[ovirt-users] Re: ovirt

Hi, Since the volume is full you will not be able to do any kind of file operations until some space is free. Go to Storage -> Disks in ui and find a disk which you are sure is safe to delete and you won't miss it. Note down the disk id. locate the disk directory under the volume mount. cd /rhev/

[ovirt-users] Re: Ovirt

Ifconfig isn’t standard with centos7. You should be using the ip command like ip addr for example You can get ifconfig if you install the net-tools package but I would advise against installing additional packages on node hosts. On Sun, Jun 30, 2019 at 11:13 AM wrote: > Hello > > Please, I need

[ovirt-users] Re: Ovirt

ifconfig is deprecated and you need additional rpms to get it.In order to find the necessary rpm:yum whatprovides "*/ifconfig" Of course, you have to get used with the new "ip" command instead. Best Regards,Strahil Nikolov В неделя, 30 юни 2019 г., 10:13:04 ч. Гринуич-4, ioabdoulrahamaneapp

[ovirt-users] Re: Ovirt consulting

Hello, You may ask to smile (https://www.smile.eu/fr) or alterway ( https://www.alterway.fr/ , Le 01/06/2018 à 12:41, Jonathan Del Campo a écrit : Hello, I am looking for a specialized Ovirt partner in France in order to operate a migration of our system from 3.x to 4.x. Can someone reco

[ovirt-users] Re: ovirt error

Hi Can you share some more information about your enviroment ? 1. Stack (ovirt,libvirt,vdsm, etc) 2. What is your setup ? 3. Did you do any steps like upgrade/add an additional host ? If possible, please share agent and vdsm logs. I would check for starters the status of the agent service (e.g.

[ovirt-users] Re: ovirt error

> > I would check for starters the status of the agent service (e.g. systemct > > ovirt-ha-agent > > -> systemctl status ovirt-ha-agent On Mon, Jun 11, 2018 at 11:00 AM, Yanir Quinn wrote: > Hi > Can you share some more information about your enviroment ? > 1. Stack (ovirt,libvirt,vdsm, etc)

[ovirt-users] Re: oVirt Metrics

-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Hi Shirly, I could one more try to install it. The firsts few attempts leads to long discussion in the mailing list and I was not able to get it working . On the other hand I do not have time to finish integration with the zabbix ;( regard

[ovirt-users] Re: oVirt Metrics

Hello, Good morning Shirley. I am have one doubt , for collecting metrics need install agents in vms?. Very thanks. Marcelo Leandro ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https:

[ovirt-users] Re: oVirt Metrics

Hi, i'm trying to install oVirt Metrics following the installation guide (h ttps://www.ovirt.org/develop/release- management/features/metrics/metrics-store-installation/) but i have some issues running deploy cluster from here https://www.ovirt.org/deve lop/release-management/features/metrics/sett

[ovirt-users] Re: oVirt Metrics

On Jun 11, 2018 13:59, Shirly Radco wrote:Dear users,I would love to get some feedback if someone has tried to install and use the oVirt metrics store, released in 4.2, for collecting metrics and logs, based on Elasticsearch, Kibana, Collectd and Fluentd on top of OpenShift.https://www.ovirt.org/d

[ovirt-users] Re: oVirt Metrics

On Mon, Jun 11, 2018, 6:59 PM Karli Sjöberg wrote: > > > On Jun 11, 2018 13:59, Shirly Radco wrote: > > Dear users, > > I would love to get some feedback if someone has tried to install and use > the oVirt metrics store, released in 4.2, for collecting metrics and logs, > based on Elasticsearch,

[ovirt-users] Re: oVirt Metrics

On Jun 11, 2018 19:00, Yaniv Kaul wrote:On Mon, Jun 11, 2018, 6:59 PM Karli Sjöberg wrote:On Jun 11, 2018 13:59, Shirly Radco wrote:Dear users,I would love to get some feedback if someone has tried to install and use the oVirt metrics store, released in 4.

