[ovirt-users] Storage Domain won't activate

I recently removed a host from my cluster to upgrade it to 4.4, after I removed the host from the datacenter VMs started to pause on the second system they all migrated to. Investigating via the engine showed the storage domain was showing as "unknown", when I try to activate it via the engine

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

Sverker, thanks! On Thu, Sep 3, 2020 at 6:50 PM Sverker Abrahamsson wrote: > Hi Dominik, > bug filed at https://bugzilla.redhat.com/show_bug.cgi?id=1875520. I'm > doing a new install to get fresh vdsm and supervdsm logs which will be > attached as soon as they've failed. > /Sverker > Den

[ovirt-users] Re: VM HostedEngine is down with error

What about the gluster logs ? Best Regards, Strahil Nikolov В четвъртък, 3 септември 2020 г., 20:57:05 Гринуич+3, souvaliotima...@mail.com написа: Thank you very much for your reply. I checked the NTP and realized the service wasn't working properly on two of the three nodes, but

[ovirt-users] Re: VM HostedEngine is down with error

Thank you very much for your reply. I checked the NTP and realized the service wasn't working properly on two of the three nodes, but despite that the clocks seemed to have the correct time(date and hwdate). I switched to chronyd and stopped the ntpd service and now it seems the servers'

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

On Thu, Sep 3, 2020 at 12:42 PM Sverker Abrahamsson wrote: > Hi Ales, > this is a CentOS 8 so my impression was that you always have > NetworkManager then? At least my attempt to remove it failed miserably. > Yes, on CentOS 8 hosts oVirt requires the interfaces managed by NetworkManager. >

[ovirt-users] Re: Upgrade 4.3 to 4.4 node to manager communication error

Le 03/09/2020 à 15:49, Martin Perina a écrit : > > > On Thu, Sep 3, 2020 at 2:56 PM Pierre pit > wrote: > > I have a communication problem between all the nodes and the > manager following the upgrade from 4.3 to 4.4. I followed the > procedure of

[ovirt-users] Failed to connect to server (code: 1006) connecting to second host noVNC console

Hi All, Using OLVM and having an issue connecting to a noVNC console on a secondary host. Im getting the Failed to connect. We are using the standalone host as the deployment of the self hosted kept failing, something about the machine not being able to run virtualised machines even though it

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

# yum install network-scripts # readlink $(readlink $(which ifup)) /etc/sysconfig/network-scripts/ifup #touch /etc/sysconfig/disable-deprecation-warnings #systemctl disable NetworkManager Add "NM_CONTROLLED" to the ifcfg- file. #systemctl enable --now network For more details: 

[ovirt-users] Re: [ovirt 4.2]The snapshot is deleted after restoring the snapshot

If you have snapshots like A -> B -> C and you restore A , it is normal to loose B & C. After all when you restore A , B & C never happened. Otherwise , ovirt should clone the snapshots in separate images and that is not the requested, right ? Best Regards, Strahil Nikolov В четвъртък, 3

[ovirt-users] Re: Upgrade 4.3 to 4.4 node to manager communication error

On Thu, Sep 3, 2020 at 4:49 PM Martin Perina wrote: > > > > On Thu, Sep 3, 2020 at 2:56 PM Pierre pit wrote: >> >> I have a communication problem between all the nodes and the manager >> following the upgrade from 4.3 to 4.4. I followed the procedure of update >> 4.3 to 4.4 everything worked

[ovirt-users] Re: Upgrade 4.3 to 4.4 node to manager communication error

On Thu, Sep 3, 2020 at 2:56 PM Pierre pit wrote: > I have a communication problem between all the nodes and the manager > following the upgrade from 4.3 to 4.4. I followed the procedure of update > 4.3 to 4.4 everything worked correctly, according to the import export > scripts as well as the

[ovirt-users] Upgrade 4.3 to 4.4 node to manager communication error

I have a communication problem between all the nodes and the manager following the upgrade from 4.3 to 4.4. I followed the procedure of update 4.3 to 4.4 everything worked correctly, according to the import export scripts as well as the installation setup on the new manager in 4.4, all is ok.

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

Hi Ales, this is a CentOS 8 so my impression was that you always have NetworkManager then? At least my attempt to remove it failed miserably. The enp4s0 config was created by the install, so it should be controlled by NetworkManager. /Sverker Den 2020-09-03 kl. 12:29, skrev Ales Musil:

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

On Thu, Sep 3, 2020 at 12:21 PM Sverker Abrahamsson wrote: > Hi Ales, > right now I have a manually created ovirtmgmt bridge (virbr0 and vnet0 > seems to be created during the failed attempt to deploy hosted engine): > > [root@h1-mgmt ~]# nmcli con show > NAME UUID

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

Hi Ales, right now I have a manually created ovirtmgmt bridge (virbr0 and vnet0 seems to be created during the failed attempt to deploy hosted engine): [root@h1-mgmt ~]# nmcli con show NAME  UUID TYPE  DEVICE enp4s0    af7ccb53-011b-4c36-998a-1878b4ae7100 ethernet 

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

On Thu, Sep 3, 2020 at 11:51 AM Sverker Abrahamsson via Users < users@ovirt.org> wrote: > Hi Dominik > That is my issue, I don't get to where I can get the ovirtmgmt bridge > established because vdsm insists on creating it. It used to be possible to > create that bridge statically and vdsm would

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

Hi Dominik That is my issue, I don't get to where I can get the ovirtmgmt bridge established because vdsm insists on creating it. It used to be possible to create that bridge statically and vdsm would just skip it but seems to be broken now. If it would be possible to use OVN for the

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

Hi Strahil, there is nothing wrong with the switch other than that I don't have any control over it so the network setup is as it is. The issue is that vdsm breaks the network setup because it's not flexible enough. /Sverker Den 2020-09-03 kl. 00:47, skrev Strahil Nikolov: What is you

[ovirt-users] Re: Hosted engine install failure: ipv6.gateway: gateway cannot be set if there are no addresses configured

On Wed, Sep 2, 2020 at 10:38 PM Sverker Abrahamsson via Users < users@ovirt.org> wrote: > Well, unforturnatly I don't have a choise since it is out of my control. > I only have one physical network port where the external traffic is > untagged and the internal vlan is tagged. If I could run with

[ovirt-users] Re: Hosted engine + OVN

On Wed, Sep 2, 2020 at 9:08 PM Sverker Abrahamsson via Users < users@ovirt.org> wrote: > Was it ever solved to install hosted engine with ovn? I tried a few > years ago, got it almost to work but then gave up. > OVN works with hosted engine. Please let us know if you have any issues. >

[ovirt-users] [ovirt 4.2]The snapshot is deleted after restoring the snapshot

Dear All: I used ovirt api (POST /ovirt-engine/api/vms/{vm:id}/snapshots) to create several snapshots. When I call the snapshot recovery api (POST /ovirt-engine/api/vms/{vm:id }/snapshots/{snapshot:id}/restore) to restoe the first snapshot, I found that the next few snapshots were

[ovirt-users] Re: How to Backup a VM

> On Sun, Aug 30, 2020 at 7:13 PM > Using export domain is not a single click, but it is not that complicated. > But this is good feedback anyway. > > > I think the issue is gluster, not qemu-img. > > > How did you try? transfer via the UI is completely different than > transfer using the