Hello Hanson,
Below is the procedure to replace the host with same FQDN where
existing host OS has to be re-installed. If the ovirt version you are
running is 4.0, steps 14 and 15 are not required. You could reinstall
the host from UI with HostedEngine->Deploy option.
*
1.
Move hos
Hi,
Pad [1] contains the procedure to replace the host with same FQDN
where existing host OS has to be re-installed.
[1] https://paste.fedoraproject.org/431252/47435076/
Thanks
kasturi.
On 09/20/2016 06:27 AM, Hanson wrote:
Hi Guys,
I encountered an unfortunate circumstance today. Poss
Hi Guys,
I encountered an unfortunate circumstance today. Possibly an achillies
heel.
I have three hypervisors, HV1, HV2, HV3, all running gluster for hosted
engine support. Individually they all pointed to HV1:/hosted_engine with
backupvol=HV2,HV3...
HV1 lost its bootsector, which was dis
Hi Fernando,
Not anything spectacular that I have seen, but I'm using 16GB minimum
each node.
Probably want to setup your hosted-engine as 2cpu, 4096mb ram. I believe
that's the min reqs.
Thanks,
Hanson
On 07/15/2016 09:48 AM, Fernando Frediani wrote:
Hi folks,
I have a few servers wit
Hi folks,
I have a few servers with reasonable amount of raw storage but they are
3 with only 8GB of memory each.
I wanted to have them with an oVirt Hyperconverged + Gluster mainly to
take advantage of the amount of the storage spread between them and have
ability to live migrate VMs.
Quest
5 matches
Mail list logo