running 4.3.3?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Sandro Bonazzola
Sent: 19 November 2020 10:00
Hi Sandro,
Have you perhaps seen anything in the SOS report that could shed some light on
the issues?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
.
## Make this bigger for busy systems
-b 8192
## Set failure mode to syslog
-f 1
Is it possible to upgrade the node to 4.4 while the engine is still on 4.3?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A
here?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
:
Enabled
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Sandro Bonazzola
Sent: 26 October 2020 15:50
To: Anton
Hi Sandro,
The engine is currently running on 4.3.9.4-1.el7 and the hosts are running
oVirt Node 4.3.8
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
The strange thing is, if I power down a VM and then move it to the new host, I
can power it back up successfully. I need to rebuild a few other hosts, so just
nervous that if I place one of them into maintenance, the VMs are not going to
migrate to the new host.
Anton Louw
Cloud Engineer
should
I just make the jump and rebuild another host that’s CPU is Intel Westmere?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
destination node was not compatible.
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Anton Louw
Sent: 23 October 2020 16
I see no
solution has been posted. The subject of that email is: “VDSM HOST ISSUE -
Message timeout which can be caused by communication issues”
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott
ped. Do you think it is worth a shot increasing the
vdsConnectionTimeout and vdsHeartbeatInSeconds to 40 for testing purposes?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street,
centers are geographically split, could the
“vdsHeartbeatInSeconds” potentially be the issue? Is it safe to increase this
value after I add “vdsHeartbeatInSeconds.type=Integer” into my
engine-config.properties file?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
Hi All,
I would like to deploy a VM that will monitor a specific network. I know in
VMware you can set the port group to allow Promiscuous Mode. Is there something
similar I can do in oVirt?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D
g the FQDN.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
___
Users ma
Hi James,
You can remove the “/24” prefix after the IP address for the management VM. You
will get prompts to add the netmask and gateway after you add the IP address.
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A
=Log_Full --provision-db
--provision-dwh-db --restore-permissions
I ran the second command after I built a new HE from scratch. You just need to
download the backup files from the original and copy them to the new HE before
you restore.
Give it a bash and see if it works for you.
Cheers
Anton
Hi Everybody,
Thanks for all the responses. So I managed to truncate the log. I just want to
make sure, the ‘ovirt-ha-agent’ service is only for the hosted engine correct?
I can still migrate machines between the hosts, so it should then not impact
the VMs?
Thanks
Anton Louw
Cloud Engineer
other nodes, and the broker.log file does not exceed 4GB.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
its in DC2, and this does not happen to any of
the hosts in DC2.
It seems like the Engine loses connectivity to the hosts in DC1, and then
cannot re-establish the connection.
Is there anywhere I can check to get more insight into what is actually
happening?
Thanks
Anton Louw
Cloud Engineer: S
Hi Strahil,
Yeah I figured the same. Thank you.
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Strahil Nikolov
se 7.7.1908 (Core)
KeyCloak –
Server Version
10.0.1
Thanks a lot for your help Artur. Please let me know if you need anything else.
From: Artur Socha
Sent: 19 June 2020 12:39
To: Anton Louw ; users@ovirt.org
Cc: Stephen Hutchinson
Subject: Re: [ovirt-users] KeyCloak Integration
On Fri, 2020-06-19
Yes I didn’t get to the OVN part yet, as I first wanted to test the if the
token can be obtained.
This is the first time we are testing KeyCloak in any environment, so we have
never been able to obtain a token for API access.
Thanks
From: Artur Socha
Sent: 19 June 2020 12:16
To: Anton Louw
;:"access_denied","error":"Cannot authenticate user Invalid scopes:
ovirt-app-api ovirt-ext=token-info:authz-search
ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate
ovirt-ext=token:password-access."}
3) Does it work without OVN integration e
Anton Louw would like to recall the message, "[ovirt-users] KeyCloak
Integration".
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtel
e added into KeyCloak (ovirt-app-api and ovirt-app-admin)
https://blogs.ovirt.org/2019/01/federate-ovirt-engine-authentication-to-openid-connect-infrastructure/
Anybody have any ideas?
