Le 22/08/2016 à 08:10, Ramesh Nachimuthu a écrit :
Now, I can smoothly configure their NICs.
Doing all this, I saw that oVirt detected there already was
existing gluster cluster and volume, and integrated it in oVirt.
Then, I was able to create a new storage domain in this
On 08/22/2016 11:24 AM, Sahina Bose wrote:
On Fri, Aug 19, 2016 at 6:20 PM, Nicolas Ecarnot > wrote:
Le 19/08/2016 à 13:43, Sahina Bose a écrit :
Or are you adding the 3 nodes to your existing cluster? If
so, I
On Fri, Aug 19, 2016 at 6:20 PM, Nicolas Ecarnot
wrote:
> Le 19/08/2016 à 13:43, Sahina Bose a écrit :
>
>
> Or are you adding the 3 nodes to your existing cluster? If so, I suggest
>> you try adding this to a new cluster
>>
>> OK, I tried and succeed to create a new
Le 19/08/2016 à 13:43, Sahina Bose a écrit :
Or are you adding the 3 nodes to your existing cluster? If so, I
suggest you try adding this to a new cluster
OK, I tried and succeed to create a new cluster.
In this new cluster, I was ABLE to add the first new host, using
its
On Fri, Aug 19, 2016 at 2:33 PM, Nicolas Ecarnot
wrote:
> Le 19/08/2016 à 09:55, Sahina Bose a écrit :
>
>
>
> On Fri, Aug 19, 2016 at 12:29 PM, Nicolas Ecarnot
> wrote:
>
>> Hello,
>>
>> I'm digging out this thread because I now had the time to work on
Hello,
I'm digging out this thread because I now had the time to work on this
subject, and I'm stuck.
This oVirt setup has a standalone engine, and 3 hosts.
These 3 hosts are hypervisors and gluster nodes, each using one NIC for
all the traffic, that is a very bad idea. (Well, it's working,
Hi Ivan, Nathanaël and everyone,
Today, I finally upgraded this oVirt 3.5.2 into 3.6.1, and I saw
appearing the gluster network in the networks settings.
I'm not using it yet because I still have questions.
I think I perfectly understood your answer, but there are points I'd
like to know
Hi Nicolas,
what works for me in 3.6 is creating a new network for gluster within
oVirt, marking it for gluster use only, optionally setting bonded
interface upon NIC's that are dedicated for gluster traffic and
providing it with an IP address without configuring a gateway, and then
Hello,
[Here : oVirt 3.5.3, 3 x CentOS 7.0 hosts with replica-3 gluster SD on
the hosts].
On the switchs, I have created a dedicated VLAN to isolate the glusterFS
traffic, but I'm not using it yet.
I was thinking of creating a dedicated IP for each node's gluster NIC,
and a DNS record by
Hello Nicolas,
Did you have a look to this :
http://www.ovirt.org/Features/Select_Network_For_Gluster ?
But it is only available from >=3.6...
Le 27/11/2015 17:02, Nicolas Ecarnot a écrit :
Hello,
[Here : oVirt 3.5.3, 3 x CentOS 7.0 hosts with replica-3 gluster SD on
the hosts].
On the
10 matches
Mail list logo