[ovirt-users] Re: oVirt Metrics

On Mon, Jun 11, 2018, 9:13 PM Karli Sjöberg wrote: > > > On Jun 11, 2018 19:00, Yaniv Kaul wrote: > > > > On Mon, Jun 11, 2018, 6:59 PM Karli Sjöberg wrote: > > > > On Jun 11, 2018 13:59, Shirly Radco wrote: > > Dear users, > > I would love to get some feedback if someone has tried to install

[ovirt-users] Re: oVirt Metrics

On Tue, 2018-06-12 at 00:10 +0300, Yaniv Kaul wrote: > > > On Mon, Jun 11, 2018, 9:13 PM Karli Sjöberg > wrote: > > > > On Jun 11, 2018 19:00, Yaniv Kaul wrote: > > > > > > On Mon, Jun 11, 2018, 6:59 PM Karli Sjöberg > > > wrote: > > > > > > > > On Jun 11, 2018 13:59, Shirly Radco wrote: >

[ovirt-users] Re: oVirt Metrics

Hi, No need to install agents in the vms. Collectd virt plugin reports the statistics about the vms from the host. Best regards, -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On M

[ovirt-users] Re: oVirt Metrics

There is an option to log to the OpenShift admin portal. It is located at https://:8443 and same user and password. -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Mon, Jun 11, 201

[ovirt-users] Re: oVirt Metrics

Hi Rich, Are you families with this OpenShift installation issue? Best, -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Mon, Jun 11, 2018 at 4:20 PM, Carlos Rodrigues wrote: >

[ovirt-users] Re: oVirt Metrics

On Jun 12, 2018 10:41, Shirly Radco wrote:There is an option to log to the OpenShift admin portal.It is located at https://:8443and same user and password.Indeed I know about the OpenShift console, however my question was about any Kubernetes console, if that is installed and available?/K--SHIRLY 

[ovirt-users] Re: oVirt Metrics

-- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Tue, Jun 12, 2018 at 11:43 AM, Shirly Radco wrote: > Hi Rich, > > Are you families with this OpenShift installation issue? > famili

[ovirt-users] Re: oVirt Metrics

http://post-office.corp.redhat.com/archives/aos-devel/2018-June/msg00195.html " It smells like https://access.redhat.com/solutions/3480921 / https://bugzilla.redhat.com/show_bug.cgi?id=1583500 to me. " I think the workaround is to add oreg_url=registry.access.redhat.com/openshift3/ose-${compone

[ovirt-users] Re: oVirt Metrics

Sorry, did not mean to send an internal link to an external list/address. On 06/12/2018 07:52 AM, Rich Megginson wrote: http://post-office.corp.redhat.com/archives/aos-devel/2018-June/msg00195.html " It smells like https://access.redhat.com/solutions/3480921 / https://bugzilla.redhat.com/show

[ovirt-users] Re: oVirt Metrics

Thank you Rich, w'll try this workaround and tell you later. Regards, Carlos Rodrigues On Tue, 2018-06-12 at 07:54 -0600, Rich Megginson wrote: > Sorry, did not mean to send an internal link to an external > list/address. > > On 06/12/2018 07:52 AM, Rich Megginson wrote: > > http://post-office.c

[ovirt-users] Re: ovirt error

Great :) Can you share what was the issue and the solution ? On Wed, Jun 13, 2018 at 10:11 AM, Арслан wrote: > Thanks, I solved the problem. > > С уважением, > Кубанов Арслан > Инженер > Департамент сетевой интеграции > ЛАНИТ129075, г. Москва, Мурманский проезд, д. 14 >

[ovirt-users] Re: oVirt Metrics

Does it provides metrics for the guest? like CPU, Memory, disk IO etc? On Mon, Jun 11, 2018 at 2:57 PM Shirly Radco wrote: > Dear users, > > I would love to get some feedback if someone has tried to install and use > the oVirt metrics store, released in 4.2, for collecting metrics and logs, > b

[ovirt-users] Re: oVirt Metrics

It includes the metrics for the vms using the collectd virt plugin. CPU, Memory, disk IO etc. Best regards, -- SHIRLY RADCO BI SeNIOR SOFTWARE ENGINEER Red Hat Israel TRIED. TESTED. TRUSTED. On Thu, Jun 14, 2018 at 1