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D:
straws here)
I am starting to think that it would just be easier to deploy everything from
scratch, but if anybody has any ideas, I would appreciate it.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford
ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate
ovirt-ext=token:password-access."}”
Does anybody have any idea where this is going wrong?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rut
Thanks Paul,
So the symbolic link has then been removed, as per the below. Not quite sure
where to go from here.
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
environment, there is a shortcut file
(apached-ca.pem) which points to the ca.pem file, but on the environment that
is not working, the apache-ca.pem file is not a shortcut. Could this perhaps be
an issue?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
Hi Kim,
Hopefully 😊 I will still run through a couple of checks, I am sure it is
something small I am missing. Was your issue due to owner and permissions?
Yes, for some of our offerings we do use oVirt.
Anton Louw
Cloud Engineer: Storage and Virtualization
checked the websocket service and config, and it seems to be correct.
The port is also open on the firewall. I can telnet to my FQDN on port 6100.
This is breaking my spirit 😊
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A
first mail, apologies 😊
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Staniforth, Paul
Sent: 12 June 2020
Hi Everybody,
With regards to noVNC, is it a requirement to install the CA into your local
browser? I would like users to access their VM console, but with no additional
work from their side, ie. Downloading the CA and importing it.
Thank you
Anton Louw
Cloud Engineer: Storage and
How will I go about updating the below:
update vds_statistics set ha_global_maintenance=f;
Thank you
-Original Message-
From: Yedidyah Bar David
Sent: 09 June 2020 15:19
To: Anton Louw
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Global Maintenance
On Tue, Jun 9, 2020 at 9:39 AM Anto
ed when I moved my self-hosted engine to a standalone
manager?
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@v
this was changed on the
node networking side, or inside of the VM.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
”, but after learning
the hard way, I would rather not do that again 😊 Any other way anybody knows
of? I want to completely remove it and then reinstall it.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford
smoothly.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Yedidyah Bar David
Sent: 20 May 2020 11:59
To
second lab environment, everything shows as “down”, ie. Hosts, Data Center
and Storage Domains.
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l
the move, where it
says that global maintenance is not enabled. How will this work if the hosted
engine is not sitting on a oVirt node anymore?
Any feedback\suggestions will be greatly appreciated.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
Hi Didi,
So still not sure what the issue was. I did the clean-up again, restored from
the backup and it seems to be working again after a few tweaks.
Thanks
From: Yedidyah Bar David
Sent: 12 May 2020 10:20
To: Anton Louw
Cc: users@ovirt.org
Subject: Re: [ovirt-users] 503 Service Unavailable
iled with error Bad Gateway and code 5050)
2020-05-12 09:58:04,328+02 INFO
[org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-64) [476ee6aa]
Lock freed to
nance
stopped=False
Everything network related seems to run fine, I can connect to the engine via
ssh etc. as well.
From: Yedidyah Bar David
Sent: 12 May 2020 09:26
To: Anton Louw
Cc: users@ovirt.org
Subject: Re: [ovirt-users] 503 Service Unavailable
On Tue, May 12, 2020 at 9:53 AM Anton L
Oh I see, so just the service. Perfect, I will give that a bash as well.
Just running through a couple more things.
Thanks Paul
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley
first test the VDSM and
if that does not work, I will restart the engine.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
something?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Staniforth, Paul
Sent: 29 April 2020 09:28
To
:55
To: Yedidyah Bar David ; Anton Louw
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Re: Move Hosted Engine VM to a different storage
domain
On April 26, 2020 9:39:07 AM GMT+03:00, Yedidyah Bar David
mailto:d...@redhat.com>> wrote:
>On Fri, Apr 24, 2020 at 1:04 PM Anton Louw
>ma
Hi Everybody,
Is there a way to see My Groups through the Web UI? I have tried looking
around, but cannot see anything. Can this only be seen via the backend in the
HE?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N
perhaps give me some guidelines or a process I can
follow?
The reason I need to move the HE VM is because we are decommissioning the
current storage array where the HE VM is located.
Thank you very much
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D
Fantastic, thanks a lot for all your assistance Artur!
