Il giorno gio 9 mar 2023 alle ore 07:43 Yedidyah Bar David
ha scritto:
> Hi,
>
> Great job!
>
> Perhaps you'd like to post this somewhere more noticeable/findable?
>
> I'd love to say "E.g. on the oVirt blog", but I have absolutely no idea
> how that is updated. Adding Sandro...
>
For oVirt blog
Hi,
Great job!
Perhaps you'd like to post this somewhere more noticeable/findable?
I'd love to say "E.g. on the oVirt blog", but I have absolutely no idea
how that is updated. Adding Sandro...
Best regards,
On Thu, Mar 9, 2023 at 6:46 AM wrote:
>
> instead of downgrading microcode i did event
instead of downgrading microcode i did eventually enabled the needed CPU flag:
#> grubby --update-kernel=ALL --args="tsx=on"
#> grub2-mkconfig -o /etc/grub2.cfg
#> reboot
Reverse changes after change the default CPU type of the cluster:
set host in maintenance
#> grubby --update-kernel=ALL --remov
The deploy finished successfull now.
Task: upgrade oVirt 4.3 to oVirt 4.4
boundary conditions: access to repositories via repository server only (RH
Satellite), encapsulated management network (no connection outside this segment)
short steps i have done starting with an already installed host:
Next issue: CPU and microcode...
In oVirt 4.3 Broadwell and Skylake are suported. In EL8 microcode updates are
disabling the processor compatibility. This host can not be activated, because
CPU requirements are not met.
I hope i can downgrade the microcode package far enough to re-enable CPU
s
https://lists.ovirt.org/archives/list/de...@ovirt.org/message/SBCWNXLFLJBKTA3TFJARE7QCYZQ6QMMH/
that internal server error is because of updating to the latest updates
available xD
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email
> On Thu, Feb 16, 2023 at 12:19 PM
> 8.5? Where?
>
> RHV officially supports only RHEL 8.6, AFAIR.
>
> oVirt is tested regularly on Stream, so should most likely work on
> 8.7, or 8.8 when available.
>
>
> Not sure what you mean. vdsm is on the host, not on the engine vm.
the engine can not d
On Thu, Feb 16, 2023 at 12:19 PM wrote:
> Almost...
> The deploy went good, til this host was added. There is a bug that prevents
> vdsm to read the local configuration.
> I used RHEL 8.5 and did not update, because the latest update 7.9 made oVirt
> 4.2 inoperable. So i decided to use the versi
> On Wed, Feb 15, 2023 at 2:16 PM
> When was it usual to destroy it? I think it remains up since at least
> 4.3, perhaps much longer.
>
As i was moving (reinstall with restore) hosted storage to a new SAN (V 4.3),
the local VM was shut down before i could take action several times.
>
> Did you
On Wed, Feb 15, 2023 at 2:16 PM wrote:
>
> well, that's interesting...
> The deploy abortion did not destroy the local runing VM as usual.
When was it usual to destroy it? I think it remains up since at least
4.3, perhaps much longer.
> So i disabled CentOS-Stream-PowerTools.repo again (was re-e
well, that's interesting...
The deploy abortion did not destroy the local runing VM as usual. So i disabled
CentOS-Stream-PowerTools.repo again (was re-enabled by deploy), and provided my
modified oVirt repositories.
I ran engine-setup on the running local VM, setup checked for updates, nothing
On Wed, Feb 15, 2023 at 12:41 PM wrote:
>
> The backed up system is the latest 4.3 and the install sources of 4.4 are
> also the latest available.
>
> i used "offline" and "pause" , set up squid on the deploy host, modified the
> repository files in the fresh temporary engine VM to point to our
The backed up system is the latest 4.3 and the install sources of 4.4 are also
the latest available.
i used "offline" and "pause" , set up squid on the deploy host, modified the
repository files in the fresh temporary engine VM to point to our satellite. It
worked fine to the point the deploy d
On Tue, Feb 14, 2023 at 1:36 PM wrote:
>
> Hi,
> thank you for your answer, your hints are helpful
>
> > Hi!
> >
> > On Tue, Feb 14, 2023 at 12:40 PM >
> > It's not completely clear, what you are trying to do. I suppose you
> > refer to hosted-engine deployment with --restore-from-file.
> >
> I d
Hi,
thank you for your answer, your hints are helpful
> Hi!
>
> On Tue, Feb 14, 2023 at 12:40 PM
> It's not completely clear, what you are trying to do. I suppose you
> refer to hosted-engine deployment with --restore-from-file.
>
I do an upgrade vorm 4.3 to 4.4 according to the official oVirt
Hi!
On Tue, Feb 14, 2023 at 12:40 PM wrote:
>
> Hi,
> I want to upgrade oVirt 4.3 to oVirt 4.4. Thus i have to reinstall one node
> to EL8 an deploy the engine with restore.
It's not completely clear, what you are trying to do. I suppose you
refer to hosted-engine deployment with --restore-from
16 matches
Mail list logo