[ovirt-users] Re: oVirt Metrics

This is a different error than the one described in the links below:     "5m  1h   128 webconsole-84466b9d97-s4x28.153776d1bf88b3a4 Pod   Warning   FailedCreatePodSandBox   kubelet, openshift-ied.install.etux   Failed create pod sandbox: rpc error: code = Un

[ovirt-users] Re: oVirt Metrics

Hi, I'm behind a proxy. After configure docker to use proxy, the following command run well: sudo docker pull docker.io/openshift/origin-pod:v3.9.0 Thank you. Regards, Carlos Rodrigues On Thu, 2018-06-14 at 13:43 -0600, Rich Megginson wrote: > This is a different error than the one described i

[ovirt-users] Re: oVirt Metrics

Are you able to install and run ovirt metrics successfully? On 06/15/2018 02:27 AM, Carlos Rodrigues wrote: Hi, I'm behind a proxy. After configure docker to use proxy, the following command run well: sudo docker pull docker.io/openshift/origin-pod:v3.9.0 Thank you. Regards, Carlos Rodrigues

[ovirt-users] Re: oVirt Metrics

on the metrics machine, log in as root oc project kube-service-catalog oc get pods you should have a pod named apiserver-x oc logs apiserver-x oc describe pod apiserver-x oc describe ds apiserver On 06/15/2018 07:02 AM, Carlos Rodrigues wrote: I'm able to go forward in installat

[ovirt-users] Re: oVirt Metrics

this is the result of execution of following commands: [root@openshift-ied ~]# oc project kube-service-catalogNow using project "kube-service-catalog" on server "https://openshift-ied.install .etux:8443".[root@openshift-ied ~]# oc get podsNAME READY STATUSRESTARTS AG

[ovirt-users] Re: oVirt Metrics

On 06/15/2018 08:39 AM, Carlos Rodrigues wrote: this is the result of execution of following commands: [root@openshift-ied ~]# oc project kube-service-catalog Now using project "kube-service-catalog" on server "https://openshift-ied.install.etux:8443";. [root@opens

[ovirt-users] Re: ovirt error

Thanks, I solved the problem. С уважением, Кубанов Арслан Инженер Департамент сетевой интеграции ЛАНИТ 129075, г. Москва, Мурманский проезд, д. 14, корп. 1 Тел.: +7 (495) 967-6650 #18287 www.lanit.ru 11.06.2018 11:01, Yanir Quinn пишет: I would check for starters the status of the agent se

[ovirt-users] Re: ovirt error

Yes. I have old version ovirt 3.5 and distributive centos6. I know what this old, but no upgrade possible. hosted_engine works on glusterfs and glusterfs cluster was split brain. С уважением, Кубанов Арслан Инженер Департамент сетевой интеграции ЛАНИТ 129075, г. Москва, Мурманский проезд, д. 14

[ovirt-users] Re: oVirt Metrics

Looks like apiserver has some problem connecting to the etcd service.  Could be a host networking or firewall issue.  Please review the network, firewall, etc. configuration at https://docs.openshift.org/3.9/install_config/install/prerequisites.html#prereq-network-access On 06/15/2018 08:51 AM

[ovirt-users] Re: oVirt Metrics

I did set it up yesterday and I intent to use it. Setup worked ok on Centos 7.5. Only problem was with depency of ansible for centos-openshift-origin39-candidate, which I had to deactivate from repos. It did work though and I am getting reports now. Anyway is there a way to "relax" the amount o

[ovirt-users] Re: oVirt Metrics

Hi, I'm so happy you managed to get it working for you. I'm aware of the ansible version issue and the Openshift team is working to fix it. Currently ansible 2.5.5 and 2.5.6 seem to be working ok. Yes. You can add to the /etc/ovirt-engine-metrics/config.yml collectd_interval: 20 (The default is

[ovirt-users] Re: oVirt Metrics

Very usefull information thank you ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/

[ovirt-users] Re: oVirt Metrics

Very usefull information thank you! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about