From: Artur Socha
Sent: 22 April 2020 14:52
To: Anton Louw ; users@ovirt.org
Subject: Re: [ovirt-users] oVirt and KeyCloak intergration
On Wed, 2020-04-22 at 14:43 +0200, Artur Socha wrote:
On Wed, 2020-04-22 at 12:28 +, Anton Louw
Hi Artur,
You are a champion! I can access oVirt now. Thank you so much.
One last question, can I create additional groups in ie. Read Only, etc? And
then will this be done in KeyCloak or in the oVIrt UI?
Thank you
From: Artur Socha
Sent: 22 April 2020 13:21
To: Anton Louw ; users@ovirt.org
Ok so this is definitely looking better. I get an error, but at least now it is
saying : “The user admin@openidchttp is not authorized to perform login”
This is strange though, because admin in by default should be allowed access?
Anton Louw
Cloud Engineer: Storage and Virtualization
Perfect, I’ll test and let you know.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
From: Artur Socha
Sent
w.
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
___
Users ma
Hi Shani,
Great, thank you very much.
Do you perhaps know if I can access the storage domain if I SSH to a node? For
instance, if I want to access a “datastore” in VMware, I SSH to a host and
select /vmfs/volumes
Is there anything like that available for oVirt?
Thanks
Anton Louw
Cloud
Hi Everybody,
Is there a way to mount an ISO to one of my VMs if I do not have an ISO domain,
but the ISO file is on a Data domain?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street
Hi Everybody,
Does anybody know when we will most likely be able to do a live storage
migration of the Hosted Engine? I've been battling with the backup and restore
way for a couple of days now already, and it is starting to feel like a
fruitless exercise.
Thanks
Anton Louw
Cloud Eng
Hi Everybody,
So I did a full backup of our HE, redeployed and restored. After the restore, I
ran engine-setup on the newly deployed HE. I can access the the environment as
per normal, the only issue is that everything still shows as "down", this
includes hosts and VMs?
Is there something I ne
https://lists.ovirt.org/archives/list/users@ovirt.org/message/NYLHUQPK72QUNLSZB2TMA4RWFOGLNX6P/<https://lists.ovirt.org/archives/list/users@ovirt.org/message/NYLHUQPK72QUNLSZB2TMA4RWFOGLNX6P>
Anton Louw
Cloud Engineer: Storage and Virtualization
_
Hi All,
I am in serious need of some help. We currently have our Hosted Engine running
on a Storage Domain, but that storage Domain is connected to a San that needs
to be decommissioned. What would I need to do in order to get my Hosted Engine
running on a different Storage Domain?
Will I need
of my nodes? I would power up
the old HE, but I have powered it off just before deploying a new HE.
I am having the same issue with a node as well, so if there is a way to remove
the node from the Data Center as well, that would be awesome.
Thanks
Anton Louw
Cloud Engineer: Storage and
Hi,
So I decided to just try the move, but I get the below error:
“Error wwhile executing action: Cannot move virtual disk. The operation is not
supported for HOSTED_ENGINE disks”
Any idea if there is a different way to do this?
Thanks
Anton Louw
Cloud Engineer: Storage and Virtualization
Hi All,
What would be the easiest way to migrate my hosted engine disk from one storage
domain, to another? I see that I can click on the disk, and select move, but
for some reason I feel nervous about it :)
Thanks
___
Users mailing list -- users@ovi
th. I have attached the lines in the text
document.
If anybody could point me in the right direction, it would be greatly
appreciated.
Thank you
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Sc
Hi Yedidyah,
After the fix that Paul pointed out, I can now see the data populating in all
the daily tables.
Thanks for your response
From: Yedidyah Bar David
Sent: 05 March 2020 08:59
To: Staniforth, Paul
Cc: Anton Louw ; users@ovirt.org
Subject: Re: [ovirt-users] Re: Changing the Data
Hi Paul,
That is great news! Thanks so much for the reply.
Cheers
Anton Louw
Cloud Engineer: Storage and Virtualization
__
D: 087 805 1572 | M: N/A
A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg
anton.l...@voxtelecom.co.za
www.vox.co.za
Hi Everybody,
I have a question. When oVirt was deployed in our environment by previous
engineers, the DWH was installed as Basic. I would like to change this to Full,
to get the daily stats, as this is now empty due to the scale. Is this just as
simple as described in the following article:
h
67 matches
Mail list logo