Thu, Oct 27, 2016 at 12:22 PM, Chris Cowley
wrote:
> Simple question:
>
> Is there a better way of uploading a disk to a storage domain than through
> my browser?
>
Soon you will be able to do that using the REST API or JDK if that fits
your needs better. What
On 27/10/16 11:34, Simone Tiraboschi wrote:
On Thu, Oct 27, 2016 at 10:17 AM, Jonas Israelsson
> wrote:
Greetings.
We are under the impression if the machine that runs the
oVirt-engine looses it's primary
On Wed, Oct 26, 2016 at 3:48 PM, Anzar Sainudeen
wrote:
> Dear Yanir,
>
>
>
> Thank you for your fast reply.
>
> My current ovirt node version is 4.0.3. Please let me know the next which
> version release will resolve the error ‘The host hosted_engine_2 did not
> satisfy
On 10/27/2016 02:56 PM, Jorick Astrego wrote:
On 10/20/2016 03:14 PM, Alexander Wels wrote:
On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote:
On 10/18/2016 03:59 PM, Michal Skrivanek wrote:
On 18 Oct 2016, at 15:56, Alexander Wels wrote:
On Tuesday,
On Thu, Oct 27, 2016 at 10:17 AM, Jonas Israelsson <
jonas.israels...@elementary.se> wrote:
> Greetings.
>
> We are under the impression if the machine that runs the oVirt-engine
> looses it's primary nameserver, the oVirt web-ui becomes more or less
> unresponsive.
>
> By primary I mean the
Le 27/10/2016 à 00:14, Kenneth Bingham a écrit :
I did install a server certificate from a private CA on the engine
server for the oVirt 4 Manager GUI, but haven't figured out how to
configure engine to trust the same CA which also issued the server
certificate presented by vdsm. This is
On 10/20/2016 03:14 PM, Alexander Wels wrote:
> On Thursday, October 20, 2016 9:20:23 AM EDT Jorick Astrego wrote:
>> On 10/18/2016 03:59 PM, Michal Skrivanek wrote:
On 18 Oct 2016, at 15:56, Alexander Wels wrote:
On Tuesday, October 18, 2016 3:44:31 PM EDT
Simple question:
Is there a better way of uploading a disk to a storage domain than through
my browser?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Greetings.
We are under the impression if the machine that runs the oVirt-engine
looses it's primary nameserver, the oVirt web-ui becomes more or less
unresponsive.
By primary I mean the nameserver at the top of resolv.conf
In 3.x it was a disaster, 4.0 is far better, but for instance
Hi,
Is there a technical reason for not being able to use the local host
storage if that host is already in a cluster with shared storage?
For instance, if a user has a server with with a lot of storage and he
wants to use that storage for non HA VMs that will only run over that host
while, that
Hi All, i have two ovirt / fakevdsm questions.
I am using fakevdsm to test my ovirt 4.0.5 engine.
I have a somewhat awkward setup where i have a relatively large amount
of dc's.
I cannot get nfs master domain to work from the api.
The api code is solid and is used on a ovirt-engine 3.5
Hello Kenneth,
Le 26/10/2016 à 20:38, Kenneth Bingham a écrit :
Is it possible to "pivot" up or down guests from one instance of Manager
to another instance of Manager by detaching the data storage domain from
the source Manager's data center and attaching it to the destination
Manager's data
42 matches
Mail list logo