[ovirt-users] Re: Ovirt VDI

On Tue, Nov 13, 2018 at 4:48 PM, Hari Prasanth Loganathan wrote: > Hi Team, > > I created a VM which has one disk. > For this VM, I created two Virtual Desktop (VDI_1 and VDI_2) using open-UDS > and it created successfully. I never heard about anyone using openuds with oVirt, no idea how it work

[ovirt-users] Re: Ovirt VDI

>From a quick overview on the project, is seems like openuds will create new VMs based on another machine VM (a template) so I don't see why a file on machine1 should be on machine2 unless you using a shared storages with is mounted to both machines like a network drive and you write the file there

[ovirt-users] Re: Ovirt VDI

It is perfect, It creates new disk, uses the configuration of CPU and also assigns separate memory. Thanks, both of you. On Wed, Nov 14, 2018 at 12:47 PM Rabin Yasharzadehe wrote: > From a quick overview on the project, is seems like openuds will create > new VMs based on another machine VM (a

[ovirt-users] Re: oVirt monitoring

Hello George, you should be able to query the DWH, depending how it's configured you should be able to query hourly/daily statistics for up to 5 years. https://www.ovirt.org/documentation/data-warehouse/chap-About_History_Database_Reports_and_Dashboards/ There are also

[ovirt-users] Re: oVirt noVNC

Hello Anton, if your organisation has it's own CA you can install your own certificates or get certificates from a trusted CA. https://www.ovirt.org/documentation/admin-guide/appe-oVirt_and_SSL.html Paul S. From: Anton Louw via Users Sen

[ovirt-users] Re: oVirt noVNC

Hi Paul, Thanks for the reply. Apologies, I should have added that I have installed our own certificates. The main problem I am facing is that the noVNC console just refuses to open, I get the attached error with any VM I try and access. I should have perhaps started with this issue in my first

[ovirt-users] Re: oVirt noVNC

No worries, If all is pointing to the correct files I would check permissions. Regards, Paul S. From: Anton Louw Sent: 12 June 2020 09:34 To: Staniforth, Paul ; users@ovirt.org Subject: RE: oVirt noVNC Caution External M

[ovirt-users] Re: oVirt noVNC

to download the CA, the novnc browser option should just open the VM, if the settings are right. From: Anton Louw via Users Reply to: Anton Louw Date: Friday, 12 June 2020 at 10:48 To: "Staniforth, Paul" , "users@ovirt.org" Subject: [ovirt-users] Re: oVirt noVNC Hi P

[ovirt-users] Re: oVirt noVNC

: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Kim Kargaard Sent: 12 June 2020 10:51 To: Anton Louw ; Staniforth, Paul ; users@ovirt.org Subject: Re: [ovirt-users] Re: oVirt noVNC Have you checked that websocket proxy is configured and

[ovirt-users] Re: oVirt noVNC

From: Anton Louw Date: Friday, 12 June 2020 at 11:36 To: Kim Kargaard , "Staniforth, Paul" , "users@ovirt.org" Subject: RE: [ovirt-users] Re: oVirt noVNC Hi Kim, Thanks for the reply. I double checked the permissions on the cert files now, and they are exactly

[ovirt-users] Re: oVirt noVNC

__ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg anton.l...@voxtelecom.co.za www.vox.co.za From: Kim Kargaard Sent: 12 June 2020 11:43 To: Anton Louw ; Staniforth, Paul ; users@ovirt.org Subject: Re: [ovirt-users] Re: oVirt noVNC Hi Anton, Don´t

[ovirt-users] Re: oVirt noVNC

Hi Paul, Double checked the permissions as well. All seems to be fine. The only thing that does look different between the environments are the below: ENV1 (Not working) [cid:image001.png@01D640B1.B1BEAA20] ENV2 (Working) [cid:image007.png@01D640B1.E97498D0] It seems that on the working envir

[ovirt-users] Re: oVirt noVNC

Yes, in the end, it was a permission on the one CA file, that was set to 700 and should have been 750 (if I remember correctly). From: Anton Louw Date: Friday, 12 June 2020 at 12:01 To: Kim Kargaard , "Staniforth, Paul" , "users@ovirt.org" Subject: RE: [ovirt-users] Re:

