DDR': '172.16.1.11',
>> 'NETMASK': '255.255.255.0',
>> 'NM_CONTROLLED': 'no',
>> 'ONBOOT': 'yes',
>>
:fe2e:6acb/64'],
'mtu': '1500',
'netmask': '255.255.255.255',
'vlanid': 3},
I hope that's enough info, if not I'll post the full config on both when
I can bring it back up.
27;VLAN': 'yes'},
'iface': 'bond0',
'ipv6addrs': ['fe80::210:18ff:fe2e:6acb/64'],
'mtu': '1500',
'netmask': '255.255.255.255
Andrew Lau kirjoitti 1.12.2013 kello 4.55:
> p.s. can anyone also confirm, does gluster support multi pathing by default?
> If I'm using this keepalived method, am I bottle necking myself to one host?
If you are using native GlusterFS, either FUSE or libgfapi, then client only
fetches volume
0. Any other changes?
Assaf Muller, Cloud Networking Engineer
Red Hat
- Original Message -
From: "Andrew Lau"
To: "users"
Sent: Sunday, December 1, 2013 4:55:32 AM
Subject: [Users] Keepalived on oVirt Hosts has engine networking issues
Hi,
I have the scenario where I
Hi,
I have the scenario where I have gluster and ovirt hosts on the same box,
to keep the gluster volumes highly available incase a box drops I'm using
keepalived across the boxes and using that IP as the means for the storage
domain. I documented my setup here in case anyone needs a little more i
6 matches
Mail list logo