On Wed, Apr 22, 2020 at 2:17 AM Strahil Nikolov wrote:
>
> On April 22, 2020 12:41:49 AM GMT+03:00, "Maton, Brett"
> wrote:
> >Last time I had to forcibly remove a node because it was impossible to
> >do
> >so otherwise, it had never ever had anything to do with gluster, so I
> >STRONGLY dispute
Hi all,
I was wondering if it's "safe" disabling entirely the firewalld service and
manage the firewall only via iptables, on the host and on the hosted engine (a
self-hosted engine). It would make a lot easier the managing the firewall rules
for me because of many automatisms I created based o
On April 22, 2020 12:41:49 AM GMT+03:00, "Maton, Brett"
wrote:
>Last time I had to forcibly remove a node because it was impossible to
>do
>so otherwise, it had never ever had anything to do with gluster, so I
>STRONGLY dispute your claim that fixing an issue (that was not stated)
>will
>fix anyt
Last time I had to forcibly remove a node because it was impossible to do
so otherwise, it had never ever had anything to do with gluster, so I
STRONGLY dispute your claim that fixing an issue (that was not stated) will
fix anything.
On Tue, 21 Apr 2020 at 22:39, Maton, Brett wrote:
> I'm sorry
I'm sorry there was no suggestion that the node had anything to do with
gluster, clearly stated but how to remove a dead and unmanageable node from
the cluster.
On Tue, 21 Apr 2020 at 20:41, Strahil Nikolov wrote:
> Not a good approach.
> It's important to know if the node was also a gluster pee
Not a good approach.
It's important to know if the node was also a gluster peer in the storage pool
- if yes, it needs to be replaced with 'replace-brick' or 'reset-brick'
(depending if you use the old hostname or not).
Once the storage node is replaced - oVirt will allow you to remove it.
Best
Thanks Anton,
I received the 2 links and will keep and eye on them.
Regards,
Adrian
On Tue, Apr 21, 2020 at 1:19 PM Anton Marchukov wrote:
> Hello Adrian.
>
> Thanks for your help with mirroring. I have forwarded your messages to the
> ticketing system our infra team uses. You should get back
On April 21, 2020 2:57:13 PM GMT+03:00, Jayme wrote:
>What is the vm optimizer you speak of?
>
>Have you tried the high performance vm profile? When set it will prompt
>you
>to make additional manual changes such as configuring numa and
>hugepages
>etc
>
>
>
>On Tue, Apr 21, 2020 at 8:52 AM wrote
Hello Adrian.
Thanks for your help with mirroring. I have forwarded your messages to the
ticketing system our infra team uses. You should get back two links: one
for the ticket about our mirroring docs being outdated (we need to fix
them) and the second one is about your mirroring request. Our inf
Last time I had to do this I removed from the database.
(at your own risk)
On ovirt engine switch to the postgres user from root:
su - postgres
Enable postgres 10 and connect to the engine database:
. scl_source enable rh-postgresql10
psql -d engine
Change to the name (Name column of the host
On April 21, 2020 5:15:10 PM GMT+03:00, Shareef Jalloq
wrote:
>Hi,
>
>I seem to have got a stale host in my engine that I can't remove. I
>recently reinstalled oVirt Node on this host and while trying to
>refresh
>the host in the engine, have got it in some state where I can't do
>anything.
>
>T
Hi,
I seem to have got a stale host in my engine that I can't remove. I
recently reinstalled oVirt Node on this host and while trying to refresh
the host in the engine, have got it in some state where I can't do anything.
The host is listed as Status=Unassigned. Under the Management pull down I
On Tue, 2020-04-21 at 12:48 +, Anton Louw wrote:
>
>
> Hi Everybody,
>
>
Hi Anton,
> Has anybody gone the route of using KeyCloak to login to oVirt?
> KeyCloak has been configured and the neccesary configs have also been
> done on the engine. It redirects perfectly from the oVirt Web Login
Hi Everybody,
Has anybody gone the route of using KeyCloak to login to oVirt? KeyCloak has
been configured and the neccesary configs have also been done on the engine. It
redirects perfectly from the oVirt Web Login page to KeyCloak, but after
logging into KeyCloak, I get redirected back to the
Hi Barak,
Thanks for the info, we have opened a request/email using that link since a few
months ago, however no one has reached out back to us.
Anything else we can do from our end?
thanks,
Adrian
___
Users mailing list -- users@ovirt.org
To unsubscr
Didn't recieve the forwarded email. Could you send it to si...@weblink.se
please? Thanks,
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt C
Hi,
On Tue, Apr 21, 2020 at 11:43:48AM -, ozme...@hotmail.com wrote:
> my first problem is hook file.
> When i add file before_vm_start directory and restart engine,
> it shows under host hooks file on the web page. But options
> cannot be displayed under vm custom properties section
>
> if i
Hi,
On Tue, Apr 21, 2020 at 11:45:34AM +0200, Gianluca Cecchi wrote:
> On Tue, Apr 21, 2020 at 11:10 AM Victor Toso wrote:
>
> [snip]
>
> > For mjpeg encoding, you don't need to change anything. For
> > x264/vp8 with GStreamer, spice must be built with GStreamer
> > option enabled. You can chec
What is the vm optimizer you speak of?
Have you tried the high performance vm profile? When set it will prompt you
to make additional manual changes such as configuring numa and hugepages
etc
On Tue, Apr 21, 2020 at 8:52 AM wrote:
> On oVirt 4.3. i installed w10_64 with q35 cpu.
> i've used v
On oVirt 4.3. i installed w10_64 with q35 cpu.
i've used vm optimizer for better performans for end-users. it seams good.
But i need more performance guidelines.
Ex.
Our system has FC storage, is tere any options for better read/write
performans, Hugepage, write through
Like this, if you have any
my first problem is hook file.
When i add file before_vm_start directory and restart engine, it shows under
host hooks file on the web page. But options cannot be displayed under vm
custom properties section
if i set spiceoptions ;
engine-config -s UserDefinedVMProperties=spiceoptions=^.*$ --cv
On Tue, Apr 21, 2020 at 11:10 AM Victor Toso wrote:
[snip]
> For mjpeg encoding, you don't need to change anything. For
> x264/vp8 with GStreamer, spice must be built with GStreamer
> option enabled. You can check if that's the case for your spice
> server library by running ldd in the .so file,
Hi,
On Tue, Apr 21, 2020 at 07:42:20AM -, ozme...@hotmail.com wrote:
> So, can you discribe how can i use streaming method on Ovirt
> 4.3?
Looking at the hook you posted earlier:
https://github.com/oVirt/vdsm/blob/master/vdsm_hooks/spiceoptions/before_vm_start.py
It needs user to p
So, can you discribe how can i use streaming method on Ovirt 4.3?
do i need to change something on host or engine
I need to solve youtube or other video problems
Additionally, steraming needs to hardware accelerator, all streaming apps or
offers hardware acceletor for best performace
thanks
___
24 matches
Mail list logo