[ovirt-users] Re: oVirt noVNC

Yes Anton, I think it's in the documentation it's Steps 2 & 3 * * The Engine has been configured to use /etc/pki/ovirt-engine/apache-ca.pem, which is symbolically linked to /etc/pki/ovirt-engine/ca.pem. Remove the symbolic link. # rm /etc/pki/ovirt-engine/apache-ca.pem

[ovirt-users] Re: oVirt noVNC

Thanks Paul, So the symbolic link has then been removed, as per the below. Not quite sure where to go from here. Anton Louw Cloud Engineer: Storage and Virtualization __ D: 087 805 1572 | M: N/A A: Rutherford Estate, 1 Scott Street, Waverley, Johannesburg ant

[ovirt-users] Re: oVirt noVNC

Sorry Anton, I'm trying to get a lot of things sorted before the weekend. This seems the wrong way round, if you follow the documentation you shouldn't have the symbolic link on the working system unless you replaced the file it was pointing to. Do you have certificate

[ovirt-users] Re: oVirt noVNC

telecom.co.za > >www.vox.co.za > > > >From: Anton Louw via Users >Sent: 17 June 2020 06:58 >To: Staniforth, Paul ; users@ovirt.org >Subject: [ovirt-users] Re: oVirt noVNC > > >Hi Paul, > >Apologies for the late response. > >So we only have a cert bund

[ovirt-users] Re: oVirt noVNC

Sent: 22 June 2020 12:34 To: Anton Louw ; Staniforth, Paul Cc: users@ovirt.org Subject: Re: [ovirt-users] Re: oVirt noVNC It's the client's browser settings , but I think it's easier to either change the certificate to something that will be trusted, or to just import it. Best R

[ovirt-users] Re: ovirt+SDN

On Mon, Jul 20, 2020 at 5:11 PM Marco Mangione wrote: > hello, > > anyone are using OVIRT with a SDN controller? > Which scenario do you want to address? oVirt includes ovirt-provider-ovn, which supports isolated networks > ___ > Users mailing list -

[ovirt-users] Re: oVirt networking.

Hi 1) trunk all the network including management, VM traffic subnets in both ports and tag the management network as native 2) configure the bonds with active/backup with management IP while installing the OS 3) proceed the hosted engine installation in the same management network 4) once host

[ovirt-users] Re: oVirt-node

Il giorno lun 12 ott 2020 alle ore 12:36 Budur Nagaraju ha scritto: > Hi > > Is there a way to deploy vms on the ovirt node without using the oVirt > engine? > Hi, if you mean: "Can I use oVirt Node for running VMs without using oVirt Engine?" then yes, you can. oVirt Node is a CentOS Linux de

[ovirt-users] Re: oVirt-node

Have logged in using cockpit but unable to create vms, is the behavior is like that? We can't use cockpit to create vms? Thanks, Nagaraju On Mon, Oct 12, 2020, 5:35 PM Sandro Bonazzola wrote: > > > Il giorno lun 12 ott 2020 alle ore 12:36 Budur Nagaraju > ha scritto: > >> Hi >> >> Is there a

[ovirt-users] Re: oVirt-node

Il giorno lun 12 ott 2020 alle ore 14:20 Budur Nagaraju ha scritto: > Have logged in using cockpit but unable to create vms, is the behavior is > like that? > > We can't use cockpit to create vms? > yum install http://mirror.centos.org/centos/8/AppStream/x86_64/os/Packages/cockpit-machines-211

[ovirt-users] Re: oVirt-node

Hi Sandro, Have not installed a hosted engine nor have installed an ovirt engine , have just installed an ovirt node in one of the bare metal servers and logged into the server using a cockpit. When I browse to ovirt virtual machine "create New vm' is greyed out, is ovirt node dependent on the ovi

[ovirt-users] Re: oVirt-node

Hi Badur, theoretically it's possible as oVirt is just a management layer. You can use 'virsh -c qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf' as an alias of virsh and then you will be able to "virsh define yourVM.xml" & "virsh start yourVM". Also it's suitable to start a

