Ovirtmgmt network is for oVirt management stuff. Usually when you deploy , it
takes curent settings into consideration and then takes the ovirtmgmt and
underlying network settings under it's control.Not all scenarios are supported,
so you have to check it out.A nice point to start from is
I've installed ovirt 4.4.10 several times and found myself not being able to
reach out to the internet to perform updates to the OS or ovirt. When
installing ovirt I've accepted the defaults and found that networking on my
server has stopped working.
I've also noticed that the ovirtmgmt
I've installed ovirt 4.4.10 several times and found myself not being able to
reach out to the internet to perform updates to the OS or ovirt. When
installing ovirt I've accepted the defaults and found that networking on my
server has stopped working.
I've also noticed that the ovirtmgmt
> Only a single default route network is allowed
Check your network. vdsmd service has a preexec which you can run to find which
module is failing.
systemctl cat vdsmd.serviceThen execute the preexec command
Best Regards,Strahil Nikolov
An ovirt-node machine reboots and shows in the
Is your Hypervisor's ssh hardened ?Try without any modifications .
Best Regards,Strahil Nikolov
On Mon, Apr 18, 2022 at 22:33, Jonas wrote:
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy
Thanks Arik for reply.
I want to add enable_large_sys_mem=1 vGPU plugin parameter . How can I do that
with oVirt? Could you please share steps?
-Original Message-
From: Arik Hadas
Sent: Tuesday, April 19, 2022 6:49 PM
To: Sandip Thorat
Cc: users
Subject: Re: [ovirt-users] NVIDIA
On Tue, Apr 19, 2022 at 3:47 PM sandipt--- via Users wrote:
>
> Hi Team,
> NVIDIA vgpu mdev/mediated devices are getting deleted/removed after VM
> shutdown with ovirt. How I can make them persistent even after VM
> shutdown/poweroff ? I want to set some vgpu parameter in file
>
on 2022/4/19 20:12, Rik Theys wrote:
Hi,
You may need to explicitly use the Q35 chipset in your VM for this to
work?
See https://bugzilla.redhat.com/show_bug.cgi?id=1527860
I agreed it was on the right track.
You can select the chipset of your VM in the advanced properties on
the
Hi Team,
NVIDIA vgpu mdev/mediated devices are getting deleted/removed after VM
shutdown with ovirt. How I can make them persistent even after VM
shutdown/poweroff ? I want to set some vgpu parameter in file
/sys/bus/mdev/devices/vgpu-id/nvidia/vgpu_params for testing to mdev. But can't
do
Hi Rik
I got the same problem, have you got it resolved ?
Thanks
Zhijian
Hi,
I'm trying to assign a USB3 controller to a CentOS 7.4 VM in oVirt 4.1
with USB redirection enabled.
I've created the following file in /etc/ovirt-engine/osinfo.conf.d:
01-usb.properties with content
Hi Rik
many thanks for your feedbacks
on 2022/4/19 19:08, Rik Theys wrote:
Hi,
This is supported in newer versions of oVirt than 4.1.
That's strange, i was using ovirt 4.3, I just added below extra
configruation.
[root@d0248f99ff ~]# cat
Hi,
You may need to explicitly use the Q35 chipset in your VM for this to work?
See https://bugzilla.redhat.com/show_bug.cgi?id=1527860
You can select the chipset of your VM in the advanced properties on the
system tab.
Regards,
Rik
On 4/19/22 14:07, Li, Zhijian wrote:
Hi Rik
many thanks
Hi,
This is supported in newer versions of oVirt than 4.1.
Back then, we used a custom hook to replace the USB controller in the
xml file on VM start, but it sometimes caused other issues.
Regards,
Rik
On 4/19/22 12:52, Li, Zhijian wrote:
Hi Rik
I got the same problem, have you got it
On Sat, Apr 16, 2022 at 3:24 AM wrote:
> I just create an new user in ovirt 4.4.10 using the tool
> "ovirt-aaa-jdbc-tool". I'm unable to log into ovirt using the newly
> created user. I'm getting the error message: The user
> xyzabcs@internal-authz with profile [internal] is not authorized to
Hi,
I have an ovirt cluster (4 nodes) and a stand-alone engine.
Last week one of the cluster-members node went to "Non-responsive" status,
because i forgot to renew the host certificate.
On this node's vms now are in "unknown" states. (but running)
How can i stop this vms and how can i start
An ovirt-node machine reboots and shows in the ovirt-manager page:
NonResponsive
Then I went to the Admin console page of this node machine and had the
following error reported：
1.Failed command for onn-pool00-tpool.
2.Insufficient free space: 378895 extents needed, but only 2375 available
16 matches
Mail list logo