[ovirt-users] Re: oVirt-node

zzola" To: "Budur Nagaraju" Cc: "users" Sent: Monday, October 12, 2020 5:05:01 AM Subject: [ovirt-users] Re: oVirt-node Il giorno lun 12 ott 2020 alle ore 12:36 Budur Nagaraju < [ mailto:nbud...@gmail.com | nbud...@gmail.com ] > ha scritto: Hi Is there a

[ovirt-users] Re: ovirt question

Hi, I would start with  https://www.ovirt.org/documentation/installing_ovirt_as_a_self-hosted_engine_using_the_cockpit_web_interface/ . It might have some issues as 4.4 is quite fresh and dynamic, but you just need to ping the community for help over the e-mail. Best Regards, Strahil Nikolov

[ovirt-users] Re: ovirt question

Hi, Read the docs at: https://ovirt.org/documentation/ For installation, in my experience, the most stable solution is to use a dedicated VM or physical host for running the oVirt engine(management system): https://ovirt.org/documentation/installing_ovirt_as_a_standalone_manager_with_local_data

[ovirt-users] Re: ovirt-engine

On Fri, Jun 28, 2019 at 3:02 PM wrote: > Hi, I am installing an ovirt 4.2 self hosted engine on gluster > hyperconverged (3 centos nodes) > When, after the gluster configuration, I start the deploy the > hosted-engine tool return > > > [ ERROR ] ERROR! 'delegate_to' is not a valid attribute for

[ovirt-users] Re: oVirt tools

Hi, I don't think it is related to the wgt installer but to the vitio-win drivers adding @Vadim Rozenfeld and @Gal Hammer On Fri, Aug 2, 2019 at 4:32 PM wrote: > Greetings, > > After installing oVirt tools on my w2016 virtual server I've noticed that > all devices (nic, disks, etc.) are conn

[ovirt-users] Re: oVirt tools

On Sun, 2019-08-04 at 11:55 +0300, Gal Zaidman wrote: > Hi, > I don't think it is related to the wgt installer but to the vitio-win > drivers adding @Vadim Rozenfeld and @Gal Hammer Unfortunately there is no easy way to make a virtio device non- ejectable at the system level.However you can try

[ovirt-users] Re: oVirt tools

Greetings, Thank you for your reply. I do know there is such option in vSphere (you need to modify vm config file for this). Does this option for oVirt is on the roadmap? С уважением, Иванов Алексей. On Mon, Aug 5, 2019 at 5:31 AM Vadim Rozenfeld wrote: > On Sun, 2019-08-04 at 11:55 +0300, Ga

[ovirt-users] Re: oVirt tools

On Mon, 2019-08-05 at 16:09 +0300, Алексей Иванов wrote: > Greetings, > Thank you for your reply. I do know there is such option in vSphere > (you need to modify vm config file for this). Does this option for > oVirt is on the roadmap? > Hi Alexey.Honestly, I don't recall if we ever were asked to

[ovirt-users] Re: oVirt + Gluster

On the opposite - ovirt supports up to v6 of gluster and in cockpit, you can setup your hyperconverged setup (on gluster) abd your hosted engine ontop. Best Regards, Strahil NikolovOn Sep 23, 2019 07:20, TomK wrote: > > Hey All, > > Seeing GlusterFS up to version 7, do any of the oVirt versions

[ovirt-users] Re: oVirt + Gluster

Thanks Strahil! Search results return info where only Gluster 3.X is supported. Sometime back I asked if a specific version of Gluster was available having issues with GFS 4.1. Was told to wait up a bit even though the wiki pages indicated GFS 3.3+ is supported. https://lists.ovirt.org/archi

[ovirt-users] Re: oVirt + Gluster

Current oVirt node-ng uses 6 ]# yum list installed |grep gluster gluster-ansible-cluster.noarch1.0.0-1.el7 installed gluster-ansible-features.noarch 1.0.5-3.el7 installed gluster-ansible-infra.noarch 1.0.4-3.el7 installed gluster-ansible-maintenanc

[ovirt-users] Re: oVirt + Gluster

Recently both oVirt node and Hypervisor have moved to gluster v6 (although I have moved a little bit earlier). For me v6 of Gluster is quite stable and if you dig up really nice , you will be able to even setup 'gtop' which gives great info. Ovirt is quite well integrated with gluster - doing h

[ovirt-users] Re: ovirt upgrade

Hi You can refer to 4.3 upgrade guide: https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/upgrade_guide/index On Thursday, December 19, 2019, David David wrote: > hi all > > how do upgrade from 4.2.5 to 4.3.7 ? > what steps are necessary, are the same as when upgradin

[ovirt-users] Re: Ovirt backup

Good backup products for ovirt seem hard to come by. If you want to backup 10 or less vms I’d recommend vprotect as it’s free. It works great but it’s costly for a license above 10 vms. On Sun, Jan 19, 2020 at 5:08 AM Nazan CENGİZ wrote: > Hi all, > > > I want to back up Ovirt for free. Is there

[ovirt-users] Re: Ovirt backup

Hi Nazan,there is a ovirt HostedEngine backup tool , for everything else you have to use external products or your own scripts. Best Regards,Strahil Nikolov В неделя, 19 януари 2020 г., 13:01:00 ч. Гринуич+2, Jayme написа: Good backup products for ovirt seem hard to come by. If you wan

[ovirt-users] Re: Ovirt backup

I am still using https://github.com/wefixit-AT/oVirtBackup but since support for the v3 API will be removed with oVirt 4.4 it will stop working with this release. For this reason I can no longer recommend it but it served me well the past few years. There is also https://github.com/jb-alvarado

[ovirt-users] Re: Ovirt backup

The biggest problem with these tools is that they are very inefficient. To work they snapshot the VM then clone the snapshot into a new VM, back it up then delete. This takes a lot of space and time. vProtect and some other enterprise backup software snapshot the VM and stream the snapshot from

[ovirt-users] Re: Ovirt backup

That's what VEPA Backup is also doing and is widely used in the Enterprise.It depends of the type of storage you use. For example , file-based storage (NFS, Gluster) is easy - you can just copy the snapshot and then delete. Yet , for block-based storage the only working solution I have seen to b

[ovirt-users] Re: Ovirt backup

Well there is also https://github.com/vacosta94/VirtBKP (See http://blog.infratic.com/create-ovirtrhevs-vm-backup/) which is taking an image based approach which I assume might be faster. Again, I have not tried it myself. I personally prefer to have an easy to restore VM on the export storage

[ovirt-users] Re: Ovirt backup

So far for me - vProtect has been the easiest and most seamless to use, along with having some other handy 'included' features (like the application backup) and having a central server with remote nodes so you can have one management server for multiple DC / Cluster environments. Still uses sna

[ovirt-users] Re: Ovirt backup

Le 19/01/2020 à 18:38, Jayme a écrit : The biggest problem with these tools is that they are very inefficient.  To work they snapshot the VM then clone the snapshot into a new VM, back it up then delete.  This takes a lot of space and time. vProtect and some other enterprise backup software

[ovirt-users] Re: Ovirt backup

Looking at oVirt ansible roles, I wonder if it would be easy to implement VM backups using the ovirt-snapshot-module to create a VM snapshot and download it. On Mon, Jan 20, 2020 at 5:04 AM Nathanaël Blanchet wrote: > > Le 19/01/2020 à 18:38, Jayme a écrit : > > The biggest problem with these to

[ovirt-users] Re: Ovirt 4.3

Il giorno gio 23 gen 2020 alle ore 11:35 ha scritto: > I set up the repository as per Ovirt instructions on Centos 7 x64, but > when I yum install ovirt-engine I get missing dependencies. > Hi, can you please point me to the instructions you followed for reaching this situation? I would like to

[ovirt-users] Re: Ovirt 4.3

When I run the command yum install ovirt-engine. Originally, when I tried to run the command, I received package not foumd. When I looked at the repo, it was using fc$releaseserver and I changed it to el$releaseserver. I’m not sure why the repo defaults to fedora but it was looking for a fedora

[ovirt-users] Re: Ovirt 4.3

Once I enabled the sclo repo it worked. yum install centos-release-scl-rh Eric Evans Digital Data Services LLC. 304.660.9080 From: eev...@digitaldatatechs.com Sent: Thursday, January 23, 2020 6:06 PM To: 'Sandro Bonazzola' Cc: 'users' Subject: [ovirt-

[ovirt-users] Re: ovirt upgrade

2019-12-19 11:04 GMT+04:00, Amit Bawer : > Hi > You can refer to 4.3 upgrade guide: > > https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.3/html/upgrade_guide/index > > On Thursday, December 19, 2019, David David wrote: > >> hi all >> >> how do upgrade from 4.2.5 to 4.3.7 ? >>

[ovirt-users] Re: ovirt upgrade

Hi, that looks like a special RdeHat Package. If you do not have installed RHV but oVirt you need to refer the manualy upgrade documentation, especialy chapter 9 ( upgrade 4.2 to 4.3). Spare all RedHat related parts (if you not have RHV) an it will work fine. https://access.redhat.com/documentati

[ovirt-users] Re: Ovirt Maximums

On Fri, Nov 30, 2018 at 4:21 PM Brian Wilson wrote: > Is there a resource available that would describe the configurable > maximums for the Ovirt Engine and Ovirt Nodes. > > Things like: > How many Logical Networks per host? > > > If one does not exist does anyone have any experiences with reachi

[ovirt-users] Re: Ovirt Maximums

Great thanks for this information, and total bonus about the VDS Timeout info as i was seeing that and hadn't started to dig into it good to know that as well. Brian ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...

[ovirt-users] Re: ovirt agent

On Mon, Dec 17, 2018 at 10:14 AM wrote: > i am trying to install ovirt agent on ubuntu and try to open this documnet > but it does not work and this page will appear : > https://www.ovirt.org/develop/ > can the ovirt team fixed that or there is new thing other than agent ? > Only guest agent; th

[ovirt-users] Re: oVirt QueryType

Also in this kind of message 7|0|12|https://engine.localdomain/ovirt-engine/webadmin/| E8B2AD24442204349EF795039C3B87E5| org.ovirt.engine.ui.frontend.gwtservices.GenericApiGWTService| runMultipleQueries| java.util.ArrayList/4159755760| org.ovirt.engine.core.common.queries.QueryType/2792480900| org

[ovirt-users] Re: oVirt QueryType

Hi Anastasiya, may I ask what are you trying to achieve with this profiling? I'm also still waiting for your answer to Dan in [1]. [1] https://lists.ovirt.org/archives/list/users@ovirt.org/thread/ZPJYRM2XPRPD54E7AWC2V53UZABPJFMY/ On Sun, 6 Jan 2019 at 16:08, Anastasiya Ruzhanskaya < anastasiya.r

[ovirt-users] Re: Ovirt configuration

I think you have to dedicate a whole disk for the node install, you maybe able to use customised partitioning but it's not recommended. Regards, Paul S. From: matteofedel...@gmail.com Sent: 30 January 2019 10:44 To: users@ovirt.org Subj

[ovirt-users] Re: Ovirt configuration

You should not install node image within glusterfs. Use a separate drive On Wed, Jan 30, 2019 at 8:31 AM Staniforth, Paul < p.stanifo...@leedsbeckett.ac.uk> wrote: > I think you have to dedicate a whole disk for the node install, you maybe > able to use customised partitioning but it's not recomm

[ovirt-users] Re: Ovirt configuration

So, 1) in this situation for example I will select only the first drive: http://oi65.tinypic.com/dysj07.jpg 2) with pvdisplay -m I'll check the devices name (sda first drive, sdb second drive) 3) https://ovirt.org/images/uarwo42-gdeploy-3.png?1519899774 and here in device name engine and vmstor

[ovirt-users] Re: Ovirt configuration

ah, not even with a corret partitioning? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/

[ovirt-users] Re: Ovirt configuration

ah, not even with a correct partitioning? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community

  1   2   3   4   5   6   7   8   9   10   >